What are the features of Sick Sensors – Proximity Sensors?

First, the transmission effect Through the photoelectric sensor, it can be very good to complete the transfer between the media, which is a very popular way of action in many industrial fields and enterprises, because some energy can not be transmitted manually and can only be reached by machines.

As an expert in smart sensors, Sick has teamed up with SATO, a world-renowned manufacturer of printing and recognition solutions. Through the on-site practical application cases, not only the technical characteristics of SICK & SATO were demonstrated, but also the possibility of integrating barcode and RFID technology in the automated production line at the same time.

1. Platinum thermal resistance The platinum metal is used as the temperature sensing element, and then together with the inner lead and the protective tube, the platinum thermal resistance temperature sensor is formed. It is also often connected to external measurement circuits, controls, and mechanisms to form a temperature sensor. This sensor has two main ...

Are you still having a headache about detecting the presence or absence of objects? Are you still bothered by checking the liquid level? Are you still troubled by the limited installation of application scenarios? Today, SICK is back with the secret weapon of substance detection: capacitive proximity sensors. 　　This capacitive sensing ...

The Chinese start-up Youibot relies on the nanoScan3, a proven mobile platform control solution from SICK, for this purpose. Ultraviolet light is harmful to the skin and eyes, but it is very effective in killing viruses. Therefore, the application of ultraviolet light in space disinfection is very wide, and it is also very successful.

Position monitoring of moving objects; Railway catenary survey, building limit survey; Measurement of objects that are not suitable for access; industrial automation and intelligent production management; Automobile speed and traffic statistics; Industrial monitoring signal trigger control; Tower crane ...

1. Long detection distance If the detection distance of 10 m or more is retained in the through-beam type, it is possible to achieve detection that is not possible with other detection methods (magnetic, ultrasonic, etc.). 2. There are few restrictions on the detected objects Due to the detection of shading and reflection caused by the detection of objects ...

As we all know, incremental encoders are used to monitor rotational speed or position, and are widely used in all kinds of automated machinery. With the continuous development of the industrial control industry and the continuous change of product demand, SICK has launched a more cost-effective and cost-effective small incremental encoder market in the large and competitive small incremental encoder market.

1. The signal cable of the sensor should not be arranged in parallel with the strong current power line or control line (for example, do not place the sensor signal line in the same pipe as the strong power line and the control line). IF THEY MUST BE PLACED IN PARALLEL, THEN THE DISTANCE BETWEEN THEM SHOULD BE KEPT AT LEAST 50CM, AND THE SIGNAL ...

1. There is a difference between two-wire system and three-wire system for proximity sensors, and three-wire proximity sensors are divided into NPN type and PNP type, and their wiring is different. 2. The wiring of the two-wire proximity sensor is relatively simple, and the proximity sensor and the load can be connected to the power supply after being connected in series. 3. Three-line ...

Magnetostrictive technology and magnetostrictive encoders are increasingly used in linear motion measurement in various industrial equipment due to their wear-free, maintenance-free, and reliable absolute position detection. Condition-based diagnostics and predictive maintenance enable efficient production, where the intelligent functions of sensors are increasingly ...

1. First of all, the front face of the photoelectric sensor must be parallel to the surface of the workpiece or object to be detected, so that the conversion efficiency of the photoelectric sensor will become high. 2. When installing and welding, the small distance between the root of the pin of the photoelectric sensor and the pad shall not be less than 5 mm, otherwise ...

In the electronics industry, optimizing products and processes is at the heart of the smart solutions of the future. The end product will be smaller, flatter and lighter, expanding its performance in a completely new size. The more streamlined the automation solutions are, the more they can make the most of their quality and cost savings.

Infrared sensors are sensors that use the physical properties of infrared rays to make measurements. Infrared, also known as infrared light, has the properties of reflection, refraction, scattering, interference, absorption, etc. Any substance that has a certain temperature above absolute zero can radiate infrared rays. ...

SICK Germany has been ranked 2nd in the list of "Best Employers in Germany 2022"! For 20 years in a row, SICK has been on the list of "Best Employers in Germany"! The list is published by the Great Place to Work Institute®, the world's leading ...

In the digitalization stage, the first step of the development path of Industry 4.0, Sick is committed to the design and development of intelligent sensors, aiming to lay a solid hardware foundation for digital transformation. Now, Sick has added a new member to the family of smart sensors – the magnetic corner sensor MAS. ...

1. Laser ranging sensor 2. Measuring distance range 0.5-300 meters, 3000 meters (to use reflector) 3. The accuracy error of the whole process is 20 mm 4. The continuous service life of the laser is more than 50,000 hours (5 years) 5. Standard RS232, RS422 ...

With the development of Industry 4.0, the intelligent level of the production line of high-speed smart home enterprises has been continuously improved, and the processes of cutting, edge banding, drilling, sorting, spraying, and packaging have been integrated to achieve a real "unmanned factory". 　　Intelligent and flexible production equipment allows robots to ...

1. Industrial sensors The SICK industrial sensor portfolio includes the widest range of photoelectric sensors, fiber optic amplifiers, color mark sensors, proximity sensors, magnetic cylinder sensors, and measuring light curtains in the automation sector, which are mainly used for: recording, counting, classifying, and positioning objects.

(1) Automatic calibration: When the workpiece enters the sensitive area of the probe, press and hold the "SET" button for 3 seconds, and the sensitivity value will be set and displayed in green. (2) Two-point calibration: When the workpiece does not enter the sensitive area, hold and hold the "SET" button for three seconds, there is a ...