In the field of industrial automation, grippers are a common and important tool. The role of the gripper is to clamp and fix objects, and are used for applications such as automatic installation, material handling and processing. And among the types of grippers, electric grippers and pneumatic grippers are two common picks. So, what are the advantages of electric grippers over pneumatic grippers?
First of all, the electric gripper is more sensitive in terms of operation. In contrast, pneumatic grippers use compressed air as a power source, while electric grippers can directly use electrical energy. This means that the electric gripper can be installed and commissioned more easily without having to worry about the supply of air. In addition, the electric gripper has higher control accuracy, and can be adjusted to achieve more precise clamping force and clamping time by adjusting parameters such as current, voltage and speed. This makes the electric gripper suitable for applications where high clamping forces are required, such as fine installation and micromachining.
Secondly, the electric gripper has a higher working power. This is because the electric gripper allows for more precise manoeuvring and faster gripping and release of objects. In contrast, the clamping and discharging speed of the pneumatic gripper is constrained by the compressed air supply and conditioning, and the same efficient operation cannot be achieved. This makes the electric gripper more advantageous in the high-speed automatic production line, which can improve the production power and reduce the production cost.
In addition, the electric gripper has better stability and reliability. Pneumatic grippers are easily affected by problems such as air source pressure fluctuations and air leakage during operation, resulting in changes in clamping strength and instability. Because the electric gripper uses electrical energy as the power source, it can supply the clamping force more stably and will not be disturbed by external factors. This makes the electric gripper more reliable in applications where high clamping forces are required and stable clamping is required for long periods of time.
In addition, electric grippers can be used on a wider scale. The electric gripper can be sensitively adjusted and customized according to different job needs and object characteristics. For example, it is possible to adapt objects of different sizes, shapes and materials by changing different gripper heads or conditioning parameters. This makes the electric gripper suitable for a wide variety of industries and applications, including automotive manufacturing, electronics assembly, food processing, and more. However, because the pneumatic gripper is constrained by the air supply and conditioning, its application scale is relatively narrow.
In addition, the electric gripper has more functions and features. Some electric grippers are equipped with sensors and feedback systems that monitor the gripping force, gripping orientation and object condition in real time, thus providing greater precision and safety. In addition, some electric grippers also have the function of actively identifying and adjusting the size of the gripper, which can actively adjust the size of the gripper according to different operation needs, and improve the sensitivity and power of operation.
To sum up, compared with pneumatic grippers, electric grippers have the following advantages:
High operation sensitivity, high operating power, strong stability and reliability, wide application scale, rich functions and characteristics. These advantages make electric grippers widely used in the field of industrial automation, and gradually replace the traditional pneumatic grippers. With the continuous progress and innovation of science and technology, the performance and function of the electric gripper will continue to improve, providing more convenience and benefits for automatic production.
Whether it is high-speed operation on the production line, as well as in the field of fine installation and micromachining, the electric gripper shows its unique advantages. Through the use of electric grippers, companies can increase production power, reduce production costs, and achieve higher precision and more stable operation. Therefore, electric grippers are an ideal choice for those looking to improve their automation processes.
|
More on that
|
Industrial robot sensing system, control system - OTC
1. Touching part
The sensory part is like the five senses of human beings, providing a sense for the robot's operation and helping the robot's operation process to become more accurate. This part can be divided into two main systems:
(1) Sensory system
Feeling...
|
|
Control method of Odichi flexible robotic arm
1. Rigid treatment. The influence of elastic deformation of the structure on the motion of the rigid body of the structure is completely ignored. For example, in order to avoid excessive elastic deformation from damaging the stability and terminal positioning accuracy of the flexible robotic arm, the maximum angular velocity of NASA's remote-controlled spaceman movement is 0.5deg/s.
2. Feedforward ...
|
|
Odich at the 25th Essen Welding & Cutting Exhibition
On June 16, 2021, the 25th Beijing · Essen Welding and Cutting Exhibition kicked off at the Shanghai New International Expo Center. Oudixi brought welding products, solutions and handling robots to this exhibition, bringing new possibilities for welding.
...
|
|
Industrial robot system composition - OTC robot
(1) Control computer: the dispatching and command organization of the control system. Generally, microcomputers and microprocessors have 32-bit, 64-bit, etc.
(2) Teaching box: Teaching robot working trajectory and parameter setting and all human-computer interaction operations, with its own independent CPU and storage unit, and ...
|
|
Welding defects and common failures – OTC robots
The robot welding uses argon-rich mixed gas maintenance welding, and the welding defects presented in the welding process generally include welding deviation, undercut, porosity, etc., the specific analysis is as follows:
(1) The welding deviation may be due to the incorrect orientation of the welding or the problem of finding the welding gun. At this time, consider T...
|
|
Installation tutorial of OTC welding robot I/O board
The wiring method of the physical I/O signal line of the OTC welding robot relay equipment + I/O board is as follows:
1. Cut off the main power supply and circuit breaker on the control equipment.
2. Remove the back panel next to the control device.
...
|
|
What are the welding shielding gases of ODC robots
In the welding process, the shielding capacity is most commonly used in four gases - oxygen, argon, carbon dioxide and helium. Each of these gases has its own unique elements and characteristics, such as specific welding arc stability, desired characteristics, cost, and availability, which are all selected correctly ...
|
|
How to use the OTC robot step return instruction
Find an operation origin for the OTC welding robot: click "Program" on the teaching pendant, enter 9999, press "Acknowledge", press "Trek View", and the current process will flash yellow on the teaching pendant.
OTC Welding Robot Programming Process Tutorial Step 2:
Create an empty program ...
|
|
Welding technology for MAG welding – OTC Odihy
1. Insist on 1/4-3/8 inch wire rod elongation (the length of the wire protruding from the torch head).
2. Use small diameter welding wire when welding thin plates; When welding thick plates, large diameter welding wire and high-current welding machine are used. See welder recommendations ...
|
|
Commonly used materials for industrial robots - OTC Odichi
1. Ceramic: Ceramic materials have good quality, but brittleness, not easy to process, Japan has now trial-produced ceramic robot arm samples used on small high-precision robots.
2. Carbon Structural Steel and Alloy Structural Steel: This ...
|
|
OTC Odihi Teach Pendant Programming
**Step: How to create a program. Press the +, the program selection window will appear at this moment, and the selection list will appear, and you can see all the programs that have been programmed in the teach pendant. The number of the program currently in use that appears after the current program is filled in with a ...
|
|
OTC welding robot origin reset
When the OTC robot is being used, the encoder battery low alarm cannot be recovered, and the encoder orientation information is lost, it is necessary to reset the operation:
52 encoder failure encoder battery charge lo ...
|
|
The main requirement of the robot for the joint drive motor - OTC robot
1. Rapidity, the time from obtaining the command signal to the working state required by the completion of the instruction should be short. The shorter the moment of echoing the command signal, the higher the sensitivity of the electric servo system, and the better the fast response function, which is generally explained by the size of the electromechanical moment constant of the servo motor.
|
|
The relationship between ODS servos and robots
The servo motor is the driving device of the robot joint
The joint drive of the robot is inseparable from the servo system, and the more joints, the higher the flexibility and accuracy of the robot, and the more servo motors need to be used. The servo motor affects the robot's arm control, such as orientation, angle, etc.
|
|
Precautions when OTC welding robot welding brass and aluminum
When the OTC welding robot solders copper, first check whether it is a DC welding machine, because the copper welding is as much as possible with a DC argon arc welding machine.
When welding copper, use phosphor copper electrode as filler, first use a welding gun to copy the workpiece, and then participate in the welding rod when it is melted, this is because the phosphor copper electrode ...
|
|
Description of the common keys of the Odish robot teach pendant
1. The axis key for controlling the movement of the junction is mainly used to adjust the orientation and viewpoint of the robot and the welder. When the SW switch is pressed, the cooperative coordinates can be used to control the robot's orientation.
2. The coordinate switch button can be used in the axis ...
|
|
OTC welding robot selection welding wire requirements
The robot can be supplied with barrel or disc wire as required. In order to reduce the frequency of replacing the welding wire, the robot should use barreled welding wire, but due to the selection of barreled welding wire, the wire feeding hose is very long, the resistance is large, and the quality requirements such as the stiffness of the welding wire are high.
...
|
|
Welding robot control system - ODS
The hardware of the microcomputer control system of a welding robot is mainly composed of the interface circuit of the S7-200 PLC microcomputer controller and the sensors and motors.
The S7-200 controller module includes: CPU module, I/O module, and D/A module, and the CPU module can complete the messy real-time control function ...
|
|
Basic Composition and Classification of Industrial Robots - OTC Odihi
Industrial robots are multi-articulation manipulators or multi-free robots in the industrial field. An important development of the future manufacturing industry is that industrial robots have now replaced the entire production, which is the foundation for the completion of intelligent production, and will ensure the completion of industrial automation, digitalization and intelligence in the future. Produce...
|
|
Types of OTC Welding Robot Wire Feeders
1. The wire feeder is divided into two types: integrated and separated according to the installation method. The wire feeder is installed on the rear of the upper arm of the robot and is integrated with the robot; The wire feeder is installed separately from the robot as a separate type.
Composed...
|
|
Contact
working hours
