Introduction: The inductive sensor is to use electromagnetic induction to convert the measured physical quantities such as displacement, pressure, flow, vibration, etc. into the change of self-inductance coefficient and mutual inductance coefficient of the coil, and then convert the output of voltage or current change by the circuit to realize the conversion of non-electricity to electricity.
Product parameters
General Characteristics:
Switch function: normally open (NO)
Output type pnp
Rated working distance 4mm
Installation: Non-flush mounting
Output polarity
Guaranteed operating distance 0... 3.24 mm
The reduction coefficient is 0.45
The reduction coefficient rcu is 0.4
Reduction factor r304 0.75
Rating:
Operating voltage 10... 30 V
Switching frequency 0... 1200 Hz
Hysteresis typ. 5%
Reverse Polarity ProtectionReverse Polarity Protection
Short-circuit protection pulses
Voltage drop≤ 2V
Operating current: 0... 200 mAh
Off-state current 0... 0.5 mA type. 0.1µA, 25°C
The no-load supply current ≤ 15mA
Switch status indicator LED, yellow
Functional safety parameters:
mttfd 3220a
Mission Time (TM) 20a
Diagnostic Coverage (DC) 0%
Licensing & Certification:
UL certified culus listed, generic
CSA approved CCSAUS for listing, GM
CCC certification/marking is not required for products rated ≤ 36v
Surroundings:
Ambient temperature -25... 70°c(-13… 158°F)
Mechanical Properties:
Connection type: connector M12 x 1,4-pin
Housing material brass, nickel plated
Sensing surface PBT
The diameter of the shell is 12mm
Degree of protection IP67
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is P+F/Beijiafu sensor NBN4-12GM40-E2-V1 4 mm products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR / 110 /124/167
Product Introduction: Rugged Diffuse Mode Sensor for Monitoring Web Breakage, Compact Housing Design, Foreground and Background Suppression, 60mm Detection Range, IR Light, Push-Pull Output, Weak Signal Output, M12 Plug, Web Break Control and Special Equipment for Printing Machinery, Contamination ...
|
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40-SE2-V1 PNP
Product introduction: The working principle of ultrasonic through-beam sensor is to detect an object by emitting sound waves from the transmitter to the receiver and being interrupted by the sound beam by the target object. The transmitter generates an ultrasonic signal that is received and evaluated by the receiver. When the ultrasonic beam is attenuated or interrupted by an object, the receiver ...
|
|
P+F/Inertial Measurement Device IMU360D-F99-B20-V15
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/The capacitive sensor CJ10-30GK-WO has a working distance of 10 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Beam Ultrasonic Barrier UBEC300-18GH40-SE2-V1
Introduction: An ultrasonic through-beam sensor consists of a transmitter and a receiver mounted facing each other. Ultrasonic through-beam sensors work by emitting sound waves from the transmitter to the receiver to detect objects through the sound beam being interrupted by the target object. The emitter produces ultrasonic ...
|
|
P+F/Radiator LA31/LK31/31/115 LEDs
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F/Throughbeam GD18 / GV18 /73/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical face, 20m detection distance, red light, light and dark, DC version, 2 PNP outputs, M12 plug, high efficiency line, short M18 plastic housing application, very high detection range, 4 LEDs ...
|
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Inductive sensor NBB8-18GM50-E0-M 8mm
Summary: Inductive proximity sensors are the product of choice for most applications that require the precise and non-contact detection of metal objects in machinery or automation. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality inductors.
|
|
P+F/Inductive sensor NCB1,5-8GM25-N0-Y295009
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR...
|
|
P+F Signal Conditioner S1SD-1AI-1C.H Resistance 50Ω
Introduction: The P+F signal conditioner SC series provides isolation in an extremely compact package and is optimized for the application requirements of the safe area. Connected via screw terminals, according to EN 60715:2001, mounted on a 35 mm DIN mounting rail.
...
|
|
P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 20 g
Description: The P+F/P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 with its ultra-small housing design and 45° cable outlet provides maximum installation freedom, even in very space-constrained conditions.
Product Features ...
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F capacitive sensor CJ10-30GK-WS housing diameter 30 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F through-beam photoelectric sensor OBE10M-18GM60-SE4-V1
Introduction: OBE10M-18GM60-SE4-V1 Thru-beam Photoelectric Sensor Two-color Indication LED; Bright/dark, programmable; Sensitivity regulator to ensure optimal application needs; Degree of protection IP67; Robust cylindrical metal housing M18 x 1.
...
|
|
P+F/Capacitive sensor CBN8-F64-E1 8mm non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F photoelectric sensor M100/MV100-RT/35/76a/95/103
Description: The through-beam sensors are designed in a miniature design with a slit in the light of the miniature sensor, which is easy to use, very bright, with a high visible light point, full metal threaded mounting, and the high-efficiency series is mounted in a short M18 plastic housing for standard applications.
...
|
|
P+F sensor NBN40-L2-E0-V1 40 mm non-flush
Introduction: NBN40-L2-E0-V1 is a kind of switch sensor (i.e., non-contact switch), which has the characteristics of travel switch and micro switch, and has sensing performance, and reliable action, stable performance, fast frequency response, long application life, strong anti-interference ability, etc.
|
|
P+F magnetic field sensor MMB60-12H50-E2-V1 60 mm
Introduction: Magnetic sensors with M12 cylindrical housing are used in conventional magnet detection. A non-contact detection sensor for piston position is also available for steel hydraulic cylinders. These sensors are easy to install and do not require a mounting slot or installation in the cylinder.
|
|
P+F/M100/MV100-6090/102/115 through-beam photoelectric sensors
Product Introduction: Thru-beam sensor, miniature design, miniature sensor light forming slit, easy to use, very bright, high visible light point, full metal threaded mounting.
Our customer-centric service concept: the pursuit of a full range of services is a ...
|
|
Contact
working hours
