Due to the limitations of technology and environmental adaptability, the surface touch screen will not be able to be used normally due to water droplets, dust and other pollution not being treated in time, so the touch screen also needs regular maintenance like ordinary machines. And because the touch screen is a touch all-in-one machine with a high degree of integration of a variety of electrical equipment, the following problems should be paid attention to when using and maintaining.
1. Wipe the screen with a dry cloth every day before turning it on.
2. If a water droplet or drink falls on the screen, it will stop the software from reacting, which is due to the similar characteristics of the water droplet and the finger, and the water droplet needs to be wiped off.
3. The touch screen controller can automatically judge the dust, but too much dust will reduce the sensitivity of the touch screen, just wipe the screen clean with a dry cloth.
4. Use glass cleaner to clean dirty fingerprints and oil stains on the touch screen.
5. Turn on and off the power in strict accordance with the regulations, that is, the order of turning on the power is: display, audio, and host. Power off is done in reverse order.
6. A large number of temporary files are generated on the hard disk, and if you often break points or shut down directly without exiting Windows, it will soon lead to hard disk errors. Therefore, it is necessary to run ScanDisk regularly to scan the hard disk for errors, and it is best to set a secret way in the application to exit the application and Windows to power off again, for example: click on the four corners in the prescribed order.
7. Pure touch screen programs do not require a mouse cursor, and the cursor will only make the user distracted.
8. The simplest anti-mouse mode should be selected for the application to use, because complex modes require sacrificing latency and system resources.
9. In Windows, when launching a slower application, the user has the opportunity to enter other systems. The solution is to modify the SYSTEM.INI file: change the shell=progman.exe (under Windows 3.x) or shell=Explorer.exe (on Windows 95) to .exe file. But the application should be able to exit Windows directly, otherwise the system can't quit.
10. Depending on the harsh environment, open the machine head regularly to clean the reflective stripes and inner surface of the touch screen. The specific method is to open the cover plate on both sides of the machine, and you can find the mechanism that loosens the deadbolt fastening the front of the head, and the deadbolt can be released by opening the mechanism. Lift the front of the nose, you can see the touch screen control card, unplug the touch screen cable, and step back to remove the head and touch screen. After carefully looking at the method of fixing the touch screen, remove the touch screen for cleaning, being careful not to use hard paper or hard cloth, and not to scratch the reflection streaks. Finally, the nose is restored in reverse order and in the original structure.
|
More on that
|
Buke servo motor - the output signal of the servo motor encoder
1. OC output: It is commonly said that the triode output, and the input impedance and circuit circuit need to be considered for connection.
2. Voltage output: In fact, it is also a format of OC output, but it has a built-in active circuit.
3. Push-pull output: the interface is easy to connect, no need to consider NPN and PN ...
|
|
Buke servo motor - servo motor encoder fault and maintenance
(1) Encoder failure: It refers to the failure of the components of the encoder itself, resulting in its inability to generate and output correct waveforms. In this case, the encoder needs to be replaced or its internal components repaired.
(2) Encoder connection cable failure: the probability of this fault is the highest, and the maintenance ...
|
|
Introduction and functions of Buke touch screen programming software
Buke touch screen programming software is a professional touch screen programming software, support for MT505T, MT506MV, MT508T, MT510T and other models, can assist users in the extreme time to grasp its planning methods, very suitable for modern industry increasingly large workload and function ...
|
|
A picture to understand the Internet of Things and interactive functions of the HMI touch screen
In the past industrial field, HMI touch screens were used more as a window for people to interact with mechanical equipment, and were used to connect various PLCs and sensors. Nowadays, in the context of the Industrial Internet of Things, manufacturing enterprises need to integrate OT and IT technologies more to achieve their own digital and intelligent transformation.
|
|
Buke servo motor - what is the cause of servo motor jitter?
Point 1
When the servo motor jitters at zero speed, the gain should be set high, which can reduce the gain value. If the alarm stops when starting, the most likely is that the phase sequence of the motor is incorrect.
Point 2
1. When the PID gain adjustment is too large, it is easy to induce...
|
|
What should I do if the Buke servo drive alarm 0006?
Drive Alarm 0006 Please troubleshoot in the following order:
1. Is the motor model correctly configured?
2. Is the motor encoder cable firmly connected?
3. If the above two points are correct, please replace the motor or driver for cross-comparison and troubleshooting.
As mentioned above ...
|
|
Buke servo motor - what are the daily maintenance tasks of servo motor?
The servo motor can control the speed, the position accuracy is very accurate, and the voltage signal can be converted into torque and speed to drive the control object. The rotor speed of the servo motor is controlled by the input signal, and can respond quickly, in the automatic control system, used as an actuator, and has an electromechanical time constant...
|
|
Buke set off a new frenzy of "M-IoT machine Internet of Things".
On December 10th, the "2020 Buke - IoT Machine Internet of Things Solution Seminar" was held in Wenzhou Ruian, with more than 60 company leaders including Tang Dong, chairman of Buke Co., Ltd., Wang Gang, sales executive, and Ouyang Yunsheng, director of HMI products, attended by more than 60 company leaders, as well as new/old agents and terminals from Wenzhou.
|
|
The causes and solutions of the shutdown of the Buke motor due to pollution
Reasons for the shutdown of the speed up Buke motor due to contamination:
1. Bearing lubrication failure or bearing surface damage
Contaminants can disrupt bearing lubrication and damage bearing surfaces. This will cause the friction to generate heat. If the problem cannot be solved, the increased heat may cause the bearing and the ...
|
|
Buke servo motor - the fault and maintenance method of servo motor encoder
A servo motor encoder failure means that the encoder component is faulty, preventing it from generating and outputting the correct waveform. In this case, the method of repair is to replace the encoder or repair its internal parts.
1. Encoder connection line failure: this kind of failure has the highest probability of repair...
|
|
Buke servo motor - the working principle of servo motor
1. The servo mechanism is an automatic control system that enables the position, orientation, state and other output controlled quantities of the object to follow the arbitrary change of the input target (or given value). The servo mainly relies on the pulse to position, which can basically be understood in this way, the servo motor receives 1 ...
|
|
Buke human-machine interface - the basic functions and selection indicators of human-machine interface products
1) The working status of the equipment is displayed;
2) Data and text input operation, printout;
3) Production formula storage, equipment production data recording;
4) simple logical and numerical operations;
5) It can be connected to a variety of industrial control equipment networking.
...
|
|
Buke motor - installation method of frameless motor
1. Install the rotating shaft on the equipment casing, and the spindle and the equipment casing are supported by bearings.
2. Install the stator on the stop of the equipment housing and press it with the stator pressure ring.
3. Put the rotor into the inner hole of the stator, pay attention to protect the stator at the same time, and use the connecting bolt to connect the rotor with the ...
|
|
Buke servo motor - the structural composition of the servo system
1. Comparison link
The comparison link is to compare the input command signal with the feedback signal of the system to obtain the deviation signal between the output and the input, which is usually implemented by a special circuit or computer.
2. a controller
The controller is usually a computer or PI...
|
|
The reason for the maintenance failure of the Buke servo motor that is shut down due to pollution
1. Bearing lubrication failure or bearing surface damage
Contaminants can disrupt bearing lubrication and damage bearing surfaces. This will cause the friction to generate heat. If the problem cannot be solved, the increased heat may cause a catastrophic failure of the bearing and the Buke motor to stop running.
2、 ...
|
|
Buke servo motor - common faults and solutions of servo motor encoders
1. Encoder connection line failure: This kind of failure has the highest probability and is often encountered in maintenance, so it should be a priority factor. Often, encoder cables are open, short, or in poor contact, so the cable or connector needs to be replaced. Special attention should also be paid to whether the cable is loose and causes open soldering or ...
|
|
Buke servo motor - what are the speed regulation methods of servo motor?
1. If the servo motor is an AC motor, it is a DC inverter air conditioner for speed regulation; If the servo motor is a DC brushless DC motor, it is the DC power supply DC transformer speed regulation; All servo motors can be used as "PLC motor speed regulating power supply circuit servo motor".
2、 ...
|
|
Buke human-machine interface - the basic function of human-machine interface products
1) The working status of the equipment is displayed;
2) Data and text input operation, printout;
3) Production formula storage, equipment production data recording;
4) simple logical and numerical operations;
5) It can be connected to a variety of industrial control equipment networking.
...
|
|
Buke servo motor - the difference between various motors
The ordinary motors, stepper motors, servo motors, and servos mentioned here refer to DC micro motors, and most of the DC motors we usually come into contact with. An electric motor, also known as a "motor", refers to an electromagnetic induction device that maintains the transformation or transmission of electromagnetic energy according to the laws of electromagnetic induction. Motor...
|
|
Buke touch screen recommended model - MT4000 series
1. Product introduction
USING 32-BIT RISC CPU AND A STREAMLINED LINUX KERNEL, THE MT4000 SERIES OF HUMAN-MACHINE INTERFACE PRODUCTS CAN DISPLAY A VARIETY OF TRUE-COLOR GRAPHICS FORMATS, AND ITS OUTSTANDING PROCESSING SPEED AND RICH SOFTWARE FUNCTIONS CAN MEET THE NEEDS OF MOST USERS. Support with the vast majority of PLCs directly ...
|
|
Contact
working hours
