Sick sensor – the difference between photoelectric sensor and infrared sensor

1. Basic composition The appearance of this series of fiber optic sensors is basically composed of the following parts, from left to right: (1) SET button, this button can be used for sensitivity setting. The basic principle of this sensor is: through the induction of the refractive index of different media by the fiber optic probe, ...

In the digitalization stage, the first step of the development path of Industry 4.0, Sick is committed to the design and development of intelligent sensors, aiming to lay a solid hardware foundation for digital transformation. Now, Sick has added a new member to the family of smart sensors – the magnetic corner sensor MAS. ...

On November 13, 2019, the "12th China Online Analytical Instrument Application and Development International Forum and Exhibition" jointly organized by the Analytical Instrument Branch of China Instrument Industry Association and the Analytical Instrument Branch of China Instrument and Control Society was grandly opened at Nanjing International Exhibition Center. As a full ...

1. Laser ranging sensor 2. Measuring distance range 0.5-300 meters, 3000 meters (to use reflector) 3. The accuracy error of the whole process is 20 mm 4. The continuous service life of the laser is more than 50,000 hours (5 years) 5. Standard RS232, RS422 ...

1. Measurement Sensors and sensor systems from SICK measure dimensions, oversights, volumes, distances, speeds, and filling levels and then ensure that the process runs smoothly. 2. Detection SICK sensors are able to detect the presence or absence of various objects as well as the quality of consumer products to the satisfaction of ...

It is a physical phenomenon in which light irradiates certain substances and changes the conductive properties of the substance, which can be divided into three categories: external photoelectric effect, internal photoelectric effect and photogenerated volt effect. The external photoelectric effect refers to the physical emission of electrons from the surface of an object under the action of light.

As an expert in smart sensors, Sick has teamed up with SATO, a world-renowned manufacturer of printing and recognition solutions. Through the on-site practical application cases, not only the technical characteristics of SICK & SATO were demonstrated, but also the possibility of integrating barcode and RFID technology in the automated production line at the same time.

With the rapid development of "Made in China" to "Made in China", intelligent equipment and other technologies have been widely used in various fields, among which the degree of intelligence in steel structure construction is also getting higher and higher. In the intelligent construction of steel structures, welding and spraying are indispensable process links, in which ...

Recently, Sick's 3D vision product Ruler series has been newly upgraded! The new products Ruler3002, Ruler3004 and Ruler3010 are officially available today! 　　01. Product characteristics • Contour point upgrade: up to 3200 Data points/Profile • Ultra-high scanning speed ...

1. The color sensor, also known as the color sensor, is a machine that compares the color of the object with the reference color that has been taught earlier to detect the color. The standard color measurement method is to use a spectrophotometric colorimeter to measure the tristimulus value of the sample, so as to obtain the color of the sample.

According to the measurement method, it can be divided into contact type and non-contact type 1。 The detection part of the contact: the contact temperature sensor is in good contact with the measured object, also known as the thermometer The thermometer achieves thermal equilibrium by conduction or convection, so that the indicated value of the thermometer can directly represent the ...

The OD2000 is an excellent multi-range sensor with a laser displacement sensor measuring within 1,200 mm with high accuracy. Technology based on the principle of laser triangulation, as well as the versatility of the measuring range, make it suitable for many different industry applications. 　　OD2000 multi-range not only solves the problem of electric ...

1. Thermocouples Thermocouples are voltage devices that indicate temperature measurement when voltage changes. As the temperature increases, the output voltage of the thermocouple increases – not necessarily linear. Thermocouples are typically located inside a metal or ceramic shield to protect them from exposure to a variety of environments. ...

(1) Automatic calibration: When the workpiece enters the sensitive area of the probe, hold down the "SET" button for 3 seconds, and the sensitivity value will be set and displayed in green. (2) Two-point calibration: When the workpiece does not enter the sensitive area, press and hold the "SET" button for three seconds.

In recent years, with the promotion of human-robot collaboration technology and concepts (with an average annual compound growth rate of more than 37%), the relationship between humans and robots has become more and more "intimate", constantly breaking the "barrier" and achieving "zero distance" contact. However, due to the lack of specifications and technical abuse, various accidents have occurred one after another.

How fork photoelectric sensors work: Placing an optical transmitter and a receiver facing each other on either side of a slot is a fork photoelectric. The luminaire emits infrared or visible light, and the light receiver receives the light in an unobstructed condition. But when the detected object passes through the trough ...

Overview Identification codes are easy and secure IDM's mobile handheld barcode scanner reliably recognizes 1D and 2D codes, including stacked codes such as PDF417. Depending on the field of application and environmental conditions, a standardized or rugged IP65 degree of protection can be provided.

With the strong addition of ZS36x8 series handheld guns, SICK's handheld barcode reading product line is becoming more and more perfect, from general to professional, from 1D code to QR code, and then from conventional label barcode to DPM direct marking barcode, we give more accurate handheld solutions for different application scenarios ...

With the continuous promotion of the dual carbon policy, a sustainable production and operation model is particularly important for manufacturing enterprises. The tire and rubber industry is also seeking a greener way of development. With the iterative improvement of the production process, the tire and rubber enterprises will also ...

With the rapid development of industrial automation in recent years, machine vision, as a smart brain endowed with "eyes" to machines, has been widely used in various fields of intelligent manufacturing. In the context of the rapid penetration of artificial intelligence in the Internet and emerging industries, traditional industries are also constantly promoting intelligent ...