KUKA's Edition robot assists new customers in price-sensitive shopping malls in the useful automation of welding tasks. Focus on the main points, have a higher cost-to-benefit ratio, and can obtain the skill set at that time. Initially, the KR CYBERTECH nano ARC will be available in two versions of the Edition robot, with more variants to follow.
The KUKA Edition robot relied on the skill set of the time, including the recently revised KR CYBERTECH nano series and the latest generation of controllers, the KR C5. Others include suitable welding software, such as KUKA. ArcTech Basic。 "We're not shrinking the norm, we're concentrating on tweaking it." Markus Hollfelder-Asam, Product Portfolio Manager at KUKA, explains. "With the Edition Robot, we have provided a robot that is technically reliable – lean, focused on the essentials, but ultimately still the original KUKA." This is an advantage especially for customers in highly dynamic and price-sensitive shopping malls who are in the early stages of automation: the adaptive planning of the Edition robot significantly reduces the cost of ownership.
The KR CYBERTECH nano ARC HW Edition robot has a useful load plan of 6 kg and can be mounted on the ground and on the ceiling. Because entry-level malls also have different requirements, the Edition robot is available in two variants: an effect range of up to 1440 mm (from January 2022) and 2010 mm (to be available by the end of 2022). In contrast to the standard version of the 50 mm hollow shaft wrist with a single side support, the Edition robot offers a hollow shaft wrist with a double support with a diameter of 46 mm and a repeatability of 0.06 mm. "This happens to be the right thing about the entry-level use of arc welding." Markus Hollfelder-Asam confirms.
"It is important to us to supply KUKA with the high quality that it has always had. This means: the hollow shaft wrist supports the precise positioning of the welding process and avoids additional agitation generalizations. In addition, as is common in the KR CYBERTECH nano series, the Edition robot is supplied with a maintenance-free cable kit. "The professionally proven quality meets all the requirements for entry-level welding: the Edition robot combines all the advantages. The models launched start with the KR CYBERTECH nano ARC HW Edition robot. More Edition bots will be rolled out consecutively.
|
More on that
|
KUKA robot practical skills zero point failure causes
1. Reasons for zero point failure:
Before analyzing the cause of zero-point failure, let's first clarify a problem.
For a long time, we have been calling this fault "zero point drop", which is an inaccurate description. The zero point parameter of the KUKA robot will not be "lost", it is documented ...
|
|
Advantages of KUKA Robot's standard four-axis industrial handling robot
Advantage:
Reasonable mechanical structure and compact design
4 degrees of freedom AC servo motors
Absolute position encoders
All shafts are equipped with holding brakes
Specific loads and inertia are designed to optimize speed and motion characteristics
The arm of the ...
|
|
How to set the load of the KUKA robot
1. Problems in the load setting of KUKA robots
In fact, there is only one intention, a suitable load, under the appropriate driving force, the manipulator can withstand enough moment of inertia regardless of static or dynamic to ensure that the electrical control system controls the manipulator.
and other machines ...
|
|
Can the teaching pendant of industrial robots be used universally - KUKA robots
The teaching pendant, also known as the teaching programmer or teaching box, is a hand-held device for manual operation, program writing, parameter equipment and monitoring of the robot; It is the core component of the robot control system, and is a device used to register and store mechanical movement or processing memory.
|
|
Robot welding speed and its parameters – KUKA robots
First, the robot welding speed
1. Robot welding can improve production efficiency
The six-axis welding robot has a short response time and fast action. The welding speed is 50-160cm/min, which is much higher than that of manual welding (40-60cm/min). The bot does not abort during operation. Only...
|
|
KUKA robot power-on explanation
Commentary: After the arrival of the KUKA robot, the customer can complete the initial power-on and normal operation of the robot according to the explanation process.
First, electrical connection
Second, the initial power-on
Third, safety equipment
Fourth, the robot zero-point proofreading
Fifth, IO equipment
...
|
|
A way to identify the advantages and disadvantages of a reducer – a KUKA robot
01 Transmission power: The output power decreases
Transmission power is one of the important evaluation indicators of reducer. To test the transmission power requires professional equipment, and it is difficult for customers to measure specific data, but it is possible to do horizontal comparison. Heating is the most intuitive comparison method, let's ...
|
|
Start the robot after external stop and stop – the KUKA robot
Abort the robot: Cut off the signal $drivers_Off, this abort is to break the robot servo.
Continue to start the robot after abort: Repeat the previous article "KUKA Robot External Active Start Equipment Method 1" process 4 and 5 to start the robot.
...
|
|
KUKA robots are processed in the form of motion axes
The boundary of robot operation is to move parts and things in space through a certain organization, and the needs naturally represent the position and posture of the parts, things, and the organization itself. In order to delimit and apply the mathematical quantities that represent potentials, it is necessary to delimit the coordinate system and give the rules of representation.
...
|
|
KUKA palletizing robots
KUKA palletizing robots are widely used to move goods to or from pallets (unloading palletizing) and to lift, palletize, pack, transport, sort and mark. This process is not only closely related to the wooden furniture industry, the food logistics sector, but also ...
|
|
KUKA bot syntax
Quiz of the KUKA robot
1. Check the syntax of the KUKA robot program:
---> the menu key File--->7CheckProgram
2. Programming Window (Test):
---> the menu key View--->5Test
(1) Function key:
TART: Initiation ...
|
|
Explanation of the BAS program of the KUKA robot
There is a program called BAS.SRC under the R1System in the KUKA robot program directory, which is mainly used to set the number of parameters related to the robot motion, such as coordinate system, velocity, acceleration, etc.
One. Online forms
Let's take a look at how to use the commonly used online form.
|
|
KUKA Industrial Robot won the Red Dot Award 2017
KUKA's industrial robot KR CYBERTECH has received the RedDot Award 2017 in the product planning category. The compactness achieved by the reduced size allows the robot to move quickly, even with extreme precision.
...
|
|
KUKA robots are prone to malfunctions
1. The KUKA robot does not supply power and has no response
2. KUKA robot 1-6 axis, any axis does not move, stuck
3. The KUKA robot crashes and the KUKA robot computer cannot be started and the computer does not respond
4、KU ...
|
|
The "axis" role of the six-axis tandem robot - KUKA robot
Traditional six-axis industrial robots generally have 6 degrees of freedom, including rotation (S-axis), lower arm (L-axis), upper arm (U-axis), wrist rotation (R-axis), wrist swing (B-axis) and wrist rotation (T-axis). The 6 joints are combined to achieve the 6 degrees of freedom movement at the end.
...
|
|
Maintenance of the control cabinet of KUKA robot systems
1. Protect content
1. Check the heat dissipation of the controller
It is forbidden to cover the manipulator with plastic or other materials; Leave a satisfying distance between the rear and side of the controller (>120mm); It is forbidden to place the controller close to the heat source; It is forbidden to put debris on the top of the controller; Prevent the controller from being too dirty; ...
|
|
The Kuka robot sets up a network connection
1. Fulfill X-Start to enter the boot application, in the boot application, click Settings, and the network connection dialog box appears.
2. If you choose not to use the IP address, please click not to use the IP address of the robot drive, if ...
|
|
Precautions for the operation of loading and unloading equipment – KUKA robots
The loading and unloading robot connects multiple punches and hydraulic presses together, reducing the investment in continuous stamping dies and high-speed punches, and realizing automatic continuous production with general equipment and molds. The loading and unloading manipulator can be connected with the coil active cutting system; The material can be vacuumed ...
|
|
Performance characteristics of KUKA industrial robots
1. Degrees of freedom and degrees of freedom are the main goals to measure the level of robotics. The so-called degrees of freedom refer to the independent motion of moving parts relative to a fixed coordinate system. Each degree of freedom requires a servo axis to drive, so the higher the number of degrees of freedom, the more chaotic the robot can complete the actions ...
|
|
The main precautions for welding with KUKA robots
1. It is necessary to conduct teaching assignments
Before the robot performs active welding, it is necessary for the operator to teach the robot the track of the welding gun and set the welding conditions.
Because it is necessary to teach, the robot does not weld to a wide range of products produced in a small number of products.
2. There must be ...
|
|
Contact
working hours
