Recently, Hollysys successfully signed a contract with Luxi Chemical Group Co., Ltd. (hereinafter referred to as Luxi Chemical) for a 1.2 million tons/year bisphenol A equipment project. This project is a key project in Shandong Province in 2021, which will not only greatly improve the competitiveness of Luxi Chemical polycarbonate in the industry, but also be of great significance to the development of phenol downstream products in China.
Bisphenol A, also known as diphenol propane, is an important organic chemical material, mainly used in the production of polycarbonate and epoxy resin chemical products, with the rapid growth of China's polycarbonate and epoxy resin in electronics, building materials, automobile industry, communications and computer and other fields, bisphenol A has become one of the key types of phenol downstream products in China, and its production site has extremely high requirements for the safety and stability of the control system.
Luxi Chemical, the owner of the project, is a large-scale state-owned enterprise controlled by Sinochem Group Co., Ltd., and has been recognized as "China's Chemical New Materials (Liaocheng) Industrial Park" and "China's Smart Chemical Park Pilot Demonstration Unit" by the National Petrochemical Federation, and is one of the "Top 30 Chemical Parks in China" and one of the skill innovation demonstration enterprises in China's chemical industry, and the first batch of chemical parks in Shandong Province.
As the first batch of preferred projects in the major project library of new and old kinetic energy conversion in Shandong Province, after the completion and operation of the 1.2 million tons/year bisphenol A equipment project of Luxi Chemical, it can provide stable materials for the existing polycarbonate equipment of Luxi Chemical, reduce the amount of purchases, reduce the transportation cost and safety hazards of material procurement, and improve the surplus ability. During the same period, a 600,000 tons/year caprolactam • nylon 6 project and a 240,000 tons/year ethylene downstream integration project will be built to further extend, supplement and strengthen the chain, expand the planning of advantageous products, and improve the competitiveness and inductive strength of Luxi Chemical.
Luxi Chemical's 1.2 million tons/year bisphenol A equipment project has many equipment, large planning, advanced technology and complex logic, with nearly 30,000 IO points and more than 1,000 SIS points in the DCS system alone, which has strict requirements for the safety, stability and reliability of DCS and SIS control systems. After many times of communication with customers, customized solutions that meet customer needs, after all, with detailed program design, "sincerely imagined for users" concept, first-class skill service platform, advanced and reliable product performance, after all, it stood out among many competitors at home and abroad and successfully won the bid.
This project is the first set of equipment of Hollysys DCS+SIS system in the bisphenol A project, and it is also the first achievement of Hollysys in the integration of automatic control system in the bisphenol A project, which fully reflects the technical strength and product talent of Hollysys in the chemical industry, marks another major breakthrough in the chemical industry, and further improves the market influence of Hollysys DCS and SIS systems in the chemical industry.
With advanced skills, high-performance products and high-quality services, Hollysys will help Luxi Group build a production base of high-end new chemical materials and chemical equipment, and further promote the localization and intelligence of China's chemical industry.
|
More on that
|
Hollysys DCS - Introduction to the hardware architecture of DCS distributed control system
DCS usually adopts a hierarchical and progressive structure, each level is composed of several subsystems, and each subsystem achieves a number of specific finite goals, forming a pyramid structure. Examining the hierarchical structure of DCS, DCS level and control management level are the two most basic links that make up DCS.
Process control...
|
|
Hollysys PLC - three forms of PLC output circuit
1. Relay output circuit
This type of output circuit form can be either DC or AC. The output circuit form of PLC relay allows the load to be generally below AC250V/50V, the load current can reach 2A, and the capacity can reach 80-100VA (voltage × current), so ...
|
|
Hollysys PLC - Introduction to the composition of PLC control cabinet
1. Open empty
A master air switch that is the power control for the entire cabinet.
2. Power supply
A 24VDC switching power supply.
3、PLC
This should be chosen according to the needs of the project. If the scale of the project is small, the integrated PLC can be used directly; If the item ...
|
|
Hollysys PLC - What are the selection methods of PLC?
1. Budget for input and output (I/O) points
When budgeting I/O points, the appropriate margin should be considered, usually based on the calculated number of input and output points, and then add 10%-20% of the expandable, and after the margin, it will be used as the budget data of input and output points. When ordering in practice, it is also necessary to rely on the manufacturer's ...
|
|
Hollysys DCS - What is DCS distributed control system?
DCS is the English abbreviation of distributed control system (Distributed Control System), distributed control system is referred to as DCS, which can also be literally translated as "distributed control system" or "distributed computer control system". The decentralized control system is based on the microprocessor, and the control function is decentralized.
|
|
Hollysys PLC - PLC maintenance and use skills
With the development of society, PLC programmable controller has been widely used in industrial production, but its maintenance and overhaul methods and skills, many engineers are not lawful, the following is to introduce the experience and skills of PLC use process.
1. PLC input and output
A ...
|
|
Hollysys PLC - what are the commonly used networking methods of PLC?
1 Universal serial port module
Based on the serial port communication module to realize the network connection, the network structure is shown in Figure 1, the form of computer link is adopted, the corresponding settings are carried out in the configuration software of the host computer, and the communication can be carried out with multiple PLCs without programming, and the FXlS of Mitsubishi ...
|
|
HollySys PLC - the usage and principle of PLC programming interrupts
When the PLC understands the interrupt function, it needs to understand the PLC's operating cycle or scan cycle. It is necessary to talk about the process of PLC sequential control loop execution, which is a prerequisite for understanding interruptions and must be mastered. It is divided into three parts, input processing, program processing, and output processing.
1、 ...
|
|
Hollysys DCS - DCS daily maintenance and fault analysis and troubleshooting methods
01. Power supply
The DCS power supply system is mostly a "dual backup hot redundant power supply", and the prevention and control of power failures is mainly reflected in the inspection and daily maintenance.
Generally speaking, as long as the unit is normal ...
|
|
Hollysys PLC - the six application functions of PLC
1. It is used for switching control
The ability of PLC to manipulate switching quantities is very strong. The number of points in and out of the control, less than a dozen points, dozens of points, more can be hundreds, thousands, or even tens of thousands of points, because it can be networked, the number of points is almost unlimited, no matter how many points can be controlled, the control ...
|
|
What are the three layers of the network structure of Hollysys DCS - DCS?
The bottom layer, the field control layer, that is, the field instrument and signal transmission, is mainly the collection of signals and the transmission of control signals. From field devices to control CPUs.
The middle layer, the system management layer, that is, the internal network layer of the DCS system, including the control station, the operation station, the historical server...
|
|
Hollysys PLC - Introduction to the working principle and operation mode of PLC controller
How a PLC controller works
1. Scanning technology
When the PLC is put into operation, its working process is generally divided into three stages, namely input sampling, user program execution and output refresh. The completion of these three phases is called a scan cycle. During the entire operation ...
|
|
Hollysys OCS industrial optical bus control system was successfully applied in Sinopec project
On November 13, 2022, Zhong'an United Coal Chemical Branch came with exciting news that the 20,000 tons/year butene-1 plant produced qualified butene-1 products at 22 o'clock on the same day, and the one-time start-up was successful. The control system of the device adopts the innovative technology product "OCS Industrial Optical Bus Control ...
|
|
Hollysys will make a blockbuster appearance at the first Shenzhen Nuclear Expo in 2022
From November 15th to 17th, the 2022 China Nuclear Energy High-Quality Development Conference and Shenzhen International Nuclear Energy Industry Innovation Expo (hereinafter referred to as the "2022 Shenzhen Nuclear Expo") will be grandly reopened at the Shenzhen World Convention and Exhibition Center.
The theme of this year's Nuclear Expo is "Nuclear Gathering in the Bay Area, Activating the World".
|
|
Hollysys PLC - Calculation of the amount of pulses in PLC
The control of pulse amount is mostly used for angle control, distance control, position control and so on of stepper motor and servo motor. The following is an example of a stepper motor to illustrate each control mode.
1. Angle control of stepper motor. First of all, it is necessary to clarify the number of subdivisions of the stepper motor, and then determine the stepper ...
|
|
The characteristics of Hollysys LK series PLC are introduced in detail
LK is a programmable controller (PLC) product launched by Hollysys for medium and high-performance control fields. It fully integrates the advantages of DCS and PLC, adopts high-performance analog processing technology, miniaturized structural design, open industry standards, and a universal system platform, so that ...
|
|
Hollysys PLC - PLC is classified by function
According to the different functions of PLC, PLC can be divided into three categories: low-grade, mid-range and high-end.
(1) Low-grade PLC
Low-grade PLC has basic functions such as logic operation, timing, counting, shifting, self-diagnosis, monitoring, etc., and can also have a small amount of analog input/output, arithmetic operation, math...
|
|
What are the functions of Hollysys PLC - PLC data acquisition gateway?
1. Rich networking and interface functions, easy to deploy
It supports 5G/4G/3G/WIFI/Ethernet, WAN/optical fiber and other network access modes, network port/serial port/IO port/CAN port and other equipment access, and supports LoRa wireless transmission, disconnection reconnection and multi-network mutual backup function.
2. Abundant ...
|
|
Hollysys was once again certified by the China Software Industry Association
Recently, identified by the Beijing Software and Information Service Industry Association, after a strict audit and evaluation process, in accordance with the relevant provisions of the national "Software Enterprise Evaluation Standards" and "Software Product Evaluation Standards", the China Software Industry Association announced the latest batch of "software enterprises" list, Beijing Heli ...
|
|
Hollysys DCS - Introduction to the hardware architecture of DCS
Examining the hierarchical structure of DCS, DCS level and control management level are the two most basic links that make up DCS.
The process control stage specifically realizes the decentralized control functions such as signal input, conversion, operation and output. The controls at the process control level vary in different DCS, ...
|
|
Contact
working hours
