The KUKA robot replaces the battery

The manual movement method of industrial robots is mainly divided into four control methods: point control method, continuous track control method, force (torque) control method and intelligent control method. 1. Point Control Method (PTP) This manipulation ...

1. Number of robot axes. The number of axes of the robot affects the degree of freedom, if it is for a simple straight to go occasion, for example, a belt line from one side to the other, choose a simple four-axis robot; If the robot does not have much room to move, but the demand machine ...

(1) Teach: P6, P7, P8, P9, HOME Refer to P4 and teach P6 with LIN command: P3, P2 and Pl respectively, and teach P7, P8 and pg with PTP command; Return to the HOME point with the PTP command as shown, the end of the machine ...

The main effect of the KUKA welding robot servo motor is to convert the signal (control voltage or phase) into mechanical displacement, in the production and use of KUKA robot has the characteristics of high precision, good low frequency characteristics, high additional speed, short speed response time, etc., therefore, the KUKA robot servo electric ...

(1) Open the program Open the newly created program file banyunl" and enter the program editor. There are 4 lines of program in the program editor, in between, INI: initialization, END: program completion, and the middle two lines return to the HOME point. (2) Teaching: return to the HOME point Use...

Before the first operation of an industrial robot, it is necessary to carry out a review to ensure that the equipment and equipment are flawless and functional, can operate safely and identify faults. It is necessary for us to abide by the labor protection regulations of the country and region where we are located to check, and it is also necessary to test all safety ...

1. Working space and carrying capacity: 1. The standard length of a single root of Cartesian coordinate type is 6m, and it can reach 100m after assembly; Combined into a gantry robot, its working space can be a very three-dimensional space. A single root can carry 10-200 kg, and the special structure can reach 2400 kg. ...

First, welding robot inspection and protection 1. Wire feeding arrangement. Including whether the wire feeding force is normal, whether the wire feeding tube is damaged, and whether there is an abnormal alarm. 2. Is the airflow normal? 3. Is the torch safety protection system normal? (It is forbidden to close the welding torch safety protection ...

One: The switch jumps often and may not be able to close? 1. Aging of switches 2. The switch selection is incorrect 3. The pump is stuck or the motor is short-circuited 4. The line is aging, short circuit, and the line is too small or lacks phase. Solution: Turn off the power of the control system...

　　1. The boot coordinate system is invalid The international coordinate system is based on the gun head, in this coordinate system, all the actions of the robot are completed in accordance with the gun head as the vertex to complete the movement, the XYZ direction to cut the gun direction does not change, if the machine ...

Industrial robot teaching is that the programmer selects various teaching methods to "inform" the robot in advance of the action information and operation information. This information is roughly divided into three categories: robot orientation and posture information, trajectory and waypoint information; Robot mission action order letter etc.

1. Place the nut Clamp the quad or hex nut and place it in the fixture 2. Thread sizing Grab the screw and assist it to complete the "180-degree turn" action; Apply an appropriate amount of sealant to the thread on its underside ...

If the initial adjustment is lost (e.g. after a motor change or bump), the initial adjustment is restored. Since the learned error persists even after the adjustment is lost, the KUKA robot is able to calculate the initial adjustment. Before checking an axis, it is necessary to complete the ...

1. The robot pipeline includes cable harnesses, robot SMB lines, robot communication lines and robot connection lines as communication, power supply cables and optical fibers. The product has excellent properties such as high heat resistance, oil resistance, bending resistance, impact resistance, and insulation. ...

1. It is necessary to conduct teaching assignments Before the robot performs active welding, it is necessary for the operator to teach the robot the track of the welding gun and set the welding conditions. Because it is necessary to teach, the robot does not weld to a wide range of products produced in a small number of products. 2. There must be ...

1: KUKA Robot Teach Pendant Bad Contact or Partial Ineffective (Replacement Contact Panel) 2: KUKA Robot Teach Pendant does not appear (repair or replace the internal motherboard or LCD screen) 3: KUKA Robot ...

l. When planners plan circuit boards, there are unreasonable local planning that are most likely to present problems. 2. The components frequently used in the circuit board are prone to problems. The drive motor and rotating shaft of the industrial circuit board, the switch tube of the switching power supply, the common keys of the operation panel and other components ...

How do I set up a network connection for my Kuka robot? No matter what method you choose to set up your network connection, the first few steps are the same, so how do we do it? 1. Fulfill the X-start ...

1) Rapidity. The time from obtaining the command signal to the completion of the required working state of the motor should be short. The shorter the time to respond to the command signal, the higher the sensitivity of the electric servo system, and the better the fast response function.

The control method of KUKA robot teach pendant is the most used industrial robot on the market at present, and it is also the most perfect one, KUKA type robot can be widely used, the maintenance of KUKA robot teach pendant, thanks to its multiple control methods, according to the work task of ...