Sick Sensors – The system composition of ultrasonic sensors

Magnetostrictive technology and magnetostrictive encoders are increasingly used in linear motion measurement in various industrial equipment due to their wear-free, maintenance-free, and reliable absolute position detection. Condition-based diagnostics and predictive maintenance enable efficient production, where the intelligent functions of sensors are increasingly ...

1. Application of photoelectric sensor in high-voltage and high-current testing In recent years, the use of optical equipment for high-voltage and high-current measurement has developed rapidly in the power system, and many new photoelectric sensor systems have been put into on-site operation, bringing many convenient measures for the monitoring of high-voltage and high-current.

Its robustness extends its service life High flexibility, shortened probes and interchangeable connectors Cost-effective with a wide range of output signals: The same system can be used for spot and continuous level measurement Commissioning is simple, calibration and maintenance is required Cancel the measurement ...

1. If the electronic ruler has been used for a long time, and the seal has been aged, and there are many impurities mixed with it, and the water mixture and oil will seriously affect the contact resistance of the brush, which will make the displayed numbers keep jumping. At this time, it can be said that the electronic ...

Capacitance – As the name suggests, these sensors work by recording changes in capacitance, which is a function of charge and voltage between two surfaces with an air gap or other material known as the dielectric constant. When the object to be measured enters the sensor field, it has an impact on the medium.

1. The pressure goes up, the output of the transmitter does not go up to this situation, you should first check whether the pressure interface is leaking or blocked, if you admit that it is not, check the wiring method and check the power supply, if the power supply is normal, then simply pressurize to see if the output changes, maybe observe whether the zero position of the sensor has an output, if there is no ...

Main applications: Ultrasonic sensing technology is used in different aspects of production practice, and medical application is one of its most important applications. The application of ultrasound in medicine is mainly to diagnose diseases, and it has become a clinical...

Principle: Contrast sensors are often used to detect spots on specific color marks or objects, and they are used to detect color marks by comparing them to non-color mark areas, rather than directly measuring color. The color mark sensor is actually a reverse device, where the light source is mounted perpendicular to the target object, and the receiver is connected to the ...

1) Long-distance measurement, in the case of no reflector and low reflectivity, it can measure a long distance; 2) There is a synchronous input terminal, which can be measured synchronously by multiple sensors; 3) Wide measurement range and short response time; 4) Compact design, easy to install, easy to operate ...

According to the measurement method, it can be divided into contact type and non-contact type 1。 The detection part of the contact: the contact temperature sensor is in good contact with the measured object, also known as the thermometer The thermometer achieves thermal equilibrium by conduction or convection, so that the indicated value of the thermometer can directly represent the ...

Visible red LED light source The sensor application of this light source is very common, the light spot is visible, the light spot is large, easy to align, easy to install and adjust, and the price is close to the people, which can meet most applications. The disadvantage is that the detection accuracy is not high. Red laser light source The light of the laser ...

As an expert in smart sensors, Sick has teamed up with SATO, a world-renowned manufacturer of printing and recognition solutions. Through the on-site practical application cases, not only the technical characteristics of SICK & SATO were demonstrated, but also the possibility of integrating barcode and RFID technology in the automated production line at the same time.

Recently, Sick's 3D vision product Ruler series has been newly upgraded! The new products Ruler3002, Ruler3004 and Ruler3010 are officially available today! 　　01. Product characteristics • Contour point upgrade: up to 3200 Data points/Profile • Ultra-high scanning speed ...

1. When the load exceeds the action current, the circuit will be automatically cut off. 2. After the circuit is automatically cut off, the panel indicator light is on, which is convenient for judging the fault part. 3. After troubleshooting, press the red button at the bottom of the panel to restore the normal power supply. 4. For other reasons, the shell ...

1. Self-regulation. At the beginning of use, please check whether the switch itself is defective and whether the appearance is defective. 2. When avoiding obstructions. When the photoelectric switch is used, for some goods such as colored goods, goods with weak reflectivity, and goods with large gaps between small pieces...

How the color mark sensor works The color mark sensor is actually a reverse installation, the light source is perpendicular to the target object device, and the bearer is biased towards the device at an acute angle to the object, so that it only detects the scattered light from the target object, and then prevents the sensor from directly bearing the reflected light, and can make ...

As a special sensor for the two-dimensional code positioning and navigation market, GLS621 is mainly used in warehousing AGVs or warehouse handling robots based on the principle of inertial two-dimensional code navigation.

Quality assurance through programmable imaging: RIBE Technik from Schwabach has developed an innovative bumper assembly system that includes an inspection system. Machine vision from SICK enables the identification of individual components and the monitoring of each operating process as a special system concept ...

1. Be sure to check whether the power supply used is in line with DC12-24V±10%, and the maximum is not more than 40V, otherwise the photoelectric switch may be damaged. 2. In order to ensure high stability detection, it is necessary to ensure that two points are achieved: first, the detection distance meets the specified rated detection distance, such as the detection distance is 12±2mm ...

Key Characteristics of SICK Sensors (Displacement Sensor Principle) Nominal resistance: The resistance indicated on the potentiometer. Promise error: The percentage of the ratio of the difference between the nominal resistance and the actual resistance to the nominal resistance is called the resistance error, which indicates the accuracy of the potentiometer. Promise...