Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in processor. These components are already configured at the factory and cannot be used separately.
Specifications:
General specifications | Sensing range | 40 ... 100 mm optimal distance 75 mm | Sensor frequency | 255 kHz | Indicators/means of operation | LED green | Indicator: A single substance is detected | LED yellow | Indicator: No Matter Detected (Air) | LED red | Indicator: Dual material detected | Electrical Specifications | Operating voltage | 18 ... 30 V DC, ripple 10% SS | No-load current | <65 mA | input | Enter the type | Functional inputs
Class 0: -U B ... -U B + 1V
Level 1: + U B - 1 V ... + U B | Pulse length | ≥100 ms | impedance | ≥4kΩ | yield | Output type | 3 switch outputs NPN, NO | Rated operating current | 3 x 100 mA, short-circuit/overload protected | Voltage drops | ≤3 V | Turn on latency | About. 35 ms | Turn off the delay | About. 35 ms | Pulse expansion | Minute. 120 ms programmable | Approvals and certificates | UL recognized | cULus Universal Class 2 Power Supply | CSA approved | cCSAus is listed as a general-purpose Class 2 power supply | CCC approved | Products with a rated voltage of ≤ 36V do not require CCC certification/marking | Environmental conditions | Ambient temperature | 0 ... 60°C（32 ... 140°F） | Storage temperature | -40 ... 85°C（-40 ... 185°F） | Mechanical Specifications: | Connection type | Wired PVC, 2 meters | Core cross-section | 0.14mm 2 | Ingress protection | IP67 | material | | | housing | nickel-plated brass; Plastic parts: PBT | | sensor | epoxy/hollow glass sphere mixture; Polyurethane foam | block | 150 grams |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Gasford accelerometer F99 series measuring range -2~+ 2 g
Introduction: The F99 series of accelerometers is a complex mechanical system that uses accelerometers to ensure accurate real-time monitoring of the machine's vibrations. Accelerometers detect wear and tear on machine components and any critical operating conditions. Thus guaranteeing the execution of corrective actions to avoid potential damages.
|
|
P+F/Inductive sensor NBN4-12GM50-E2-V1-Y89925
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/UB1000-18GM75-E5-V15
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
German P+F/Capacitive sensor CBN10-F46-E2-0, 4M-V3
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F inductive sensor NBB20-U1-Z2 flush 20 mm
Description: Inductive sensors are available in smooth or threaded stainless steel housings, reverse polarity protection and short-circuit protection, LED status indication, M8, M12 connector connection or terminal wiring, PVC, PUR or silicone cable outlet, 2-wire, 3-wire, 4-wire DC, AC, N...
|
|
P+F/Capacitive sensor CBN8-F64-E1 8mm non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN15-F64-A2-0, 3M-V1
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CJ40-FP-A2-P1 is non-flush mounted
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set in a wide range by using a potentiometer. One terminal connector** can be fitted with up to two conductors with the same cross-sectional area of the core.
...
|
|
P+F Inductive Sensor NBB8-18GM60-US 8mm
Summary: Inductive proximity sensors are the best for most applications that require non-contact and accurate detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality inductors.
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F Signal Conditioner S1SD-1AI-1C.H Resistance 50Ω
Introduction: The P+F signal conditioner SC series provides isolation in an extremely compact package and is optimized for the application requirements of the safe area. Connected via screw terminals, according to EN 60715:2001, mounted on a 35 mm DIN mounting rail.
...
|
|
P+F/2D Laser Scanner R2000 5-pin M12x1 connector
Product Introduction: The R2000 series combines standard sensors with the latest measurement methods. The R2000 2D laser scanner (also known as 2D LiDAR sensor) is equipped with the innovative Pulse Ranging Technology (PRT) to deliver reliable and extremely precise measurement results with 360° gap-free ...
|
|
P+F/Capacitive sensor CBN5-F46-E2-10M 5mm
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Through-beam photoelectric sensor OBE500-R2F-SE2 500 μs
Description: OBE500-R2F-SE2 through-beam photoelectric sensor, low profile design, space-saving M2 mounting, 500 mm detection range, red light, dark on, PNP output, fixed cable.
Product parameters
**Examine...
|
|
P+F/Ultrasonic sensor UC6000-30GM-2EP-IO-V15
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications ...
|
|
P+F/Capacitive sensor CJ10-30GM-WS current: 5~200mA
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CCN5-F46A-E1/E3 non-flush 5mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Throughbeam GD18 / GV18 /73/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical face, 20m detection distance, red light, light and dark, DC version, 2 PNP outputs, M12 plug, high efficiency line, short M18 plastic housing application, very high detection range, 4 LEDs ...
|
|
P+F/Sensor NBN4-12GM40-E2-V1 4 mm
Introduction: The inductive sensor is to use electromagnetic induction to convert the measured physical quantities such as displacement, pressure, flow, vibration, etc. into the change of self-inductance coefficient and mutual inductance coefficient of the coil, and then convert the output of voltage or current change by the circuit to realize the conversion of non-electricity to electricity.
...
|
|
P+F/DK20-9, 5/110/124 RGB light
Product introduction: The characteristics of P+F color mark sensor are: low contrast detection under high resolution, short response time; It is not sensitive to the deviation of the height and angle of the detected material; The optical lenses are 90° interchangeable. As long as you simply press the TEACH-IN button, the transmitter LED will automatically select the best ...
|
|
Contact
working hours
