A detailed description of the Sick ZS36x8 series of handheld guns

Analysis of the factors that may cause the zero point change of the SICK sensor: overload will lead to a sudden change in the zero point, and the output resistance will obviously exceed the specified value impact, as above; Moisture return or turbidity, so it is mainly manifested as a continuous change of 0 point, high and low, etc., at this time, the ground resistance will be further reduced - in ...

Infrared sensors are sensors that use the physical properties of infrared rays to make measurements. Infrared, also known as infrared light, has the properties of reflection, refraction, scattering, interference, absorption, etc. Any substance that has a certain temperature above absolute zero can radiate infrared rays. ...

1. Photodiode Photodiodes are generally in reverse operation in circuits Dark current, photocurrent (the stronger the light, the photocurrent?) ） 2. Phototransistor There is no lead-out at the base, and the collector is positive with respect to the emitter When the light shines on ...

As a special sensor for the two-dimensional code positioning and navigation market, GLS621 is mainly used in warehousing AGVs or warehouse handling robots based on the principle of inertial two-dimensional code navigation.

Photoelectric sensor is a small electronic device, a key element to end the photoelectric conversion in various photoelectric detection systems. It is a sensor that uses the various properties of light to detect the presence or absence of objects and changes in the surface state. Photoelectric sensors are non-contact, fast responding, and functionally reliable.

In the electronics industry, optimizing products and processes is at the heart of the smart solutions of the future. The end product will be smaller, flatter and lighter, expanding its performance in a completely new size. The more streamlined the automation solutions are, the more they can make the most of their quality and cost savings.

According to the measurement method, it can be divided into contact type and non-contact type 1。 The detection part of the contact: the contact temperature sensor is in good contact with the measured object, also known as the thermometer The thermometer achieves thermal equilibrium by conduction or convection, so that the indicated value of the thermometer can directly represent the ...

With the change of supply chain and the iterative upgrading of local technology, more and more automation sites have begun to boldly try and successfully apply domestic brand PLC, which ensures the replaceability of parts on industrial sites and improves the "safety" of production stability. Today I want to talk to you about why ...

01 Temperature sensor Temperature sensors measure the heat energy in a heat source, allowing it to detect temperature changes and convert those changes into data. Machinery used in manufacturing often requires a specific level of ambient and equipment temperature. Similarly, within agriculture, soil temperature is ...

The SICK color mark sensor detects a wide range of labels, even if there are subtle differences in the background color, and the processing speed is fast. Automatically adapts to wavelength and is able to detect small differences in grayscale values, regardless of the mixed color of the label and background. SICK color code ...

1. Industrial sensors The SICK industrial sensor portfolio includes the widest range of photoelectric sensors, fiber optic amplifiers, color mark sensors, proximity sensors, magnetic cylinder sensors, and measuring light curtains in the automation sector, which are mainly used for: recording, counting, classifying, and positioning objects.

Infrared sensor installation requirements: 1. Infrared sensors are usually set up in areas where intruders may enter or where high-value items are stored, such as the living room, master bedroom, corridor or corridor of a general family; In general, companies usually set up sensors in computer rooms, corridors, warehouses, etc.

1. NTC RTD Sensor: This type of sensor is a negative temperature coefficient sensor, that is, the sensor resistance decreases with the increase of temperature. 2. PTC RTD sensor: This type of sensor is a positive temperature coefficient sensor, that is, the sensor resistance increases with the increase of temperature ...

With the development of Industry 4.0, the intelligent level of the production line of high-speed smart home enterprises has been continuously improved, and the processes of cutting, edge banding, drilling, sorting, spraying, and packaging have been integrated to achieve a real "unmanned factory". 　　Intelligent and flexible production equipment allows robots to ...

With the continuous promotion of the dual carbon policy, a sustainable production and operation model is particularly important for manufacturing enterprises. The tire and rubber industry is also seeking a greener way of development. With the iterative improvement of the production process, the tire and rubber enterprises will also ...

1. Basic composition The appearance of this series of fiber optic sensors is basically composed of the following parts, from left to right: (1) SET button, this button can be used for sensitivity setting. The basic principle of this sensor is: through the induction of the refractive index of different media by the fiber optic probe, ...

1. Connect the device: connect the power supply and electrical signal to the sensor, connect the output interface to the PLC, connect RS232 to the computer, generally use RS232, but also change to other control methods, such as CAN, RS485 and so on. 2. Software installation: Open the laptop, install ...

Principle of ultrasonic distance sensor: Ultrasonic waves have a great ability to penetrate liquids and solids, especially in solids that are opaque to sunlight, and it can penetrate to a depth of tens of meters. Ultrasonic waves will produce significant reflections when they encounter impurities or interfaces, forming reflections into echoes, which can produce ...

1. First, connect the external hardware and install the external COM port of the scanner to the serial port of the industrial computer. 2. The power supply of the SICK scanner control box is 24V positive and negative induction eyes, and the feedback signals of 10, 11 and 12 corresponding to the electric eyes, 24V+, 24V-. ...

Recently, Sick's 3D vision product Ruler series has been newly upgraded! The new products Ruler3002, Ruler3004 and Ruler3010 are officially available today! 　　01. Product characteristics • Contour point upgrade: up to 3200 Data points/Profile • Ultra-high scanning speed ...