Steps to disassemble a DC motor – Yamaha

First of all, test the motor first, any circuit does not have to be connected, any two of the three wires of the motor are short-circuited together, roll the motor shaft by hand, and feel that there is resistance, then OK. 2. Connect the servo drive to the power supply according to the drawings (for example, if a voltage regulator is used, adjust from 100V to 220V ...)

1. The operation is slightly inferior to people Because of the complexity of managing the structure of robots, employees who use industrial robots require professional training. If not done correctly, even a simple operation can lead to serious safety incidents. On the other hand, it's easier to do some of the curiosity processes manually ...

Industrial robots are the products of the organic combination of machinery and computer programs, which can not only save labor, but also have the advantages of sensitivity and precision, fast and efficient, and stable system. There are always some aspects that need to be paid attention to when developing high-performance industrial robots.

1 The way the earth tosses and turns A reducer is a device that drives an output shaft with a high-speed input, and it is usually designed as a large gear in a geometry with the same number of teeth as the number of input gears. The principle of movement of gears can be simply ...

The Yamaha gasoline generator is a machine that converts chemical energy into mechanical energy, and its conversion process is actually the process of the work cycle, simply put, by incinerating the fuel in the cylinder, kinetic energy is generated, and the piston in the engine cylinder is driven to reciprocate, which drives the piston connected to the piston ...

Industrial robots are multi-joint manipulators or multi-degree-of-freedom machines and equipment for the industrial category, which can actively perform work and complete various functions by relying on their own power and control capabilities. It can accept human command, or it can operate according to pre-programmed programs, and modern industrial robots can also ...

1. There is no signal when the photoelectric switch is in place. Solution: Check whether the transmitter and receiver of the photoelectric switch are aligned, whether the photoelectric reflective switch and the reflector plate are aligned, whether the interval between the positive reflection switch and the object under investigation is appropriate, and whether there is a foreign object obstruction. Photoelectric Switches: View Connections ...

The drive source of the industrial robot drives the movement or rotation of the joints through the transmission parts, and then completes the movement of the body, arms and wrists. Therefore, transmission components are important components of industrial robots. According to different transmission types, transmission components can be divided into linear transmission organization and rotary transmission group.

1. Air-spraying robot Air spraying robot is also known as low-pressure air spraying, spraying machine relies on low-pressure air to make the paint after spraying out of the muzzle to form an atomized air flow to act on the surface of the object (wall or wood surface), air spraying compared to the hand brush has no brush marks, and the plane is relatively uniform.

The zero point of the robot is the initial orientation of the robot operation model, and the zero point has been set for each robot when it leaves the factory. When the zero point is incorrect, the robot cannot move correctly, and the zero point needs to be calibrated from scratch. ...

Welding robot is a modern and automated equipment that integrates knowledge of machinery, computers, electronics, sensors, artificial intelligence and other aspects. Welding robots are mainly composed of two parts: robots and welding equipment. The robot consists of the robot itself and the control system. Welding Equipment ...

In the production process of lithium batteries, the products should be automatically removed from the production line, sent to the testing place for visual inspection by the intelligent image processing system, and then the qualified products are sent to a specific packaging container, and the unqualified products are sent to another container. This is the largest battery in Europe ...

Some of the new cobots are planned to be user-friendly and easy to program, and then do not require an engineer to execute. Some even have manual guidance, where cobots are able to learn by example and together be guided through a series of actions required to complete their programming mission. ...

Two automation systems are the customer's first choice for goods/pallet movements: Automated Guided Vehicles (AGVs) and Autonomous Mobile Robots (AMRs). AGVs have been around for a long time, and over time, their capabilities and skills have improved dramatically, and AMRs are gaining traction. ...

Complete product inspection, touch screen reviewer Functional testing of completed products. Development software reviews. Button PUSH quality check. S robotic arm length 120mm-1200mm industry** product series, can ...

First, the components of the robot At the most basic level, the human body consists of five main components: Of course, there are also intangible traits of human beings, such as intelligence and morality, but on a purely physical level, this ...

Yamaha robots are commonly used in a variety of industrial sectors, including: Car manufacturing: used in welding, painting, testing and other processes on the car production line. Medical devices: used in the production of medical devices and instruments, such as surgical instruments and nursing products. Food & Drink: ...

This article describes the control strategy of using a Siemens PLC to control a Yamaha robot, using an external IO port to set the command word, so that the PLC can communicate with the robot and instruct the robot to complete the corresponding action. Siemens S7-300PLC is a widely used large and medium-sized PLC in China.

Yamaha Motor Intelligent Machine (Gusu) Co., Ltd. (hereinafter referred to as "YIMS") has further integrated the semiconductor-related equipment business in addition to the existing SMT (placement machine) and FA (industrial automation) business. In order to improve the work infrastructure and improve the customer experience ...

1. The control type of the robot can be divided into open-loop control and closed-loop control according to whether there is a reaction or not, during which open-loop control is generally considered to be more accurate, but the requirements are more chaotic. Generally speaking, if we want to accomplish open-loop accurate manipulation, we need to know the accurate model of the controlled target ...