The KUKA AMR KMP 1500 is an omnidirectional mobile channel capable of moving autonomously and sensitively within space. Combined with the new generation of KUKA Sunrise control systems, it offers modular, widely used mobile production plans for the industry of the future.
KMP 1500: Solutions for sensitive production processes
In response to the ever-increasing production requirements of shorter reaction times and greater sensitivity in production planning, we offer the KUKA KMP 1500 as a solution. In the factory of the future, pre-defined paths and rigid processes are a thing of the past. As a result, KUKA has developed autonomous intelligent vehicles that supply data to robots and machines simultaneously. The KMP 1500 makes production incredibly agile in the past.
The KMP 1500 is an autonomous and controlled channel that is more ideally involved in the production process. In addition, the vehicle is particularly suitable for lattice welding. The KMP 1500 transports products autonomously and completely.
In this way, KUKA offers you a production plan that you can use to optimize your logistics. The KMP 1500 supports you in your warehouse or between production processes in a cost-effective way – only when you need it.
The mobile channel used as an unmanned transport vehicle is equipped with a lifting organization that allows for omnidirectional autonomous movement indoors.
KUKA robots grind oversized plastic tubes
The KMP 1500 meets all the safety requirements for driverless transport vehicles and offers a very high load capacity without sacrificing maximum safety.
KUKA Mobile Channel 1500: Your benefits
With the KMP 1500, you can rely on an omni-directional mobile channel that meets the automation requirements of Industry 4.0:
Mobile, unconstrained
The KMP 1500 is equipped with KUKA omniMove drive technology, which enables it to move in an arbitrary direction from a standstill in an instant. This sophisticated wheel technology enables positioning accuracy of +/- 5 mm in confined spaces. The result is a solution for logistics automation with higher precision that saves space.
Transferring a body weighing up to 1500 kg was a no-brainer for the KMP 1500.
Autonomous and sensitive warehouse handling
The KMP 1500 takes out the desired workpiece autonomously or puts the machined workpiece back in the warehouse. It uses the KUKA Navigation Solution, which allows it to move freely through the room without traditional orientation controls or navigation elements. This facilitates integration into the context of changes and then improves the economics of logistics.
High load capacity, safety and reliability
With a load capacity of up to 1,500 kg, the KMP 1500 is able to safely move your products throughout the entire production process. It complies with all necessary safety regulations and is even more sensitive. The built-in safety laser scanner enables autonomous navigation during production.
KMP 1500: The next step in the automation of production systems
The fundamental module of the KMP 1500 is the mobile channel. It has a number of features that make it an excellent solution for agile production processes:
Features for safety: four emergency stop switches, direction indication flashing, LED signal lights as well as two laser scanners and safety and positive warning sensors for 360-degree monitoring
Energy & Power: Lithium-ion rechargeable battery pack with 54 Ah, *** three hours of short use, capable of being recharged via wire or cradle charger
Wireless interface: capable of wireless equipment and programming, remote control
Hardware components: body, KUKA motor, solid shaft, rocker axle, transmission connected to the wheel system
KUKA Navigation Solution Basic: This sophisticated navigation system enables mobile channels to move autonomously through rooms – without the risk of bumps and artificial symbols.
KUKA Sunrise.OS: The built-in KUKA Sunrise.OS control system contains all the interfaces needed to standardize the robot and is easy to disassemble.
KUKA Mecanum wheels: KUKA omniMove drive technology based on Mecanum wheels allows the KMP 1500 to move in a free direction and ensures that the KMP 1500 can navigate to the desired position even in tight spaces.
KMP 1500: Optional component
The KMP 1500 is available in a modular design for a wide range of applications and can be extended with additional functions. The following feature options are available:
Electronic lifting system
Bottom contact piece for charging
Alltrac chargers
Wireless remote control
Expands to a 106 Ah lithium-ion battery with a minimum of eight hours of use
|
More on that
|
Routine maintenance of KUKA robot cables
In a sense, the wire and cable production profession is a profession of data finishing and assembly. - The amount of data used is huge, and the data cost in cable products accounts for 80-90% of the total production cost; Second, there are many types and varieties of materials used, and the functional requirements are particularly high.
|
|
Zero-point calibration of KUKA robots
The intent of mechanical zeroing is to make the robot's electrical zero point (encoder zero point) coincide with the mechanical zero point.
Friends who know CNC machine tools know that the first reference point (zero point) for the engine bed with incremental encoder is the point. Industry...
|
|
KUKA robot reducer maintenance method
The gear unit is a very important component of KUKA robot equipment. It has very important features and benefits. The main purpose is to support the mechanical rotating body and reduce the mechanical rotating body. The coefficient of friction is increased, the rotation accuracy is higher, and the service life of the machinery and equipment is longer. So how daily ...
|
|
KUKA robot handling program programming
(1) Open the program
Open the newly created program file banyunl" and enter the program editor. There are 4 lines of program in the program editor, in between, INI: initialization, END: program completion, and the middle two lines return to the HOME point.
(2) Teaching: return to the HOME point
Use...
|
|
The difference between KUKA robot electrical welding and gas shielded welding
Second, welding is a common name for "carbon dioxide gas maintenance welding", and argon maintenance welding (commonly known as "argon arc welding") and other gas maintenance welding are called "gas maintenance welding".
The advantage of the second protection welding is that it is open arc welding, which is easy to achieve all-round semi-...
|
|
Application range of visual positioning system for industrial robots - KUKA
The industrial visual positioning system provides accurate operation direction and posture guidance for industrial robots for transfer, sorting, palletizing, installation and other missions, which is suitable for common policy types and different use needs, including 2D plane positioning (3 degrees of freedom), 2.5D positioning (4 degrees of freedom) and 3D spatial positioning.
|
|
Classification of KUKA robot models and types
General industrial robots are classified according to centralized standards:
1. Classification according to the number of axes. according to
2. Classification according to the application scenario. For example: welding, palletizing, etc.
Let's talk about KUKA machine in the early years ...
|
|
Analysis of the abnormal noise of the KUKA robot reducer
Planning reasons and countermeasures
1. Japan RV reducer internal gear accuracy level planning Japan RV reducer planners often consider economic factors as much as possible to confirm the gear accuracy level negligence accuracy level is the gear noise and backlash mark. United States Gear Manufacturers Association ...
|
|
Safety prompt for the KUKA robot to change the motion command
After each change to the motion command, the robot program must be tested at low speed (run method T1).
Immediately starting a robot program at high speed can cause damage to the robot system and the entire equipment, as unpredictable movements may occur. If someone sits dangerously ...
|
|
What are the programming instructions for KUKA robots?
When programming the KUKA robot, the input and output signals that indicate the logic instructions are used.
(1) OUT - Closes the output in a certain direction in the program
(2) WAIT FOR - Signal-related waiting function ...
|
|
Variables and instructions related to the operation of external axes – KUKA robots
Switching the axes of the external kuka robot to the bit arrangement in an asynchronous form means switching the synchronous and asynchronous forms of the external axes
Program example: $ ASYNC_AXIS='b1000'
Indicates the outer axis 1, 2, 3, 4 from right to left. The example above shows that an external welding robot ...
|
|
The status quo of flexible production of cobots – KUKA robots
The efficient and flexible production of a wide range of batches is seen as a challenge for future production. Overcoming this challenge requires the perfect coordination between man and machine.
In today's modern factories, there are already a lot of automation ...
|
|
Procedure for TCP correction of KUKA robots
1. In the main menu, select the > Measure > Thing > XYZ 4 points.
2. Give a number and a name for the thing to be measured. I admit it with a persistent key.
3. Use TCP to move to a reference point at will. Click Measure. Click Yes to reply to the security question ...
|
|
KUKA robot architecture
Robot architecture refers to the structural method of information processing and manipulation logic of one or several robots that specify the guidelines for completion.
1. Differentiation according to function
According to the architecture of functional differentiation in artificial intelligence, it is attributed to traditional deliberative intelligence in artificial intelligence.
|
|
The manual movement of industrial robots – KUKA robots
The manual movement method of industrial robots is mainly divided into four control methods: point control method, continuous track control method, force (torque) control method and intelligent control method.
1. Point Control Method (PTP)
This manipulation ...
|
|
A brief introduction to the KUKA handling robot
In today's society, with the rapid development of e-commerce, people's demand for goods is growing, and the requirements for product quality are getting higher and higher. Among them, KUKA handling robots are particularly popular in the packaging industry.
|
|
Troubleshooting KUKA robots
How can I troubleshoot KUKA robots simply?
KUKA robots work on the same principle of reciprocating work, and a good robot requires the combination of hardware and software to achieve the desired working results. For example, self-learning memory programming, etc., obstacle automatic detection bypass function, ...
|
|
Frequently asked questions about KUKA robot motors
1. KUKA robot motor coil repair, leakage, burning, overcurrent, overvoltage, heating, hot starting, alarm, tripping, and weak work;
2. The servo motor is weak in magnetism repair work, and the low-speed (no-load) can be alarmed at high speed (operation);
3. The repair of the external shaft motor of the robot is encountered.
|
|
The main precautions for welding with KUKA robots
1. It is necessary to conduct teaching assignments
Before the robot performs active welding, it is necessary for the operator to teach the robot the track of the welding gun and set the welding conditions.
Because it is necessary to teach, the robot does not weld to a wide range of products produced in a small number of products.
2. There must be ...
|
|
A detailed explanation of the TCP points of KUKA industrial robots
In order to depict the composition of the rigid body in space, it is necessary to attach the coordinate system of the target, and then confirm the composition of the coordinate system (origin orientation and the sentiment of the three coordinate axes), that is, 6 degrees of freedom are required to adequately depict the posture of the rigid body [1]. For industrial robots, something needs to be installed on a normal board ...
|
|
Contact
working hours
