New Arrivals | Sick DLS40 incremental encoder

1. Wiring There are 4 outgoing wires of the sensor, among them, the red or brown wire is connected to the positive power supply, and the black wire is connected to the negative power supply; The green or blue wire is the dark output line, and the white or yellow wire is the bright output line, the user can choose one of them according to his needs, and the other is not used, but it should be insulated. The lines are not ...

Transmitter: An oscillator (usually ceramic, about 15 mm in diameter) vibrates to generate ultrasonic waves and radiate them into the air. Receiver: When the oscillator receives the ultrasonic wave, it generates the corresponding mechanical vibration according to the ultrasonic wave and converts it into electrical energy as the output of the receiver. ...

Advantages of thermistor temperature sensors: 1. Thermistors are highly sensitive and can easily detect temperature changes. 2. Most models can respond quickly to temperature changes, which can be completed in a few seconds. 3. The technology is mature, the cost is low, and the user ...

(1) Automatic calibration: When the workpiece enters the sensitive area of the probe, press and hold the "SET" button for 3 seconds, and the sensitivity value will be set and displayed in green. (2) Two-point calibration: When the workpiece does not enter the sensitive area, hold and hold the "SET" button for three seconds, there is a ...

The OD2000 is an excellent multi-range sensor with a laser displacement sensor measuring within 1,200 mm with high accuracy. Technology based on the principle of laser triangulation, as well as the versatility of the measuring range, make it suitable for many different industry applications. 　　OD2000 multi-range not only solves the problem of electric ...

How the color mark sensor works The color mark sensor is actually a reverse installation, the light source is perpendicular to the target object device, and the bearer is biased towards the device at an acute angle to the object, so that it only detects the scattered light from the target object, and then prevents the sensor from directly bearing the reflected light, and can make ...

Preparation tools: calibrator to change the distance of the ultrasonic sensor, special regulator and special power supply. Disconnect the power supply: Disconnect the ultrasonic sensor from the controller and prepare it for commissioning. Commissioning time: The commissioning time can be adjusted to any time to meet the needs of personalization.

Photoelectric sensors are controlled by converting changes in light intensity into changes in electrical signals. Photoelectric sensors are generally composed of three parts: light source, optical path and optoelectronic components. The measured change is converted into a change in the optical signal, and then the optoelectronic component is used to further ...

1. Be sure to check whether the power supply used is in line with DC12-24V±10%, and the maximum is not more than 40V, otherwise the photoelectric switch may be damaged. 2. In order to ensure high stability detection, it is necessary to ensure that two points are achieved: first, the detection distance meets the specified rated detection distance, such as the detection distance is 12±2mm ...

In our daily lives, we can easily see a large number of 1D and 2D codes everywhere, and such visual barcodes have become one of the main applications of track and trace technology in various modern automation applications. With the iteration of technology updates, more and more ...

1. There are 4 wires for the wiring sensor, among them, the red or brown wire is connected to the positive power supply, and the black wire is connected to the negative power supply; The green or blue wire is the dark output line, and the white or yellow wire is the bright output line, the user can choose one of them according to his needs, and the other is not used, but it should be insulated. Lines are not allowed ...

1. At present, SICK pressure sensors can be used in combination with computers and instruments to improve operation and reduce errors. The human-machine dialogue function is the main feature of SICK pressure sensors, and the display device and input keyboard equipped with it become the medium for human-machine dialogue. 2. SICK pressure sensing ...

1. Set to "Surface" to measure the distance from the first surface within the sensor's detection range. This setting is available for all sensor heads. 2. Set to Glass Thickness to measure the distance from the front to the back of a transparent object, such as glass. This means that it has been measured with the sensing ...

1. The pressure receiver transmitter cannot return to the zero position The output of the SICK sensor does not change, and the output of the repressurized transmitter changes suddenly. Once the sensor is tightened, the sealing ring is compressed to the sensor pressure port to block the sensor. When pressure is applied, the pressure medium cannot ...

Depending on the way of transmission, infrared sensors can be divided into two types: active and passive. 1. Active infrared sensor The transmitter of the active infrared sensor emits a modulated infrared beam, which is received by the infrared receiver, thus forming a warning beam composed of an infrared beam ...

1. Self-regulation. At the beginning of use, please check whether the switch itself is defective and whether the appearance is defective. 2. When avoiding obstructions. When the photoelectric switch is used, for some goods such as colored goods, goods with weak reflectivity, and goods with large gaps between small pieces...

Photoelectric sensors A photoelectric sensor is a device that converts an optical signal into an electrical signal. Its working principle is based on the photoelectric effect. The photoelectric effect refers to the phenomenon that when light hits some substance, the electrons of the substance absorb the energy of the photons, and the corresponding electrical effect occurs. According to the photoelectric effect ...

What are the applications of color sensors? 1. Discrete photodiode with color filter The traditional color sensing method uses a structure in which three to four photodiodes are combined on a single chip, and red, green, and blue filters are placed on the surface of the photodiodes. An independent ...

1. Piezoelectric pressure sensor Based on the piezoelectric effect, electrical components and other machinery are used to convert the pressure to be measured into electricity, and then perform related measurement work. Piezoelectric sensors can only be used for dynamic measurements. Host...

In the current era of rapid economic development, logistics is known as the "blood" of the national economy, although the early Chinese logistics industry started late, with the continuous improvement of the system, the rapid development of high and new technology, now the logistics industry has become a social and economic bridge and link. Among them, the data flow is ...