In the field of industrial production, the device of industrial robots is very important, if the device presents a problem, it will not only affect the performance of robot equipment, but also lead to a decline in the service life of industrial robots, and will affect the safety of industrial production, and cause damage to the economic benefits of enterprises, so it is very important to do a good job in the installation of industrial robots.
1. Understand the procedure
Before the practice of the device, the relevant personnel should have a specific understanding of the operating procedures of industrial robots, and be clear about the relationship between the parts and components of industrial robot equipment, and the scale and orientation between the equipment should be exactly the same, and which can properly relax the specifications. In addition, it is necessary to conduct a detailed analysis of the device drawings, master the operating principle and functional structure of the industrial robot, and find the appropriate things and equipment before the device, so as to better provide guarantee for the role of the device.
2. Make a plan
It is necessary to formulate a specific plan for each industrial robot device in combination with the actual production status of the site, and also to draw up relevant emergency plans to ensure that all aspects are comprehensive and targeted. In addition, before the practice of the device, the relevant work instructions should also be drafted, and the specific operating procedures, operation points, personnel and self-inspection requirements should be clear in the work instructions, and then provide a consistent basis for the safety of industrial robot equipment. Multiple copies of the work instructions, such as the production company, the supervision part, the device commissioning part, the on-site device part, etc., should be kept separately, so that if there are related problems in the future, they can be held accountable and avoid the occurrence of problems that are tied to each other.
3. Cognitive fulfillment
It mainly refers to the need for a specific review of each industrial robot equipment installed, such as when the connection equipment of the industrial robot is installed, it is necessary to carry out a specific review of the critical scale of the parts that have been installed, so as to avoid the overall rework caused by the change of scale.
After all the industrial robot equipment is installed, a comprehensive self-inspection should be carried out, and the problems should be found in time before the later commissioning, and the targeted solutions should be made, and then the device inspection should be qualified at one time, and then the industrial robot equipment and equipment will be guaranteed to ensure that the industrial robot equipment and equipment can be completed within the regular construction period.
|
More on that
|
The type of electric motor in the robot drive system - Denso robots
The motors used in the drive system of industrial robots can be roughly subdivided into the following types:
1. Communication servo motors, including synchronous communication servo motors and reactive stepper motors.
2. DC servo motor ...
|
|
DENSO's new DENSO VS series of aseptic robots
DENSO Robotics announces the launch of its new compact, high-speed, VS-050 six-axis aseptic robot with ISO 5 cleanroom rating and specially designed coverings for applications requiring biofouling control.
DENSO P ...
|
|
Analysis of welding problems of DENSO welding robots
How to deal with the welding error of the welding robot?
After the above introduction, we need to temporarily understand the process parameters of the welding robot. In this section, we first learn how to deal with the welding shortcomings of welding robots.
Can welding robots show welding shortcomings? It can deal with ...
|
|
Offline programming of DENSO robots
For offline programming of Denso robots, RoboDK supports the following two programming languages:
In addition, RoboDK's Denso robot driver supports online programming of the RC7 and RC8 controllers. Other versions of the controller may be partially supported.
Robot-driven ...
|
|
DENSO has released a new entry-level large-scale parts assembly robot
At ATX West, the 2020 World Automation Skills Expo in Anaheim, United States, DENSO Investment Co., Ltd., headquartered in Japan, showcased a new series of high-performance industrial robots for entry-level manufacturers capable of manufacturing large parts.
...
|
|
DENSO robot architecture
Robot architecture refers to the structural method of information processing and manipulation logic of one or several robots in order to complete the specified target.
1. Differentiation according to function
According to the architecture of functional differentiation in artificial intelligence, it is attributed to traditional deliberative intelligence in artificial intelligence.
|
|
Causes of uneven electrostatic spraying of robots
The robotic electrostatic spraying equipment consists of a spray gun, a spray cup and an electrostatic spraying high-voltage power supply. When spraying, the spray gun, the spray cup and the paint particle parts are connected to the negative electrode, and the car is connected to the positive electrode and grounded, and an electrostatic field is formed between the end of the spray gun and the car. Coatings are mostly polymer organic conductive media ...
|
|
Features of Robotic Dresspacks:
1. High efficiency: The robot dresspack can carry out comprehensive and efficient inspection and protection operations inside the pipeline. It is able to traverse the entire pipeline system autonomously, reducing the need for human resources and increasing operating power.
2. Accuracy: Through the cooperation of sensors and control system, ...
|
|
DENSO Robotics showcases powerful large-scale assembly robots
The new VM-VL series can handle higher payloads and has a longer masking scale
Anaheim, California. – DENSO Robotics, a global provider of advanced robotics skills, held a meeting in A. 11-13 on February 11-13.
|
|
Collision detection system for industrial robots - DENSO robots
With the development of technology, robots are starting to take on more and more complex tasks. These operations sometimes require the operator to be able to intervene at any time, so in this case, the safety of human-computer interaction is a crucial issue. In order to ensure safety, the controller needs to detect the robot and the operator in real time.
|
|
Industrial robot simulation software - Denso Robot
(1) CAD import. RobotStudio makes it easy to import data in a variety of CAD formats, such as IGES, IGES, VRML, VDAFS, ACIS and CATIA. By using very accurate 3D model data, industrial robot programmers are able to generate more accurate programs.
|
|
Automated robots at the DENSO Expo steal the spotlight
The "2013 China Electronic Equipment Industry Expo" hosted by Shenzhen Electronic Equipment Industry Association was held in Shenzhen on August 7-9. A number of leading industrial enterprises displayed new materials, skills and intelligent equipment products, and a variety of high-precision and automated robot products were unveiled. Profilers point out that ...
|
|
Solving the welding defect method of welding robot - Denso robot
Through the above introduction, we must have a beginning understanding of the process parameters of welding robots. In this part, let's first understand how to deal with welding defects of welding robots.
Will welding robots have welding defects? Can it be handled? The welding industry catches the age ...
|
|
Features of the DENSO robot dresspack
1. High efficiency: The robot dresspack can carry out comprehensive and efficient inspection and protection operations inside the pipeline. It autonomously traverses the entire pipeline system, reducing the need for human resources and improving operational efficiency.
2. Precision: Through the cooperation of sensors and control systems, ...
|
|
Precautions for daily maintenance of manipulator - DENSO robot
As a traditional manufacturing enterprise, the use of manipulators to change the mode of production is the only way to reduce the dependence of enterprises on employment, reduce production costs, and achieve sustainable development. However, many enterprises lack daily maintenance awareness and professional knowledge after the introduction of manipulators, resulting in different manipulators.
|
|
Denso HSR high-speed 4-axis robot
DENSO Robotics announces the launch of its new HSR four-axis SCARA robot, which features advanced oscillation control, a newly planned, highly rigid lightweight arm and improved heat dissipation at the base to operate continuously at the highest additional speed. Achieve successive high-speed performance and repeatability ...
|
|
How to select the diameter of the welding wire of the DENSO robot
The main consideration in selecting the diameter of the wire is the thickness of the material to be welded. If the wire is selected that is too small for the data, the welding process is underpowered, and time and production costs are wasted, as the welder has to spend more time completing the weld. Because the weld may not be fully permeable ...
|
|
Advantages of custom robots – DENSO robots
1. Quality control:
When employees perform repetitive tasks, they are likely to make mistakes. However, with a custom-built machine, you can expect to receive the same output every time. Machines are able to perform the same mission again and again without faltering. This makes it possible to cut the overall ...
|
|
Robots are classified from application environment - DENSO robots
China's roboticists start from the use of the environment and divide robots into two categories, namely industrial robots and special robots. This is consistent with the international classification. Industrial robots refer to multi-joint manipulators or multi-degree-of-freedom robots for industrial applications. Special robots are in addition to...
|
|
Robotic Industrial Robot Maintenance – Denso
1) Cleaning robots
Regularly clean the base and arm of the manipulator; High-pressure cleaning equipment can be used, but direct eruption to the manipulator should be prevented; If the manipulator has grease film maintenance, remove it as required. (The use of strong solvents such as acetone should be prevented, the use of plastic maintenance should be prevented, and the use of plastic should be prevented.
|
|
Contact
working hours
