Servo drive is a kind of controller used to control servo motor, its function is similar to that of an inverter acting on an ordinary AC motor, which is a part of the servo system and is mainly used in high-precision positioning systems.
Servo drive is an important part of modern motion control, which is widely used in industrial robots and CNC machining centers and other automation equipment. Generally, there are three control modes for servo: position control mode, torque control mode, and speed control mode.
1. Position control
The position control mode is generally to determine the size of the rotation speed through the frequency of the external input pulse, to determine the rotation angle through the number of pulses, and some servos can directly assign the speed and displacement through communication, because the position mode can have a very strict control over the speed and position, so it is generally used in the positioning device.
2. Torque control
The torque control mode is to set the output torque of the motor shaft by the input of the external analog quantity or the assignment of the direct address, and the set torque can be changed by changing the setting of the analog quantity in real time, and the value of the corresponding address can also be changed by means of communication.
The application is mainly in the winding and unwinding devices that have strict requirements for the material, such as winding devices or optical fiber pulling equipment, and the setting of torque should be changed at any time according to the change of the winding radius to ensure that the force of the material will not change with the change of the winding radius.
3. Speed mode
The rotation speed can be controlled by the analog input or the frequency of the pulse, and the speed mode can also be positioned when the outer loop PID control with the upper control device is controlled, but the position signal of the motor or the position signal of the direct load must be fed back to the upper position for calculation. The position mode also supports the direct load outer ring to detect the position signal, the encoder at the motor shaft end only detects the motor speed, and the position signal is provided by the detection device at the direct final load end, which has the advantage that the error in the intermediate transmission process can be reduced, and the positioning accuracy of the whole system is increased.
If there is no requirement for the speed and position of the motor, as long as a constant torque is output, of course, the torque mode is used.
If you have certain accuracy requirements for position and speed, and you are not very concerned about real-time torque, it is not convenient to use torque mode, and it is better to use speed or position mode.
If the upper controller has a better closed-loop control function, the effect of speed control will be better, if the requirements are not very high, or there is basically no real-time requirements, the position control mode is adopted.
|
More on that
|
Estun servo motor - introduction of three control methods of servo motor
1. Position mode
Look at this name, you can guess a rough idea, to put it bluntly, the position requirements are relatively high, such as the linear servo module this kind of mechanism, the need for the sliding mechanism to stop accurately, just use this mode, speaking of which, let's take a look at the ball screw module ...
|
|
FAQs about Estun servo motor(11)
11. What is the principle of parameter adjustment of speed loop and position loop of servo drive?
In addition to the performance of the motor and the drive, the adjustment of the drive parameters is also a very critical factor.
The main performance parameters of the servo drive ...
|
|
Estun Robot - Problems and Solutions of Palletizing Robots
1. Problems in the application of industrial robot palletizing
Palletizing gripper problems
The ability of the palletizing robot to work under different operational tasks mainly depends on the design of the robot flange crane. The quality and performance of the robot crane directly affects the work of the industrial handling robot ...
|
|
How to disassemble the five or six axes of Estun robot?
1. Open the shell of the robot to expose the motor base.
2. Use a screwdriver or wrench to remove the screws on the motor base.
3. Remove the screws, lift the motor base, and disassemble it from the robot.
4. The motor base is tightly connected with the robot, and tools such as wrenches are used.
|
|
Estun servo drive alarm code analysis
Estun Server Alarm A.01 Parameter Broken
Estun server alarm A.02 A/D is damaged
Estun Server Alarm A.03 Overspeeding
Estun server alarm A.04 Overload
Estun Server Alarm A.05 Position Deviation Counter Overflow
Ace...
|
|
Estun Robot - Characteristics and Classification Application of Palletizing Robot
Palletizing robot is the product of the organic combination of machinery and computer program, which provides higher production efficiency for modern production, and the palletizing machine has a wide range of applications in the palletizing industry. The palletizing robot greatly saves labor and space. The palletizing robot operates flexibly, accurately, and quickly.
|
|
Estun Robot - Precautions for the use of welding robots
One: personal protection
The safety operation procedures of welding robots are first of all to do a good job of personal protection, and the maximum scale of welding robot operations is set up outside the protective fence or cordon, and personnel are not allowed to enter the scale of their operations in the welding robot operation.
In the process of welding robot operation, it is necessary to ...
|
|
Estun servo motor - comparison of PLC servo and motion control, AC and DC servo technology
Servo system has an important position in electromechanical equipment, and high-performance servo system can provide flexible, convenient, accurate and fast drive. With the advancement of technology and the continuous development of the entire industry, the development trend of the traction system is to replace the traditional hydraulic, DC ...
|
|
Estun Robot - Common faults and troubleshooting methods of palletizing robots
1. The clamping action of the palletizer is too slow or the clamping stroke of the nail is insufficient.
Causes and solutions: bolts are loose, and the front buckle or inner piece of the board machine is worn. The bolt can be tightened, paying attention to the correct position of the front buckle shaft. You can replace the front buckle or the inner piece of the board machine, after completing the above actions, test its function, if the line ...
|
|
Estun Servo Motors – Encoder FAQs
1. Q: What are the precautions for the selection of incremental rotary encoders?
There are three parameters that should be noted:
1. Mechanical installation dimensions, including positioning stops, shaft diameters, and mounting holes; cable outlet mode; installation space volume; Whether the protection level of the working environment meets the requirements.
...
|
|
Estun Robotics – What is the difference between robot lubricant and grease?
1. Lubricating oil is used in various types of machinery, the role is to reduce friction, so as to protect the liquid lubricant of machinery and processed parts, mainly playing the role of lubrication, cooling, rust prevention, cleaning, sealing and buffering.
2. Grease is a relatively viscous grease-like semi-solid. It is used in mechanical ...
|
|
Estun servo motor - the structural composition of the servo control system
A servo control system is a feedback control system that is used to accurately follow or reproduce a process. In many cases, the servo system refers specifically to the feedback control system in which the controlled quantity (the output of the system) is the mechanical displacement or displacement velocity and acceleration, and its function is to make the mechanical displacement of the output (or ...
|
|
Estun servo motor - speed regulation and shutdown of DC motor
Speed regulation of DC motors
Constant power weak magnetic upward speed regulation, the magnetic field governor can be adjusted until the speed reaches the required value, but shall not exceed the maximum speed allowed by the technical conditions. Constant torque loads can be slowed down by step-down or armature string resistors.
Downtime of the DC motor
...
|
|
Maintenance steps for Estun palletizing robots
One: machine cleaning
First and foremost, disconnect the power supply and remove debris around the machine. Use a clean cloth to wipe the surface of the machine to ensure that it is free of dust, grease and other impurities. For the cleaning of the inside of the machine, it needs to be operated by professionals.
Two: Look at the machine parts
...
|
|
Estun servo motors – the difference between incremental encoders and absolute encoders
1. The working principle of incremental encoder:
The incremental encoder converts the displacement into a periodic electrical signal, and then converts the electrical signal into a counting pulse, and the number of pulses indicates the size of the displacement.
To describe the pouring water, the incremental encoder is like, looking for a non...
|
|
Estun servo motor - daily inspection and maintenance of three-phase asynchronous motor
The daily inspection is mainly to monitor the start-up and operation of the motor, find abnormal phenomena in time, and prevent accidents. Generally, it is carried out by looking, hearing, touching, smelling, asking and monitoring the ammeter and voltmeter.
(1) Observe whether the motor has abnormal noise and vibration. Especially...
|
|
Estun servo motor - 8 common faults and solutions of servo motors
1. How to deal with the servo motor not running when there is pulse output?
a. Monitor the current value of the pulse output of the controller and whether the pulse output light is flashing, and confirm that the command pulse has been executed and the pulse has been output normally;
b. Check the control cable from the controller to the driver, ...
|
|
Estun servo motor - introduction to the control mode of AC servo motor
1. Amplitude and phase control mode
The amplitude and phase are controlled, and the speed of the servo motor is controlled by changing the amplitude of the control voltage and the phase difference between the control voltage and the excitation voltage. That is, the amplitude and phase of the control voltage UC are changed at the same time.
2. Phase control mode
Phase-controlled ...
|
|
Estun servo motor - from which aspects to check the servo motor overheating
(1) The motor heat dissipation system is faulty
The temperature of the motor rises due to the heat generated by the motor not being dissipated quickly. At this time, the main solution is to check whether the cooling fan of the motor is operating normally and whether the direction of rotation of the fan is correct. The surface of the motor is ...
|
|
Estun servo motor - the use of servo motor steps
As the engine that controls the operation of the servo system, the servo motor is a kind of indirect transmission device of the auxiliary motor, so how to use it correctly is a very critical task.
The following motion controller uses analog signal control servo motor as an example to illustrate.
1. Initialize Parameters ...
|
|
Contact
working hours
