The R100 and R101 series of photoelectric sensors – we are blessed

1. The device mode of inclination sensor is divided into two types: horizontal device and vertical device, but whether it is a horizontal or vertical device, the sensor device surface should be parallel to the face of the measured object when installing, and the influence of dynamic and acceleration should be reduced at the same time. ...

Ultrasonic sensors are used for the inspection of printed circuit boards (PCBs), where ultrasonic sensors are used to inspect printed circuit boards. So what factors need to be taken into account when installing and assembling ultrasonic sensors? Ultrasonic ...

The model number of the sensor P+F NBB10-30GM60-WS 　　P+F NJ50-FP-E2-P1 　　P+F NBN8-18GM50-E2 　　P+F NJ50-FP-A2-P1 　　P+F KT10/33 　　P+F OBE10M-18GM60 ...

P+F proximity switches can be divided into three varieties: 1. Capacitive proximity switch can detect metal and non-metal objects with an induction scale of 1-40mm Capacitive proximity switches detect both metallic and non-metallic objects. ...

During the epidemic, Huoshenshan Hospital, which rose from the ground within 10 days, made foreign netizens exclaim miracles. This is a life-and-death contest against the epidemic, and it is also a speed that Chinese are proud of. Behind the "China speed", advanced construction equipment is indispensable, in which the project ...

Now that the prevention and control of the new pneumonia epidemic has entered a critical period, how can it be useful to reduce cross-infection in hospitals and prevent the spread of the epidemic? Reduce the operational pressure of front-line medical personnel and help prevent and control the epidemic? All of them have become the key policies that have attracted wide attention. From long-distance medical care to intelligent robots ...

Sensors and transmitters are thermal surface concepts. A sensor is a general term for a device or equipment that can be measured by rules and converted into a usable output signal according to a certain rule, which is generally composed of an active element and a conversion element. When the output of the sensor is a regular canonical signal, then ...

The proximity sensor, also known as the contactless proximity switch, is an ideal electronic switch sensor. When the metal detector approaches the sensing area of the switch, the switch can be contactless, pressureless, patternless, quickly issue electronic commands, accurately respond to the position and stroke of the action mechanism, and even ...

Under normal circumstances, a photoelectric sensor consists of two parts: a processing path and a processing element. Its basic principle is to use the photoelectric effect to convert the measured change into a change in the optical signal, and then use the optoelectronic components to further convert the non-electrical signal into an electrical signal. The "photoelectric effect" refers to the use of light ...

In electrical intrinsic safety explosion-proof (abbreviation: intrinsically safe explosion-proof), we generally divide the workplace into explosion-proof area and non-explosion-proof area. There is the transmission of electrical energy between the explosion-proof area and the non-explosion-proof area, for example, the switches, buttons, sensors, etc. in the explosion-proof area are connected to the non-explosion-proof area through the wires.

Sensors are used for a variety of measurements, but the difference in measurement accuracy has a great impact on the user, so what are the main factors that affect the measurement accuracy? Measurement accuracy ...

The use of robots that can exchange things requires high-speed movement and fast rotation. Conventional solutions for energy chains or slip rings lack the necessary flexibility with regard to this automation technology. Our wireless sensing system (WIS) enables non-contact in places where a fixed connection is not possible.

Load cells can be wired in two different input and output ways: One is the four-wire connection method The load cell of the four-wire connection method has no special requirements for the secondary instrument panel, and the time and time of use are very convenient, but when the cable is long, it is very simple to be affected by the working temperature.

(1) Electronic ruler When the electronic ruler is used to a certain moment, in the face of aging problems, we should pay attention to the fact that if the seal is now aged, and there are many impurities, water mixtures and oil, then it will affect the touch resistance of the brush, resulting in the continuous beating of the displayed numbers.

First, understand the digital output part. When purchasing an accelerometer sensor, you must understand the digital output, because this determines the interface between the system and the acceleration sensor, if the number does not correspond, it is inconvenient to use, so you must understand the data at the time of selection.

Instructions for setting up the ultrasonic function: The LED shows the setup process. The green light flashes and the target is found; The target did not notice a red ED flash; The connection setting is tucked into place and the T is set. Once the setup process is complete, the sensor works normally. ...

Picture sensor is an extremely useful product, which has gradually attracted the favor of shopping malls with its strong sensitivity and speed. The use of picture sensors in daily life is undoubtedly a digital camera product, and its development speed can be described as changing with each passing day. At...

The use of angle sensors in practical manipulation is relatively common, and may be useful for the needs of different occupations and different fields. No matter how good the instrument is, there is a quality of the instrument itself, and in order to reduce the presentation of errors in the measurement process, users need to choose a good quality ...

Torsion bar torque transducer is mainly composed of torsion bar tension spring, rotation-displacement converter, and potentiometer. The main function of the torsion bar tension spring is to detect the torque of the driver acting on the steering wheel and convert it into the corresponding corner value. The angle-displacement converter is a pair of spiral mechanisms that stretch the torsion bar.

1. The displacement sensor is a device that converts the motion displacement of the object into measurable electrical quantities. It is usually used to convert physical quantities such as displacement, orientation, deformation, oscillation, and size that are not convenient for quantitative detection and processing into electrical quantities that are easy to quantitatively detect and facilitate information transmission and processing. ...