Hollysys PLC - PLC is classified according to function

1. Scanning technology When the PLC is put into operation, its working process is generally divided into three stages, namely input sampling, user program execution and output refresh. The completion of these three phases is called a scan cycle. During the entire operation, the CPU of the PLC scans at a certain speed ...

1. Power off 2. Cleaning the ash can not only clean the surface, but also clean the internal card key of the controller 3. If there is a supporting UPS, open the UPS and clean the ashes 4. After cleaning the ash, check whether the card and relay are loose, and tighten them if they are loose 5. The relays with frequent actions should be cleaned regularly.

With the development of society, PLC programmable controller has been widely used in industrial production, but its maintenance and overhaul methods and skills, many engineers are not lawful, the following is to introduce the experience and skills of PLC use process. 1. PLC input and output A ...

Recently, Hollysys successfully signed a contract with Luxi Chemical Group Co., Ltd. (hereinafter referred to as Luxi Chemical) for a 1.2 million tons/year bisphenol A equipment project. The project is a key project in Shandong Province in 2021, which will not only greatly improve the competitiveness of Luxi Chemical polycarbonate in the industry, but also have a significant impact on China's phenol ...

Whether it is a new unit or an upgraded DCS, the equipment of the system and controller should focus on the reliability and load factor (including redundancy) objectives. The load rate planning of the communication bus must be controlled within a reasonable range, and the load rate of the controller should be balanced as much as possible.

(1) High reliability DCS is designed to be fault-tolerant, so that when a computer fails, it does not cause the system to lose other functions. In addition, because the tasks undertaken by the individual computers in the system are relatively simple, it is possible to adopt a specific structure and ...

1. The thermocouple uses a compensation wire, and there can be a node in the middle, but the corresponding compensation cable must be used to directly connect to the DCS thermocouple module, such as the LLMUX card in HONEYWELLTPS. Minimize nodes to reduce interference. In addition, in the DCS configuration, it is necessary to select the corresponding thermocouple model, and supplement the ...

1. The physical structure of the interface 1. RS232 interface: One of the computer communication interfaces, usually RS-232 interface in 9 pin (DB-9) or 25 pin (DB-25) form, generally there will be two sets of RS-232 interfaces on personal computers, respectively called COM ...

With the inclusion of "exploring the construction of digital twin cities" in the 14th Five-Year Plan, the field of intelligent transportation is being endowed with more new business value. Recently, Century Qualcomm and Hollysys reached a strategic cooperation, based on the principle of "giving full play to advantages, mutual promotion, long-term cooperation, mutual benefit and win-win", ...

1. Peripheral circuit component failure This type of failure often occurs in the failure of the PLC after a certain period of work. In the PLC control loop, if there is a component damage fault, the PLC control system will immediately and automatically stop working. The input circuit is a PLC that accepts switching quantities, analog ...

In order to further strengthen the comprehensive cooperation with Shaanxi Traffic Control Group, on August 11, 2022, Xu Yue, Chairman and Co-President of Hollysys Group, visited Zhang Wenqi, Secretary of the Party Committee and Chairman of Shaanxi Traffic Control Group, and the two sides conducted in-depth exchanges and cooperation on topics such as business ecology and smart highways.

According to the structural form of PLC, PLC can be divided into two categories: integral type and modular type. (1) Integral PLC The integral PLC is a centralized power, CPU, I/O interface and other components in a chassis, which has the characteristics of compact structure, small size and low price. Small PLC ...

1. It is used for switching control The ability of PLC to manipulate switching quantities is very strong. The number of points in and out of the control, less than a dozen points, dozens of points, more can be hundreds, thousands, or even tens of thousands of points, because it can be networked, the number of points is almost unlimited, no matter how many points can be controlled, the control ...

The "2023 China Automation + Digital Industry Annual Conference", "The 19th CAIMRS and Digital Leaders Forum" and the "Annual Award Ceremony" were successfully held in Suzhou. The theme of this summit is "Powerful Digital Intelligence, Junfa New Industry", combined with post-epidemic recovery, digital intelligence, and new industrialization.

Hangzhou Hollysys Automation Co., Ltd. (hereinafter referred to as Hanghe) and Jinan Iron and Steel Group International Engineering Technology Co., Ltd. (hereinafter referred to as Jinan Iron and Steel International) signed a strategic cooperation agreement in Jinan. Luan Yuandi, Deputy General Manager of Jinan Iron and Steel International, Sun Jiaying, Director of the Automation Division, and Liu Xinjie, Director of the Automation Office...

LK is a programmable controller (PLC) product launched by Hollysys for medium and high-performance control fields. It fully integrates the advantages of DCS and PLC, adopts high-performance analog processing technology, miniaturized structural design, open industry standards, and a universal system platform, so that ...

1. The function of PLC PLC is a general industrial automatic control device with microprocessor as the core, integrating computer technology, automatic control technology and communication technology, which has high reliability, small size, strong function, simple program design, flexible and universal and maintenance methods.

On October 18, 2022, the China Intelligent Transportation Association released the list of winners of the "2022 China Intelligent Transportation Association Science and Technology Award", which includes the Science and Technology Progress Award, the Technology Invention Award, and the Outstanding Innovative Talent Award. Among them, Beijing Hollysys System Engineering Co., Ltd. ...

On March 15, the 2023 China Petroleum and Chemical Industry Digital Transformation and Intelligent Development Conference was held in Tai'an, Shandong. The conference aims to strengthen the construction of "intelligent oil and gas fields, intelligent petrochemicals, intelligent chemicals and intelligent oil and gas pipeline networks", and lead China's petroleum and chemical industry to achieve intelligent transformation.

On September 20, 2022, Berlin time, the 13th Germany Berlin International Rail Transit Exhibition (InnoTrans 2022) opened at the Berlin International Exhibition Center in Germany. Following the 2018 exhibition, Hollysys once again appeared at the Berlin International Railway Exhibition (hereinafter referred to as the Berlin Exhibition) ...