Parameter settings for the Sigg distance sensor

1. Parking lot or conveyor and other places Its function is to detect the parking position, and the detection distance is relatively long, which is more applicable in parking lots and other occasions. 2. The position of the processed parts In the factory production process, in order to realize the automatic processing state of the parts, the position of the parts must be inspected.

Method 1: Put the color sensor on the white object, turn on the red filter, at this time the sensor will emit the frequency, count the emitted frequency, when the count reaches 255, there is a time, this time is recorded as T1. Turn on the green filter, at this point the sensor will ...

1. Linearity: refers to the degree to which the actual relationship curve between the output and input of the sensor deviates from the fitting straight line. Defined as the ratio of the maximum deviation between the actual characteristic curve and the fitted line over the full scale range to the full-scale output. 2. Sensitivity: Sensitivity is the sensor ...

1. There are 4 wires for the wiring sensor, among them, the red or brown wire is connected to the positive power supply, and the black wire is connected to the negative power supply; The green or blue wire is the dark output line, and the white or yellow wire is the bright output line, the user can choose one of them according to his needs, and the other is not used, but it should be insulated. Lines are not allowed ...

Resistance, inductance and capacitance are the three major types of passive components in electronic technology, and a capacitive sensor is a sensor that converts the measured change into a capacitance change, which is essentially a capacitor with variable parameters. Capacitive sensors offer the following advantages: (1) ...

1. Add a protective cover as much as possible, and clean up the chips and oil splashed on the ruler in time to strictly prevent any foreign matter from entering the inside of the grating ruler sensor housing. 2. When plugging and unplugging the grating displacement sensor and the plug holder of the digital display, the power should be turned off. 3. For the extension of the dust seal ...

1. Thermistor sensor temperature measurement Thermistor sensors used to measure temperature are generally simple in structure and inexpensive. Thermistors without an outer protective layer can only be used in dry places; Hermetically sealed thermistors are not afraid of moisture erosion and can be used in harsh rings.

1. The sensor should be handled gently, especially for the small range sensor with aluminum alloy material as the elastomer, any impact or drop caused by vibration is likely to cause a large output error. In addition, it is necessary to protect the sensor outlet head and not to break it 2. Design loading ...

A photosensor is a sensitive device that responds to or converts external light signals or light radiation. A photosensor is a sensor that uses a photosensitive element (photodiode) to convert an optical signal into an electrical signal. Their sensitive wavelengths are close to those of visible light, including infrared and ultraviolet wavelengths ...

1. The signal cable of the sensor should not be arranged in parallel with the strong current power line or control line (for example, do not place the sensor signal line in the same pipe as the strong power line and the control line). IF THEY MUST BE PLACED IN PARALLEL, THEN THE DISTANCE BETWEEN THEM SHOULD BE KEPT AT LEAST 50CM, AND THE SIGNAL ...

The logistics industry has always been a strong area of SICK, in response to the detection of various goods on different conveyor lines and the diverse needs of customers, SICK has launched a series of photoelectric sensors such as G6, Z18, W16, W26 and Ray26 - which can detect cartons, baskets, uneven appearance, transparent bottles, laminated bags, etc.

Friends who pay attention to Sick will not be unfamiliar with the W4-3 series products, this classic mini photoelectric is widely praised by the industry for its excellent set pressing function and diverse optical functions. Whether the object is a lubricated and reflective mobile phone surface, a wrinkled and dark food packaging bag, or ...

(1) Measure the clock signal and data signal of the displacement sensor of 4 hydraulic cylinders, the clock signal is about 2.8V DC and 0.123V AC; The data signals are all about 2.8V DC and 0.245V AC. From this, it can be judged that the PLC clock and MTS data bit transmission and reception pulse loops are normal ...

Thermal resistance is used to measure the temperature of a substance when its temperature changes, and its resistance also changes with the characteristics of the change. When the resistance value changes, the working instrument will display the temperature value corresponding to the resistance value. RTD sensors use the resistivity of conductors or semiconductors to change with temperature.

Today, with the development of intelligent logistics, have you ever encountered such a problem about unmanned AGV/AMR cars? SLAM navigation hardware is costly; high R&D expenses; LiDAR positioning and navigation may not be used in actual customer scenarios; In order to ensure efficiency, the speed of the trolley has a ...

1. In order to have sufficient heat exchange between the measuring end of the RTD and the medium to be measured, the location of the measuring point should be reasonably selected, and the installation of RTD near the valve, elbow, pipe and equipment should be avoided as much as possible. 2. The thermal resistance with a protective sleeve has heat transfer and heat dissipation loss, in order to reduce the ...

As we all know, incremental encoders are used to monitor rotational speed or position, and are widely used in all kinds of automated machinery. With the continuous development of the industrial control industry and the continuous change of product demand, SICK has launched a more cost-effective and cost-effective small incremental encoder market in the large and competitive small incremental encoder market.

Analysis of the factors that may cause the zero point change of the SICK sensor: overload will lead to a sudden change in the zero point, and the output resistance will obviously exceed the specified value impact, as above; Moisture return or turbidity, so it is mainly manifested as a continuous change of 0 point, high and low, etc., at this time, the ground resistance will be further reduced - in ...

Dynamic features: The so-called dynamic characteristics of the sensor refer to the characteristics of the output of the sensor when the input changes. In practice, the dynamic characteristics of a sensor are often expressed in terms of its response to some standard input signal. This is because the sensor's response to a standard input signal ...

1. Connect the device: connect the power supply and electrical signal to the sensor, connect the output interface to the PLC, connect RS232 to the computer, generally use RS232, but also change to other control methods, such as CAN, RS485 and so on. 2. Software installation: Open the laptop, install ...