Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Product Specifications:
Switch Function: Normally Open (NO)
Output Type: NAMUR
Rated working distance: 4 mm
Installation: Non-flush
Reliable operating distance :0 ... 2,88 mm
Output Type: 2-wire
Rating:
Installation conditions
A ：20 mm
B ：80 mm
C ：12 mm
F ：70 mm
Rated voltage: 8 V
Operating voltage :7 ... 12 V
Switching frequency: 0 ... 1 Hz
Current consumption
Measuring plate not detected :max. 1 mA
Measuring plate detected: ≥ 2,4 mA
Functional safety parameters
Mean time to failure (days): 3299 a
Service life (...) Month... days): 20 a
Diagnostic range: 0 %
Consistency with standards and norms:
Meets standards
NAMUR EN 60947-5-6:2000
IEC 60947-5-6:1999
Licensing & Certification:
FM certification
Control chart: 116-0165
UL Listed: cULus Listed, general requirements
CSA Listed: cCSAus Listed, General Purpose
CCC approval: Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark.
Surroundings
Ambient temperature :-25 ... 70 °C （-13 … 158 °F）
Mechanical properties
Connection type : cable PVC, 5 m
Conductor cross-sectional area: 0,34 mm2
Housing material :P BT
Sensing surface :P BT
Degree of protection: IP68
cable
Bend radius: > 10 x cable diameter
Grade: 1G; 2G; 1D
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces P+F/Double Capacitive Sensor CJ4-12GK-N-5M products, if you are interested in P+F/Double Capacitive Sensor, also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience. |
More on that
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40-SE2-V1 PNP
Product introduction: The working principle of ultrasonic through-beam sensor is to detect an object by emitting sound waves from the transmitter to the receiver and being interrupted by the sound beam by the target object. The transmitter generates an ultrasonic signal that is received and evaluated by the receiver. When the ultrasonic beam is attenuated or interrupted by an object, the receiver ...
|
|
P+F/Capacitive sensor CBN10-F46C-EI 7mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
Give birth...
|
|
P+F/Fork sensor GL30-IR / 32 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P1 40mm
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set over a wide range using a potentiometer. Up to two conductors with the same core cross-sectional area can be installed with one terminal connector.
...
|
|
P+F/Tilt sensor INX360D-F99-I2E2-5M IP68/IP69K
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
The P+F/GIF sensor GLD3-RT /115/147 is programmable
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F Inductive Sensor NBB15-30GM50-E0 15mm
Introduction: P+F Inductive Sensor NBB15-30GM50-E0 15mm flush; Longer working distance; Extended temperature range -40 ... +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Triangulation sensor OQT150-R101-2EP-IO 150 mm
Product Introduction: Switching sensors with measurement core technology have an enhanced range of functions. Based on the Multipixel Technology (MPT) developed by Pepperl + Fuchs, multiple operating modes and switching points can be easily set in a single triangulation sensor. These photoelectric ...
|
|
P+F/Inductive sensor NBB20-L2-E2-V1 20mm
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Inductive sensor NBN4-12GM40-E0/E2 DC 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Inductive sensor NBB2-12GM50-E2-V1 2 mm
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Capacitive sensor CJ4-12GK-N 4mm non-flush
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Inductive sensor NBB8-18GM50-E0 8mm flush
Introduction:P+F/Beijiafu inductive sensor NBB8-18GM50-E0 has a detection distance of 8mm and is installed flush; It has a longer working distance; Extended temperature range; -40 to +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F/Through-beam GD18 / GV18 /115/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical surface, 20 meters detection distance, red light, light and dark, DC version, 2 PNP outputs, fixed cable, high efficiency line, short M18 plastic housing application, very high detection range, 4 LED fingers...
|
|
P+F/Capacitive sensor CBN8-F64-E1 8mm non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/2D Laser Scanner R2000 5-pin M12x1 connector
Product Introduction: The R2000 series combines standard sensors with the latest measurement methods. The R2000 2D laser scanner (also known as 2D LiDAR sensor) is equipped with the innovative Pulse Ranging Technology (PRT) to deliver reliable and extremely precise measurement results with 360° gap-free ...
|
|
P+F/Capacitive sensor CCN15-30GS60-A0/A2 complementary output
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Diffuse Mode Sensor GLV18-8-450 /73/120
Product Introduction: Diffuse Mode Sensor, M18 Threaded Housing Design, Plastic Housing, Front Optical Surface, 450 mm Detection Range, Red Light, Light & Dark, DC Type, 2 PNP Outputs, M12 Plug, High Efficiency Circuit in M18 Plastic Housing, For Standard Applications, Very High Detection Range, 4 ...
|
|
P+F photoelectric sensor M100/MV100-RT/35/76a/95/103
Description: The through-beam sensors are designed in a miniature design with a slit in the light of the miniature sensor, which is easy to use, very bright, with a high visible light point, full metal threaded mounting, and the high-efficiency series is mounted in a short M18 plastic housing for standard applications.
...
|
|
Contact
working hours
