Generally speaking, stainless steel is the base material for most LVDT displacement sensors, as such raw materials have many advantages. Of course, there will be exceptions to the use of raw materials, for example, some products are not so demanding, in order to save costs, different raw materials may be used. What are the advantages of the sensor when using stainless steel raw materials?
One, more beautiful
The LVDT displacement sensor made of stainless steel looks more textured, and the brightness is very high, and the overall color is very bright, so it will be more beautiful. No matter what kind of thing is used, in fact, people will be very mindful of its appearance, although whether the appearance is beautiful or not may not affect the actual use, but it will affect the user's experience.
Second, it is stronger
In addition to being beautiful, the stainless steel LVDT displacement sensor is even more robust. In the process of use, there are often bumps, if the selected raw materials are more fragile, then the sensor is very simple to be damaged, so it is still necessary to choose a more robust material. When stainless steel raw materials are collided or fallen, they generally do not show any damage, and the service life is very long.
Third, corrosion and rust resistance
In the process of application, many metals generally show oxidation, rust, or decay. However, the LVDT displacement sensor made of stainless steel does not have to worry about these problems, because the selection of raw materials is excellent in terms of corrosion resistance and rust resistance, even if it is used in a relatively humid and perishable environment, it will not present any problems.
|
More on that
|
Common faults and solutions of linear displacement sensors
1. If the electronic ruler has been used for a long time, and the seal is now aged, and there are many impurities mixed with it, and the water mixture and oil will seriously affect the contact resistance of the brush, which will make the displayed numbers keep jumping. At this time, it can be said that the electronic ...
|
|
The role and classification of safety barriers
In electrical intrinsic safety explosion-proof, we generally divide the workplace into explosion-proof areas and non-explosion-proof areas. There is the transmission of electrical energy between the explosion-proof area and the non-explosion-proof area, for example, the switches, buttons, sensors, etc. in the explosion-proof area are connected to the PLC placed in the electrical cabinet in the non-explosion-proof area through wires.
|
|
Introduction to the modularity of the SLP safety barrier
In the process of modernization, the SLP series is gradually forming a modular safety system, constantly innovating, and requiring more stringent quality on the basis of innovation.
VISOLUX offers safety light curtains for a wide range of light beams. These self-monitoring lights ...
|
|
The R100 and R101 series of photoelectric sensors – we are blessed
With the launch of the new R100 and R101 series of photoelectric sensors, we have expanded our Sensing Skills 4.0 product line with innovative intelligence.
The R100 and R101 range include two light source plans: the robust PowerBea...
|
|
Engineered Vibration Sensor Test Methods – Blessing
In the field of engineering oscillation testing, there are various test methods and methods, but they can be divided into three categories according to the measurement methods of various parameters and the physical properties of the measurement process.
1. Mechanical quizzes
Will the works oscillate ...
|
|
Pressure sensor zeroing calibration matters - double blessing
1) It is recommended to place the pressure sensor and its tee valve at the level of the axillary line, which is used for ventilation and sensor zeroing.
2) Approve the maintenance cap on the three-way valve to be perforated, connect the sensor with the monitor, and follow the instructions of the monitor to ...
|
|
There are four classification forms of P+F encoders
1. Classification according to the engraving method of the code disc
(1) Incremental type: that is, a pulse signal is announced every time the viewpoint of the unit is turned (there is also a sine and cosine signal,
Then it is subdivided and choppered out of a higher frequency pulse), which is generally output for phase A, phase B, phase Z, phase A, ...
|
|
The selection of safety barriers
1) The operating voltage of the safety equipment connected to the safety barrier shall not exceed the maximum acceptable voltage of the safety barrier. Otherwise, it should be isolated from the system by using techniques such as optical resistance insulation, or using barrier safety barriers;
...
|
|
Wireless HART technology for industrial processes
WirelessHART uses the 2.4 GHz band (which is no-nonsense and globally) as a transmission medium for a variety of radio skills, including WLAN, Bluetooth, and ZigBee. However, WirelessHART is more than just a variant of WLAN.
...
|
|
Cable protection systems for harsh conditions
In addition to getting used to mechanical shock, pressure, and tensile strain, sensor cables are often exposed to chemical environments. While traditional sensor cable planning is often not sufficient to meet these requirements, the new cable maintenance system has been developed with this intention in mind, guaranteeing ...
|
|
Introduction to laser encoders
Encoder: Laser encoder is a general term for encoders with laser as the light source. According to the published material, the principle can be broadly divided into two types, namely the use of the grating method and the use of the Fourier image method. Grating thousand-related method, where a laser of wavelength is projected on a periodic grating at a distance of p, ...
|
|
The inner workings of a load cell – we are blessed
A load cell is a kind of sensor that converts physical quantities into electrical signal output, and is mainly used to measure the pressure or tension of an object.
Its internal structure mainly consists of the following parts:
1. Elastomeric Element: Usually made of metal ...
|
|
Analysis of the use of P+F encoders
1. Grating pollution This will reduce the signal output amplitude, and the oil must be quietly wiped off with absorbent cotton dipped in anhydrous alcohol.
2. Encoder connection cable failure: the probability of this fault is high, and it is often encountered in maintenance, so it should be a priority element. Generally, the encoder cable is broken ...
|
|
Precautions for the use of linear displacement sensors - double blessing
Whether it is a linear displacement sensor or a rope displacement sensor, it often encounters a variety of problems when it is used, including quality problems, application problems, environmental problems, etc., but the use of problems is common, and improper use is easy to damage the sensor.
...
|
|
The difference between a light sensor and a photoelectric sensor – we are blessed
Sensors we all know, at the same time the market demand is very large, there are many varieties, during which people are more commonly used light sensors and photoelectric sensors, although only a word difference, but the difference between the two is very large.
1. Different definitions:
...
|
|
Sensor calibration method – Blessing Blessing
Sensor calibration refers to the process of transmitting the standard value expressed by the norm to the indexing of the sensor's operating range, and the indexing is determined.
The calibration of the sensor is based on the standard value generated by a standard device (e.g. a known standard force, pressure, torque, displacement, etc.).
|
|
How to install the safety barrier
1. The safety barrier should be installed in a safe place, and the environmental conditions meet the requirements of "application conditions" in the "Safety Barrier Selection Sample".
2. The connecting wires of the intrinsically safe end (blue end) and non-intrinsically safe end circuits of the barrier safety barrier should be laid separately in the wiring slot.
|
|
Cable protection systems for harsh conditions
In many applications, there are certain safety requirements not only for the sensors in use, but also for the sensor cables. In order to ensure that the adapter components also meet these requirements, the new cable maintenance system provides the ambition for sensor adapters, cable conduits and cable glands ...
|
|
Encoder failure and selection matters - Bejiafu
An encoder is a device that compiles or converts signals or data into signals that can be communicated, transmitted, and stored. The encoder converts angular or linear displacement into an electrical signal.
Fault Symptom:
1. The encoder itself ...
|
|
Factors influencing the measurement accuracy of ultrasonic sensors - Doublebless
Sensors are used for a variety of measurements, but the difference in measurement accuracy has a great impact on the user, so what are the main factors that affect the measurement accuracy?
Measurement accuracy ...
|
|
Contact
working hours
