The busway is one of the more critical components in the power system, and it is an important part of connecting cables to important equipment such as substations, overhead lines, transformers, circuit breakers, etc. It is widely used in various power systems, mainly for the reliable operation of power systems.
structure
The bus duct is a commonly used connector in the power system, it is also known as the bus bracket, which is mainly composed of the bus bracket itself, the support bolts on the bracket, the connecting bolts on the bracket, the support bracket on the bracket, the support pad on the bracket, the support piece on the bracket, the bolt on the bracket and the protective pad on the bracket. The bus bracket is mainly used to connect the bus to important equipment such as substations, overhead lines, transformers, circuit breakers, etc., so as to realize the reliable operation of the power system.
raw material
The raw materials of bus duct are mainly stainless steel, plastic, aluminum alloy, cast iron, etc. Stainless steel bus duct has the advantages of high corrosion resistance, high strength, compact structure, light weight, low pollution to the environment, simple device, good protection performance, etc., so it is widely used in power systems. Plastic busway is also widely used in power system due to its excellent wear resistance, heat resistance, moisture resistance, durability, high tensile strength, light weight, and ease of installation.
apply
Busway is widely used in the power system, which can effectively connect the bus to substations, overhead lines, transformers, circuit breakers and other important equipment, so as to achieve the reliable operation of the power system. In addition, busway can be used for installation cables in order to connect cables to substations, overhead lines, transformers, circuit breakers and other important equipment.
device
The device of the bus duct is generally divided into two processes: first, the bus bracket should be installed, and the device orientation of the bracket should be consistent with the wiring direction of the bus bar; It is not necessary to install the busbar, and when installing the bus, it is necessary to pay attention to the device of the bus bar and the device of the bracket to ensure that the bus bar can be firmly fixed on the bracket.
Precautions
When using the bus duct, it should be noted that: pay attention to the device orientation of the bus duct, and ensure that the device orientation of the bus duct is consistent with the wiring orientation of the bus; It is necessary to pay attention to the bolt device of the bus duct, and ensure that the bolt device of the bus duct is strong to ensure the strong connection of the bus bar; It is necessary to pay attention to the inspection of the bus duct, and regularly check the device status of the bus duct to ensure the normal operation of the bus duct.
In short, the bus duct is an important connector in the power system, which can connect the bus to the substation, overhead lines, transformers, circuit breakers and other important equipment, so as to achieve the reliable operation of the power system. Therefore, when using the bus duct, we should pay attention to the device orientation of the bus duct, the device of the bolt and the view of the bus duct.
|
More on that
|
Uses and characteristics of detached closed busbar - Wiener
Closing busbars include out-of-phase shut-off buss, co-box (including co-box phase isolation) shut-off busbars and cable busbars, which are used for power plants, substations, industrial and civil power supply leads.
Phase-off busbar
1. Usefulness
Out of phase ...
|
|
Bus load forecasting method and characteristics - Wiener
Bus load guessing is a kind of power system load guessing, and the bus system load can be defined as the sum of the terminal load supplied by the main transformer of the substation to a relatively small power supply area, which is the refinement of the system load. Bus load guessing generally only carries out short-term load guessing, and the result is ...
|
|
The advantage of intelligent energy-saving dense busway - Wiener
Intelligent, energy-saving, dense busway, it is capable of generating outward electromagnetic wave radiation. It can be said that the line loss in the process of power transmission is greatly reduced, which can save energy and reduce electromagnetic radiation pollution. In addition, the product is also specially equipped with a radiator, which increases the heat dissipation area of the conductive bar and accelerates the ...
|
|
The main components of the Wiener bus system in the distribution cabinet are composed
The Wiener bus system is divided into 40mm, 60mm, 100mm and 185mm systems according to the upper and lower spacing between the copper bars, and the ship unloader distribution cabinet mainly adopts a 60mm rectangular bus system. This is shown in the figure below. The 60mm system provides maximum operating space and maximum current with its smallest external size.
|
|
Busway Installation Specification – Wiener
1: The basic requirements for the bus duct:
1) Conductor data: high-purity electrical copper drawn from national standard T2 electrolytic copper, with a purity of more than 99.9% and a full-length tinned copper conductor. 2) Shell: Select high-quality aluminum-magnesium alloy profiles that meet the strength, with heat dissipation ribs, and the appearance should be oxygen-proof.
|
|
Wiener busbar system PT disconnection treatment
The judgment of PT three-phase voltage loss (symmetrical disconnection) is fundamentally the same for each manufacturer, and it is judged according to the three-phase no voltage and the current of the line. The same is true for PT asymmetrical wire breakage. After analyzing the characteristics of PT wire breaking, the specific judgment of PT asymmetric wire breaking of different manufacturers ...
|
|
Precautions for terminal block wiring - Wiener
1. The fastening wiring force should be moderate, avoid sliding the bolts and nuts with excessive force, and replace the bolts and nuts that have been slid in time, and prohibit the operation.
2. When tightening or loosening the screws with a screwdriver, it is necessary to force the screws to ...
|
|
Types of busbars, conditions for the scope of application - Wiener
1. Commonly used busbars, useful categories
Busbars are divided into hard busbars and soft busbars.
According to its different shapes, hard buses can be divided into: rectangular busbars, tubular busbars, trough busbars, diamond busbars and so on.
Rectangular busbars are the most commonly used busbars and are also busbars. According to its material ...
|
|
Fast protection of medium and low voltage busbars – Wienal
1.It is necessary to install arc light maintenance
Arc maintenance in foreign countries has nearly 20 years of history, the first set of maintenance devices in 1995 has been put into operation, China's previous imported units in the introduction of foreign complete sets of arc light maintenance (such as Guohua Tianjin Panshan Power Plant), domestic units ...
|
|
Technical requirements for busway system – Wiener busbar
1. The conductor of the bus bar is a high conductivity TMY electrical hard copper bar rolled by T2 electrolytic copper, and the purity of copper must be ≥ 99.95%, and copper-aluminum alloy or other mixed alloy non-pure copper conductor materials shall not be used, and the copper plate is tin plated on the full length.
2. The raw material of the neutral wire and the phase wire in the bus system is the same.
|
|
NH-Fuse Type Disconnector Instructions for Use
When switching on and off components, you should pay attention to the following:
–In accordance with VDE-0105-100, only operation by electrical professionals or persons with electrical knowledge is allowed (operation without electricity, closing, disconnecting, and replacing fuses ...).
|
|
Distribution cabinet bus calculation method - Vilna
1. The main bus at the upper end of the low-voltage distribution cabinet is calculated according to the material and cross-section in the extension meter. The bus bar connected to the main bus at the upper end of the switch is not accounted for and is included in the low-voltage distribution cabinet.
2. The transformer mainly depends on how large the load is, according to your switchgear can be calculated to match the transformer, but not the same...
|
|
What are the specific accessories of the busway - Wiener
1. Connecting copper plates, insulating plates, and insulating piercing screws generally refer to tension spring brackets, bus connectors, connecting copper bars, and plug-in boxes. The bracket is used for buffer busbars to squeeze each other during connection, and the adapter is used for connection. The connecting copper bar is the local use of the box and the bus connection of the cabinet connection.
...
|
|
Uses and technologies of cable junction boxes – Wienal
XBT series mine flameproof communication cable distribution box has the characteristics of small size, reasonable cable import and export, and wide coverage. Each distribution box has 4-10 inlet and outlet bells, which is suitable for HUYV type mine signal cable in coal containing sexual gas (methane) mixture (non-mining face).
|
|
Wiener's built-in current transformer
Thanks to the precisely developed housing size, current transformers can now be integrated into all major products in a very space-saving way, such as:
QUADRON®185Power Speed disconnector fuse set
QUADRON®185Power Fuse Isolation ...
|
|
The role of plug-in busway – Wiener
Generally speaking, plug-in busway is mainly used for power transmission. We know that all conductors will have losses, and the losses caused by the flow of electricity through conductors are larger and some are smaller. For example, compared with the aluminum wire with the same wire diameter and the copper wire, the loss of aluminum is larger, and the loss of copper is smaller. That is, the conductivity ...
|
|
Use and characteristics of AC busbar systems – Wiener
The communication and connection skills of the independent power supply system create better prospects for the power supply of the future. Hundreds of systems around the world have installed SMA's Sunny Island battery inverters to supply power to customers for a long time. The stackability of Sunny Island, i.e. multiple Sunny Islands ...
|
|
Wiener bus load forecasting method
Bus load guessing is a kind of power system load guessing, and the bus system load can be defined as the sum of the terminal load of a relatively small power supply area supplied by the main transformer of the substation, which is the refinement of the system load. Bus load guessing generally only carries out short-term load guessing, and the result is ...
|
|
Connector box features of the busbar system – Wiener
1. Rapid device
Today, busway adapters cannot be flipped at the time of installation, and the two busway sections are not out of phase when flipped when connected.
2. High protection level
The coupling box has a protective function, ...
|
|
The Wiener bus system is reliable
The bus refers to the connection of voltage distribution devices at all levels in the substation, as well as the connection of electrical equipment such as transformers and corresponding distribution devices. The role of the busbar is to gather, distribute and transmit electrical energy.
...
|
|
Contact
working hours
