Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. In addition, there is no problem of alignment between the transmitter and the receiver.
Specifications:
Product Description | Compact optoelectronic fork sensor for small parts, T-shaped design, fork width 5 mm, infrared light, NPN output, fixed cable |
General characteristics | The type of light source | IRED | The type of light source | Infrared continuous light, 940 nm | Target size | 0.8 x 1.8 mm | Groove width | 5 mm | Functional safety parameters | Mean time to failure (days) | 3760 a | Service life (...) Month... days) | 20 a | Scope of diagnosis | 0 % | Indicator/Action key | Function display | The red LED lights up when it receives a beam | Electrical characteristics | Operating voltage | 5 ... 24 V DC, 2 stage | output | Switch type | Turn on when it's light/dark | Signal output | 2 NPN complementary outputs, overvoltage protection | Conformity with the system of standards and norms | Directive compliant | | | EMC Directive 2004/108/EC | EN 60947-5-2:2007 + A1:2012 | Surroundings | Degree of contamination | 2 | Mechanical properties | Ingress protection | IP50 | connect | 2 m PVC cable, 4 x 0.09 mm2 | material | | | enclosure | PBT |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/M100/MV100-6090/102/115 through-beam photoelectric sensors
Product Introduction: Thru-beam sensor, miniature design, miniature sensor light forming slit, easy to use, very bright, high visible light point, full metal threaded mounting.
Our customer-centric service concept: the pursuit of a full range of services is a ...
|
|
P+F/Capacitive Proximity Sensor CBN15-F64-E2 15mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/OBE20M-R100-S2EP-IO-V31-L through-beam type
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F Signal Conditioner S1SD-1AI-1C.H Resistance 50Ω
Introduction: The P+F signal conditioner SC series provides isolation in an extremely compact package and is optimized for the application requirements of the safe area. Connected via screw terminals, according to EN 60715:2001, mounted on a 35 mm DIN mounting rail.
...
|
|
P+F/Inductive sensor NBB3-V3-Z4 3 mm flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Inductive sensor NBB0,6-3M22-E2 flush 0.6 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/UB100-F77-E0-V31 ultrasonic direct detection sensor
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications:
...
|
|
P+F Inductive Positioning System PMI120-F90-IU-IO-V15
Introduction:P+F Inductive Positioning System PMI120-F90-IU-IO-V15 Reverse Polarity Protection, Analog Current or Voltage Output, Programmable; Linearity ranges from 1 to 119 mm; PBT, stainless steel 1.4571, brass, nickel-plated housing.
...
|
|
P+F/Inductive sensor NBB8-18GM50-E0 8mm flush
Introduction:P+F/Beijiafu inductive sensor NBB8-18GM50-E0 has a detection distance of 8mm and is installed flush; It has a longer working distance; Extended temperature range; -40 to +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F Zener Barrier Z System DIN rail mounting
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection
Product Details
Zener barriers provide cost-effective explosion protection for a wide range of applications in process automation systems. Transferred to a dangerous place ...
|
|
P+F/Diffuse Mode Sensor GLV18-8-450 /73/120
Product Introduction: Diffuse Mode Sensor, M18 Threaded Housing Design, Plastic Housing, Front Optical Surface, 450 mm Detection Range, Red Light, Light & Dark, DC Type, 2 PNP Outputs, M12 Plug, High Efficiency Circuit in M18 Plastic Housing, For Standard Applications, Very High Detection Range, 4 ...
|
|
P+F/Capacitive sensor CBN15-F64-A2 voltage drop ≤2V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, whether it is ...
|
|
P+F/Capacitive sensor CBN15-F64-A0 has a voltage drop of ≤2V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CBB10-30GKK-A2 10mm flush
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Optical fiber optic sensor SU19.1/110/115 30μs
Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode.
...
|
|
P+F/Capacitive sensor CBN10-F46-E2-10M core cross-section: 0.14mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBN3-F31-E8-K-K 3 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output mode to ...
|
|
P+F/Inductive sensor NBN4-12GM50-E1 with a housing diameter of 12 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F inductive sensor NBB0,6-3M22-E2 pulse
Description: P+F Inductive sensor NBB0,6-3M22-E2 pulse, nominal working distance: 0,6 mm, operating voltage: 10 ... 30 V, switching frequency: 0 ... 1400 Hz
peculiarity
0.6 mm, flush
Miniature design
Product parameters
...
|
|
P+F/Capacitive sensor CBN15-30GK60-A0 NPN15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
