Fisher/Fisher CAV4 valves

Flexible module design – The 3582 Series units can be upgraded to the Model 3582i Electro-Pneumatic Positioner in the field to replace the measurement module with the Model 582i Electro-Ptic Converter Assembly (1). The Type 582i electric-gas converter is attached to the housing of the positioner and provides a very economical ...

The 1301 series is a high-pressure pressure regulator used to supply air to instruments. It is equipped with a pressure gauge interface and can be equipped with a pressure gauge as an option. Connection size: NPS 1/4 Regulated pressure range: .0.69 to 34.5 bar/10 to 500 psig Maximum inlet pressure: 414bar/6000psig This article describes the fee ...

Low-noise steam pressure reducing valves controlled by multi-stage trim trims are used in boiler start-up and steam generation processes peculiarity Pressure-sealed bonnet. Low-maintenance gland filled with pure graphite (re-tightened). Polished stem. Hard-faced rails. Pressure-balanced spool. Hard-faced sealing surfaces. ...

Introduction: The Fisher/Fisher A11 High Performance Butterfly Valve is a reliable, high-performance butterfly valve for throttling and switching applications. Available in a pair of clamp or single flange designs to maintain tight shut-off over long periods of time, the valve is specific for a wide range of pressure and temperature conditions, including cryogenic applications.

Fisher 3610J Pneumatic Single Acting Valve Positioner with ET Control Valve 667 657 Pneumatic Actuator Type: Pneumatic, single-acting valve positioner specification Regional classification: Group II Class 2 gases and dusts are ATEX compliant, and Group II/Class 2 equipment is CUTR compliant Authentication:...

Fisher EH Series valves are designed for high-pressure applications. These valve constructions incorporate proven technology for higher capability in flow profile and greater reliability in valve interior design. peculiarity Improved cage design - drilled cage to provide excellent ...

Electric-pneumatic positioners Electric-pneumatic positioners are conventional pneumatic positioners with an additional integrated electric-pneumatic converter. The converter receives the DC analog input signal from the control system and converts it into the corresponding pneumatic signal, which is then sent to the conventional positioner. Almost every ...

The Fisher V280 is a three-piece, trunnion-style, full-bore control valve that handles all CL900 pressure drops. Optimized pressure, flow, and process control. An optional borehole silencer controls noise and vibration from high-pressure drop liquids and gases. The spline shaft is connected with the actuator, which reduces the ...

Introduction: The Fisher/Fisher easy-e cryogenic valve is a single-port ball valve with stainless steel construction and welded extension bonnet. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F).

Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

Introduction: The Fisher/Fisher Vee-Ball™ V150S flanged control valve has a hemispherical construction and is equipped with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

The Series 1805 pressure relief valve is ideal for farm faucet applications where a pressure relief valve is required between the primary and secondary regulators. The Series 1805 pressure relief valve is suitable for use with natural gas, air, propane, or any medium that is compatible with internal valve components. Relief ranges from 5 to 125 psig/0. ...

The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...

The Fisher DFA (Flexible Desuperheater) includes a water control element and a stand-alone desuperheater (with adjustable nozzles and mechanical atomization) for medium to high flow variation applications. The DFA is mounted to the NPS 8 or larger pipe end via a flange connection. specification Certified PED, C...

Turnkey valve operating system with pneumatic rack and pinion actuators, controls and mounting brackets. Function: Turnkey all-in-one actuator with control and mounting device specification Power source: Pneumatic Product Type: Pneumatic Actuator Actuation Valve ...

The Fisher easy-e EW series is designed for a wide range of applications commonly found in the oil and gas production industry. These valves meet the requirements of a wide range of applications, such as power stations where oversized pipes limit fluid flow rates. These valves are also suitable for applications where noise cancellation is required, e.g. in ...

The cryogenic valve is a straight-through, single-port valve with stainless steel construction and welded extension bonnet. The EWT-C valve is designed to be pressure balanced. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F). According to...

Introduction: The Fisher/Fisher DSA steam conditioning desuperheater uses high-pressure steam to rapidly and thoroughly atomize water jets in a low-flow steam line. The desuperheater is flanged to a pipe with DN 200 (NPS 8) or larger. This desuperheater is suitable for applications that require a high turndown ratio. ...

The Fisher Yarway 38/48 Standard Heavy Duty A.T.-Temp Desuperheater was developed specifically for medium/low pressure steam applications. specification Critical maintenance steam conditions Valve sizes NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN ...

Fisher dirt service trims are designed for dirt and cavitation applications. Cavitation is eliminated with a range of flow limits and extensions, allowing particles up to 19mm (3/4in) in diameter to pass through without clogging. Each trim stage has a sequentially increasing flow ...