In many applications, there are certain safety requirements not only for the sensors in use, but also for the sensor cables. In order to ensure that the adapter components also meet these requirements, the new cable maintenance system offers an ambitious product range of sensor adapters, cable ducts and cable glands. These components are very solid and are planned for all standard cylindrical sensors. Even in harsh environments, cable maintenance is always available, no matter what sensor you use.
A complete solution from a single source
In addition to getting used to mechanical shock, pressure, and tensile strain, sensor cables are often exposed to chemical environments. While traditional sensor cable planning is often not sufficient to meet these requirements, the new cable maintenance system has been developed with this in mind, guaranteeing robust maintenance in high-temperature environments or in applications that touch moving parts. As a complete solution from a single source, in addition to cable maintenance, we also supply the right sensors and junction boxes.
The sensor adapter provides a secure connection between the cylindrical sensor and the flexible tubing (hose) and can be easily screwed onto the cylindrical sensor. With a choice of M8, M12, M14, M18 and M30 sizes, we offer adapters for each of the standard cylindrical sensors in our product range.
As a critical component of the cable maintenance system, a flexible conduit (hose) seals the cable from the sensor to the junction box. Depending on your application, you can choose corrosion-resistant metal versions or IP67 coating versions to protect the cables from oil, grease and other substances.
Cable glands are used to connect the flexible conduit to the junction box, and are available in three thread sizes: M12, M16 and M30. The internal seal prevents liquids and dust from entering the inside of the junction box.
Versatile
The new cable maintenance system is primarily used in mechanical engineering as well as in the chemical and petrochemical industries. It is often part of a good solution, such as one developed in collaboration with a valve manufacturer to detect the four separate orientations of a control valve.
Choose from two or four inductive cylindrical sensors, as well as a new cable maintenance system and junction box, which includes all the matching cables. Even under the harshest conditions, this ambitious solution is suitable for all universal valves and provides reliable valve handling.
Advantages of a modern cable maintenance system
The matching product range for all standard sensors – threaded adapters for sensor units, conduits and cable seals
The perfect solution from a single source: cable maintenance with the right sensors and junction boxes
Robust solutions with high-quality materials that are protected from mechanical and chemical influences
Reliable IP67 sealing for maintenance of junction boxes
Versatility – even in applications with extreme temperature environments and touching moving parts
|
More on that
|
Anti-corrosion method of pressure sensors
Pressure sensors are used in all walks of life, especially in the industry, many pressure sensors, but the industry generally requires pressure sensors to be able to prevent corrosion, pressure sensor joints and cavities are imported stainless steel for all processing, as the pressure transmitter projectile body of stainless steel material resistance...
|
|
The structure of proximity sensor switches – we are blessed
1. Durability
The reason why the switch has such a long life is that the switch acts as elastic from the vertical direction of the elastic membrane. Although millions of peristalsis are carried out after the elastic membrane, because the creep rate is very small, only 0.1 - 0.3m ...
|
|
The difference between a temperature and humidity transmitter and a temperature and humidity sensor – we are blessed
Let's start with the conceptual difference, the sensor is a kind of detection equipment, can sense the measured information, and can sense the information, according to the law to change the information into electrical signals or other required information output, in order to satisfy the information transmission, processing, storage, display, recording and manipulation ...
|
|
The cause of drift in temperature and humidity sensors – Blessing
1. The temperature and humidity sensor will drift during use, which is impossible to avoid.
2. The fundamental reason for the drift is that all pressure sensors are based on the elastic deformation of a kind of material, no matter how outstanding the elasticity of the raw material is, after each elastic recovery, there will always be ...
|
|
The choice of accelerometers – Beggar
1. Analog output or digital output:
The first thing to pay attention to is the case of the analog and digital outputs, which is important because it is the interface between the system and the sensor. In general, the voltage of the analog output is proportional to the acceleration. For digital outputs, pulse-width modulated signals are typically used ...
|
|
The wiring method of the photoelectric switch
P+F photoelectric proximity switch is called a photoelectric switch made of the photoelectric effect. The light-emitting device and the photoelectric device are installed in the same detection head in a certain direction. When a reflective surface (the object to be detected) is close to each other, the photoelectric device receives the reflected light and outputs it in the signal, so that it can be "...
|
|
Important features of our sensors
On the linear scale of our sensors, the higher the sensitivity, the better. Because only when the sensitivity is high, the value of the output signal corresponding to the measured change is relatively large, which is conducive to signal processing. However, it should be noted that the sensitivity of the sensor is high, and the external noise that is not related to the measurement is also simple.
|
|
Classification of the movement mode of the displacement sensor
The displacement sensor has no sliding contacts, is not affected by non-metallic elements such as dust during operation, has low power consumption, and has a long service life, so it can be used in various bad conditions. Displacement sensors are mainly used to intelligently control the analog quantity of automation equipment production lines.
The displacement sensor selects laser three...
|
|
Introduction to laser encoders
Encoder: Laser encoder is a general term for encoders with laser as the light source. According to the published material, the principle can be broadly divided into two types, namely the use of the grating method and the use of the Fourier image method. Grating thousand-related method, where a laser of wavelength is projected on a periodic grating at a distance of p, ...
|
|
Precautions for the installation of linear displacement sensors – we are blessed
1. The linear displacement sensor should be used to prevent over-travel in the application, and a certain margin should be left in the selection to facilitate the use of the device.
2. The linear displacement sensor device is fixed by a bracket, and then the follow-up shaft is connected to the moving object to be measured. When the sensor is fixed in the device, it can be ...
|
|
Analysis of mechanical damage of encoder servo
Mechanical damage is common in servo response encoder problems, including hardware damage to the internal component structure of the encoder due to mechanical oscillation, collision, impact, wear and tear. Excessive mechanical oscillations may cause damage to the encoder disc, shaft and bearing.
|
|
Understanding sensor accuracy – a blessing
There are three goals of precision: precision, correctness, and precision.
precision
It sheds light on the sloppy nature of the measurement results. That is, for a certain stable goal (to be measured) by the same measurer ...
|
|
Eltra Incremental Rotary Encoder Types
Eltra incremental encoders fall into three categories:
Optical solid shaft incremental encoder Eltra. The couplings in these types are made of solid shafts.
· EL-ER 30 E/H；
· EH 38 A/B/D；
· EL-E ...
|
|
Tips and tricks for using sensors – a blessing
Tip 1 – Start with the bus stuff
As a first step, the engineer should use the method of first interfacing the sensor to constrain the ignorance through a bus thing. A bus thing connects to a personal computer (PC) and then to the sensor for I2C, SPI or other ...
|
|
The photoelectric switches are simply classified
An important function of the photoelectric switch is to be able to handle changes in the intensity of light: the light beam is changed by using optical components in the transmission medium; Use a beam of light to reflect objects; Instantaneously returns the light emitted by the beam over a long distance.
The photoelectric switch (photoelectric sensor) is a photoelectric proximity on...
|
|
How to make a load cell
1. Preparation of materials
The materials required for the manufacture of load cells include: thin-film resistors, elastomers, wires and adapters.
Thin film resistor sheet is a thin form of resistor, the internal resistance value of which will coup with the participation of external forces, elastomer is a more malleable ...
|
|
Precautions for installation during the use of encoders
First of all, the following points should be paid attention to when wiring the encoder:
1. It is necessary to use a metal cable bracket and ensure that the bracket connection is connected to the ground;
2. The cable should be arranged as close to the metal parts as possible, such as control cabinet panels, beams and metal rails, etc.
|
|
Wiring of weighing strain gauge tension and compression sensors – we are in control
Strain gauge tension and compression load cells are available in two different input and output wiring methods:
The first is the four-wire connection method.
The load cell of the four-wire connection method has no special requirements for the secondary instrument panel, and it is very convenient to use, but when the cable is long, it is easy to be shaken by the operating temperature.
|
|
An introduction to the properties of pressure sensors
1. Conceptual sensor: It can sense the specified signal under test and correlate the signal into an electrical signal.
Transmitter: Comply with the necessary algorithm rules to convert the measured electrical signal into a standardized industrial control signal.
(1) Sensitive element refers to the sensor that can directly (or as a response) ...
|
|
Pressure Transmitter Verification Regulations
A pressure transmitter is a type of instrument that converts a pressure variable into a consistent output signal that can be transmitted, and there is a given continuous function relationship between the output signal and the pressure variable, which is generally a linear function. Pressure variables include positive and negative pressure, differential pressure and pressure. Pressure transmitters are available in electric and ...
|
|
Contact
working hours
