Areas where KUKA robots can be used

Planning reasons and countermeasures 1. Japan RV reducer internal gear accuracy level planning Japan RV reducer planners often consider economic factors as much as possible to confirm the gear accuracy level negligence accuracy level is the gear noise and backlash mark. United States Gear Manufacturers Association ...

In the domestic welding robot equipment career development speed is fast, from the past individual enterprise use, to the current most of the professional production welding is inseparable from KUKA robot equipment, the application field is more and more extensive. The most important thing in welding work is to ensure the quality of welding, welding quality ...

The Cooka teach pendant is an interface between the supervisor application software and the user (robot). The teaching program is connected to the control cabinet by cable. When the robot performs actions such as jog feeder, program creation, program test execution, action execution, and attitude confirmation, we make ...

The vision system of mobile robot refers to the vision system of mobile robot, which includes two parts: obtaining pictures through sensors and processing drawings through computer processors. According to the number and characteristics of vision sensors, the mobile robot vision system of the main stream has monocular vision, binocular ...

1. When Midea proposed to Kuka to buy the offer, it was indeed blocked by many people. There are opposing voices from Germany's business and political circles, and these people are worried that KUKA's central technology will be grasped by China's manufacturers, which will have a great impact on high-end players in related fields in China and even in the world.

1. Connect the oil pump to the discharge hose. 2. Increasing the required amount of oil through the discharge hose. 3. Clean the magnetic plug, check the seal, and replace the damaged magnetic plug. 4. Install the magnetic and tighten it; M ...

1. It is necessary to conduct teaching assignments Before the robot performs active welding, it is necessary for the operator to teach the robot the track of the welding gun and set the welding conditions. Because it is necessary to teach, the robot does not weld to a wide range of products produced in a small number of products. 2. There must be ...

Industrial robots are the star products of industrial automation, and the 30 billion ontology space is expected to leverage trillions of automation to transform shopping malls. The body space is about 30 billion yuan: the essence of automation is the automation of the process, and the ultimate policy is to improve the total factor yield. Multi-axis industrial robot is an automated ...

KUKA's KR 3 AGILUS conquers Brazil's Bionicook to serve snacks, drinks and desserts in the world's first fully active fast food vending machine. Industrial enterprises have long begun to adopt the ...

1. Maintain good parts Parts are an important part of the CNC machine tool robot, the reason why the parts of the CNC machine tool manipulator in the process of use show severe wear, the first reason is that there are problems with people's devices, so that the position of the parts is problematic.

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are intact and functional, that they can operate safely and that faults can be identified. It is necessary for us to comply with the labor protection regulations of the country and region to check, and it is also necessary to test all safety ...

KUKA Robot RSI: KUKA. Robot Sensor Interface Function: The data and signals from external sensors are effectively combined with the robot control system, and then the robot movement is corrected and guided. ...

KUKA's Edition robot assists new customers in price-sensitive shopping malls in the useful automation of welding tasks. Focus on the main points, have a higher cost-to-benefit ratio, and can obtain the skill set at that time. Initially, the KR CYBERTECH nano ARC was available in two variants of the Editi ...

1) The strengths and weaknesses of DC servo motors Advantages: speed control, torque and speed characteristics are very hard, the control principle is simple, easy to use, and cheap. Defects: Brush commutation, speed limit, additional resistance, occurrence of wear particles (not suitable for dust-free and explosive environments) ...

1. The KUKA robotic arm body is composed of 1) base 2) turntable 3) balance cylinder 4) big arm 5) small arm 6) central shaft. In the meantime, not every robot has a balance cylinder, and robots with larger loads will be equipped with a balance tank. ...

1. Place the nut Clamp the quad or hex nut and place it in the fixture 2. Thread sizing Grab the screw and assist it to complete the "180-degree turn" action; Apply an appropriate amount of sealant to the thread on its underside ...

Step 1: Teach function Convert the operation method to "T1" and move the robot to its origin position. Select the program "Cor_T1". Then open the folder (menu "Program" --> "FOLD" --> "AllFOLDs opn"), otherwise the corresponding entry will not be displayed ...

There is no program display when the KUKA robot is restarted, that is, the gun cleaning program has been deleted, maybe the name of the program has been changed. Of course, KUKA robots have programs, KUKA robot bodies, handheld teaching programmers and control cabinets, there are all kinds of circuit boards, circuit boards are required to program ...

The boundary of robot operation is to move parts and things in space through a certain organization, and the needs naturally represent the position and posture of the parts, things, and the organization itself. In order to delimit and apply the mathematical quantities that represent potentials, it is necessary to delimit the coordinate system and give the rules of representation. ...

Introduction to Logic Programming Use input and output in logic programming In order to communicate with the peripherals of the robot control system, digital and analog inputs and outputs can be used. To KUKA ...