Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Features:
5mm non-flush
3-wire DC
Flat shell
Chemically resistant PVDF housing
Cable tie mounting slots
IP68 degree of protection
Through-holes for screw mounting
Product parameters
Switching function: normally closed (NC)
Output type NPN
Rated working distance 5mm
Non-flush mounting
Output polarity DC
Guaranteed working distance 0...... 3.5 mm
rating
Installation conditions
B 0 mm
C 10 mm
F 20mm/50mm
Operating voltage: 10...... 30 volts DC
Switching frequency: 0...... 10 Hz
Lag 1...... 10 typical values. 5%
Reverse Polarity ProtectionReverse Polarity Protection
Short-circuit protection pulses
The voltage drop ≤ 2 V
Voltage dro at IL
Voltage dro IL = 10 mA, switching element on 0.8...... 2.2 V (typical). 1.4 volts
Operating current: 0...... 100 mAh
The minimum operating current is 0 mA
Off state current: 0...... 0.5 mA (typical). 0.01 mAh
The shutdown state current is TU = 40°C, and the switching element is ≤ 100μA when the switching element is turned off
The no-load supply current ≤ 15 mA
Switch status indicator LED, yellow
Licensing & Certification:
UL listed cULus list, generic
CSA certification cCSAus is listed and universal
CCC approval/marking is not required for products with a CCC approved rating of ≤ 36 V
Surroundings:
Ambient temperature -25...... 70 degrees Celsius (-13...... 158 degrees Fahrenheit)
Storage temperature: -40...... 85 degrees Celsius (-40 ...... 185 degrees Fahrenheit)
Mechanical Properties:
Connecting cable FEP, 2 m
Core cross-section: 0.14 mm2
Housing material PVDF
Sensing surface PVDF
IP68 degree of protection
Note: The tensile strength of the cable is 20 N
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the P+F/Double Capacitive Sensor CCN5-F46A-E1/E3 products, if you are interested in P+F/Double Capacitive Sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
P+F/Fiber Optic Sensor MLV41-LL-IR-1347 M12 plug
Product Introduction:Rugged and stable fiber optic sensor for glass fiber optic optic application, infrared light, PNP output, M12 plug, Robust fiber optic sensor for stable operation performance in various conditions, Continuously adjustable sensitivity, Snap-action clamp lock for easy fiber installation, with excellent ...
|
|
P+F/Sensor NBN4-12GM60-A2-V1 4 mm non-flush
Introduction: NBN4-12GM60-A2-V1 standard inductive sensor smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, ...
|
|
P+F/Ultrasonic sensor UC6000-30GM-2EP-IO-V15
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications ...
|
|
P+F/Capacitive sensor CCN15-30GS60-A0/A2 complementary output
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
The P+F/GIF sensor GLD3-RT /115/147 is programmable
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F through-beam photoelectric sensor GD18-S/GV18-S/73/120
Description: Thru-beam sensor, miniature design, light forming slit of miniature sensor, easy to use, very bright, high visible light point, all-metal threaded mounting, high-efficiency series mounted in a short M18 plastic housing, suitable for standard applications.
...
|
|
P+F inductive sensor NBN4-F25K-E8 4 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for standard inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output ...
|
|
P+F/Inductive sensor NBB4-12GM30-E2-V1 4mm
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Capacitive sensor CBN15-F64-A0 has a voltage drop of ≤2V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Fork sensor GL30-IR / 32 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F/Retroreflective Area Sensor RLG28-55 / 115B / 136
Product Introduction: Retroreflective area sensor with 6 beams in a widely used standard photoelectric housing, red light, 4 m detection range, switchable bright/dark, push-pull output, M12 plug, reflective area sensor housing with 6 beams in a standard photoelectric sensor, connector and ...
|
|
P+F/Triangulation sensor OQT150-R101-2EP-IO 150 mm
Product Introduction: Switching sensors with measurement core technology have an enhanced range of functions. Based on the Multipixel Technology (MPT) developed by Pepperl + Fuchs, multiple operating modes and switching points can be easily set in a single triangulation sensor. These photoelectric ...
|
|
P+F Capacitive sensor CCB10-30GS55-N1-V1
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
Give birth...
|
|
P+F/Inductive sensor NBN4-12GM50-E1 with a housing diameter of 12 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
Germany P+F/Bejiafu capacitive sensor CBN2-F46-E1/E3 3-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Encoder RVI58N-*******1 Incremental
Introduction: An incremental encoder provides a fixed number of pulses in one revolution, and the speed is calculated by the number of pulses measured per unit of time. To measure angles and positions, it is common to start counting from a starting reference point. The accuracy of incremental encoders depends on mechanical and electrical factors ...
|
|
The P+F incremental encoder AH40 weighs approx. 160 g
Introduction: Incremental Encoder AH40, Industry Application: Textile Machinery, Bending Machinery, Printing Machinery, Metallurgical Industry, Elevator Product Structure: Empty Row Shaft, Outer Diameter (mm): 40mm, Bore Diameter/Shaft Diameter (mm): 8mm, Resolution (CPR): 1-1024 PPR, Working Voltage: 4,75... 30 V D ...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/76a/115/136
Product Description: Thru-beam sensor, 30 m detection range, red, low, DC version, 2 push-pull outputs, transmitter off, fixed cable, high visibility LED, powerful push-pull output, compact and stable housing, degree of protection II
Our customer-centric ...
|
|
P+F/Capacitive sensor CBN10-F46-E2-10M core cross-section: 0.14mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
