Automobile is one of the pillar industries of the national economy, with the rapid development of China's automobile industry, the pursuit of higher detection speed is gradually reflected. The automobile steering shaft is an important part of the automobile power system, the upper part is fixedly connected with the steering wheel, and the lower part is connected with the steering gear; Its performance of ...

1. Physical sensor: A physical sensor is a sensor that detects a physical quantity. It is a device that uses certain physical effects to convert the measured physical quantity into a signal in the form of energy that can be easily processed. There is a definite relationship between the output signal and the input signal. The main physical ...

The logistics industry has always been a strong area of SICK, in response to the detection of various goods on different conveyor lines and the diverse needs of customers, SICK has launched a series of photoelectric sensors such as G6, Z18, W16, W26 and Ray26 - which can detect cartons, baskets, uneven appearance, transparent bottles, laminated bags, etc.

1. Be sure to check whether the power supply used is in line with DC12-24V±10%, and the maximum is not more than 40V, otherwise the photoelectric switch may be damaged. 2. In order to ensure high stability detection, it is necessary to ensure that two points are achieved: first, the detection distance meets the specified rated detection distance, such as the detection distance is 12±2mm ...

Capacitance – As the name suggests, these sensors work by recording changes in capacitance, which is a function of charge and voltage between two surfaces with an air gap or other material known as the dielectric constant. When the object to be measured enters the sensor field, it has an impact on the medium.

(1) Since the inspection can be carried out in a non-contact manner, it does not wear or damage the object to be inspected. (2) Since the contactless output method is adopted, the life extension (except for the magnetic type) is made of semiconductors, and the life of the docking point is not affected. (3) It is not the same as the light detection method.

Proximity sensors are divided according to their working principle: High-frequency oscillation type, capacitive type, induction bridge type, permanent magnet type, Hall effect type, etc. According to the principle of operation, it can be divided into three categories: High-frequency oscillation type using electromagnetic induction, magnetic force type using magnets, and ...

1. There is a difference between two-wire system and three-wire system for proximity sensors, and three-wire proximity sensors are divided into NPN type and PNP type, and their wiring is different. 2. The wiring of the two-wire proximity sensor is relatively simple, and the proximity sensor and the load can be connected to the power supply after being connected in series. 3. Three-line ...

1. There are 4 wires for the wiring sensor, among them, the red or brown wire is connected to the positive power supply, and the black wire is connected to the negative power supply; The green or blue wire is the dark output line, and the white or yellow wire is the bright output line, the user can choose one of them according to his needs, and the other is not used, but it should be insulated. Lines are not allowed ...

Traditional sole gluing needs to be done manually, and this process generally has a high temperature and fast toxicity volatilization. However, with the development of Industry 4.0, outdated equipment, rising costs, poor production environment, and shortage of personnel in this type of work have become important reasons for the upgrading and transformation of this process. SICK in partnership ...

Based on the InspectorP series of Sick 2D smart cameras, the deep learning SensorApp Intelligent Inspection Plus was officially launched, adding "Anomaly detection" and "Classification ...

In the digitalization stage, the first step of the development path of Industry 4.0, Sick is committed to the design and development of intelligent sensors, aiming to lay a solid hardware foundation for digital transformation. Now, Sick has added a new member to the family of smart sensors – the magnetic corner sensor MAS. ...

With the strong addition of ZS36x8 series handheld guns, SICK's handheld barcode reading product line is becoming more and more perfect, from general to professional, from 1D code to QR code, and then from conventional label barcode to DPM direct marking barcode, we give more accurate handheld solutions for different application scenarios ...

In our daily lives, we can easily see a large number of 1D and 2D codes everywhere, and such visual barcodes have become one of the main applications of track and trace technology in various modern automation applications. With the iteration of technology updates, more and more ...

1. Accuracy 2. Environmental conditions 3. Wavelength range 4. Calibration 5. Resolution 6. Cost 7. Repeatability 8. Frequency

Principle: Contrast sensors are often used to detect spots on specific color marks or objects, and they are used to detect color marks by comparing them to non-color mark areas, rather than directly measuring color. The color mark sensor is actually a reverse device, where the light source is mounted perpendicular to the target object, and the receiver is connected to the ...

1. Wiring There are 4 outgoing wires of the sensor, among them, the red or brown wire is connected to the positive power supply, and the black wire is connected to the negative power supply; The green or blue wire is the dark output line, and the white or yellow wire is the bright output line, the user can choose one of them according to his needs, and the other is not used, but it should be insulated. The lines are not ...

Are you still having a headache about detecting the presence or absence of objects? Are you still bothered by checking the liquid level? Are you still troubled by the limited installation of application scenarios? Today, SICK is back with the secret weapon of substance detection: capacitive proximity sensors. 　　This capacitive sensing ...

With the rapid development of industrial automation in recent years, machine vision, as a smart brain endowed with "eyes" to machines, has been widely used in various fields of intelligent manufacturing. In the context of the rapid penetration of artificial intelligence in the Internet and emerging industries, traditional industries are also constantly promoting intelligent ...

With the obvious trend of population aging and the innovation and development of the medical and pharmaceutical industry, it can be expected that the demand for pharmaceutical products in China will continue to grow rapidly, and it is estimated that the industry scale will reach 2.15 trillion yuan by 2024. The huge market size also means more fierce market competition, plus ...

1) The target to be measured: the infrared system is set according to its infrared radiation characteristics; 2) Atmospheric attenuation: When the infrared radiation of the object to be measured passes through the atmosphere, it will be affected by a variety of substances and the attenuation phenomenon occurs; 3) Optical receiver: used to receive part of the infrared radiation and ...