Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Product parameters
The switching functions are complementary
Output type NPN
Rated working distance 15mm
The installation is not flush
Output polarity DC
Guaranteed working distance 0...... 10.8 mm
Actual working distance: 13.5...... 16.5 mm
Rating:
Installation conditions
B 15 mm
C 30 mm
F 45mm/60mm
Operating voltage: 10...... 30 volts DC
Switching frequency: 0...... 100 Hz
Lag 1...... 10 typical values. 5%
Reverse Polarity ProtectionReverse Polarity Protection
Short-circuit protection pulses
Imax≤500 mA
Voltage drop ≤ 2V
The repeatability ≤ 1.5mm
Operating current: 0...... 100 mAh
Off state current: 0...... 50 μA typical. 5 microamps
The no-load supply current ≤ 15 mA
Switch status indicator LED, yellow
Functional safety parameters:
MTTFd 941 amps
Mission time (TM) 20 a
Diagnostic Coverage (DC) 0%
Indicator/Operation Keys:
Potentiometer sensitivity adjustment
Licensing & Certification:
UL listed cULus list, generic
CCC certified products with a voltage rating of ≤36 V do not require CCC certification/marking
Surroundings:
Ambient temperature -25...... 70 degrees Celsius (-13...... 158 degrees Fahrenheit)
Storage temperature: -40...... 85 degrees Celsius (-40 ...... 185 degrees Fahrenheit)
Mechanical Properties:
Connector M8 x 1,4-pin
Housing material PBT
Sensing surface PBT
Degree of protection IP67
Tightening torque, housing screws ≤ 1 Nm
This article introduces P+F/Double Capacitive Sensor CBN15-F64-A0-V31 products, if you are interested in P+F/Double Capacitive Sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/OBE20M-R100-S2EP-IO-V31-L through-beam type
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F Retroreflective sensor GLV18-55-S/25/102/159
Introduction:P+F Retroreflective Sensor GLV18-55-S/25/102/159 Retroreflective Photoelectric Sensor with Polarization Filter, M18 Threaded Housing Design, Plastic Housing, Side Optical End, 3.5 m Detection Range, Red Light, Bright On, DC Type, NPN Output, M12 Plug ...
|
|
P+F/GZ Sensor GL10-RT / 30 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F OBE12M-R100-S2EP-IO through-beam photoelectric sensor
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F/Sensor NBN4-12GM40-E2-V1 4 mm
Introduction: The inductive sensor is to use electromagnetic induction to convert the measured physical quantities such as displacement, pressure, flow, vibration, etc. into the change of self-inductance coefficient and mutual inductance coefficient of the coil, and then convert the output of voltage or current change by the circuit to realize the conversion of non-electricity to electricity.
...
|
|
P+F/Diffuse Reflex Mode Sensor GLV18-8-200 /115/120
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range.
Our customer-centric service philosophy ...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Capacitive sensor CCN5-F46A-E1/E3 non-flush 5mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/73c/76a/136
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F through-beam sensor OBE20M-R100-S2EP-IO-L
Description: P+F/Laser through-beam sensor OBE20M-R100-S2EP-IO-L Small design, multifunctional mounting options, multiple frequencies to prevent mutual interference (anti-crosstalk), high degree of protection IP69K.
...
|
|
P+F/Capacitive sensor CJ4-12GK-N-5M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBB0,6-3M22-E2 flush 0.6 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBB20-L2-E2-V1 20mm
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/2D Laser Scanner R2000 5-pin M12x1 connector
Product Introduction: The R2000 series combines standard sensors with the latest measurement methods. The R2000 2D laser scanner (also known as 2D LiDAR sensor) is equipped with the innovative Pulse Ranging Technology (PRT) to deliver reliable and extremely precise measurement results with 360° gap-free ...
|
|
P+F/Fork sensor GL30-IR / 32 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F/Triangulation sensor OQT150-R101-2EP-IO 150 mm
Product Introduction: Switching sensors with measurement core technology have an enhanced range of functions. Based on the Multipixel Technology (MPT) developed by Pepperl + Fuchs, multiple operating modes and switching points can be easily set in a single triangulation sensor. These photoelectric ...
|
|
P+F/Sensor NBN3-F31K2-E8-B43-S 2.5 mm
Introduction: P+F/Sensor NBN3-F31K2-E8-B43-S is mounted directly on a standard actuator, waterproof housing, suitable for outdoor use, temperature range -40 ... 167 °F (-40°C to 75°C), energized LED, LED indicating sensor and solenoid status switching, mating end ...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P4 4-wire
Introduction:P+F capacitive sensor CJ40-FP-A2-P4 series rectangular, housing material is POM / metal, output type 4 wires, non-flush mounting, DC voltage type, screw terminal connection type, protection class IP65.
...
|
|
P+F/Bi-material sensor UDC-18GM50-255S-3E0
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Inductive sensor NCB1,5-8GM25-N0-Y295009
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR...
|
|
Contact
working hours
