Fisher/Fisher EZ ET Pneumatic Control Valve is supplied with DVC6200 DVC2000 valve positioner

Introduction: Fisher/Fisher FB welded angle valves control compressible fluids and can be used in special applications that require maximum noise reduction and high flow capacity. Typical applications include main steam pressure reducing valves and compressor bypass valves. FB valves are also commonly used in petrochemical and natural gas processing plants for acidic ...

The Fisher 4195K Gauge Pressure Indicator Controller displays process pressure and set point values on an easy-to-read process dial. These controllers compare the process pressure to the operator's adjusted set point and provide a pneumatic signal to the control element to change the process pressure toward the set point. ...

Fisher 3610J Pneumatic Single Acting Valve Positioner with ET Control Valve 667 657 Pneumatic Actuator Type: Pneumatic, single-acting valve positioner specification Regional classification: Group II Class 2 gases and dusts are ATEX compliant, and Group II/Class 2 equipment is CUTR compliant Authentication:...

The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...

Description: The Fisher/Fisher Model S402Y Pressure Regulator Direct Acting Reed Regulator provides economical pressure reduction control in corrosive environments in a variety of residential and small commercial applications. Typically, the Model S402Y is used to reduce the pressure of gas distribution to 4.5 in w.c. to 2.5 ps ...

The Series 1805 pressure relief valve is ideal for farm faucet applications where a pressure relief valve is required between the primary and secondary regulators. The Series 1805 pressure relief valve is suitable for use with natural gas, air, propane, or any medium that is compatible with internal valve components. Relief ranges from 5 to 125 psig/0. ...

The Fisher Model 63EG Pilot-Operated Pressure Relief Valve can be used in both liquid and gas applications. The 63EG is also suitable for throttling back pressure or bypass applications. Both main valves use quick-change spool packs for quick maintenance. For remote monitoring, the Model 63EG valve can be used with position monitoring.

The Fisher 2100 Switch-Type Pneumatic Switch and 2100E Electric Switch sense high and low levels. Typically, these switches pneumatically or electrically control the safety shut-off system of on-site processing equipment in oil and gas production applications. The 2100 and 2100E switches use float float sensors ...

The 63EG-98HM can be used in gas, liquid, or vapor applications. Suitable for applications up to 550°F / 288°C, Model 63EG-98HM utilizes high-temperature ethylene propylene diene diene monomer (EPDM) or perfluoroelastomer (FFKM) to provide Class VI shut-off. If used in corrosive conditions, the ...

　Introduction: The Fisher/Fisher Model R222H is a one-stage regulator that offers 65% higher flow and 40% smaller volume than standard compact regulators for use in underground tanks or airchambers where space is limited. Approved by Underwriters Laboratories (UL) (United States Safety Testing Laboratories Inc. ...

The Model R232A regulator is certified by Underwriters Laboratories (United States Safety Testing Laboratories, Inc.) for use in LPG systems. The regulator is designed to reduce tank pressure through an integrated two-stage system that provides an 11-inch water column of outlet pressure. For the people ...

The Fisher DMA/AF is a multi-shaped, mechanically atomized, backpressure-activated superheater interstage desuperheater. Designed for applications that require control of moderate load fluctuations and high thermal cycling. specification Certified PED, CRN Severe service steam conditioning Materials SA105, F22, F91 Job...

Introduction: Fisher/Fisher NotchFlo™ DST control valves are designed for use in dirty, cavitation applications. The trims in this valve utilize a range of flow restrictions and extensions to eliminate cavitation, allowing particles up to 12.7 mm (1/2 in) in diameter to pass through without clogging. ...

Introduction: The Fisher/Fisher Vee-Ball™ V150 Flanged Control Valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

The Fisher Model 585C actuator is typically equipped with a DVC6200 digital valve controller or a 360OP/P or I/P analog positioner. Can be used with a top-mounted or side-mounted manual handwheel (depending on the size of the actuator). Features: Produces up to 111 kN (25,000 lb ...

Introduction: Fisher/Fisher 67C Instrument Regulators Direct Acting Regulators and Filter Regulators are commonly used to deliver reduced, continuously controlled pressure to pneumatic and electropneumatic controllers and other instruments. These regulators are suitable for most air or gas applications. Other application packages ...

Application Flexibility—Actuators can be set either push-down open or push-down shut-off and can be installed anywhere in the four actuator/body mounting positions. Minimized dead zone—single joint connection plus splined pair clamp linkage reduces idling to low and improves control accuracy

Introduction: The Fisher/Fisher Model VS100 shut-off valve is designed to shut off the airflow to the downstream system when the outlet pressure exceeds a predetermined range. The body of the VS100 valve contains a movable valve bore in the bonnet and a shut-off valve called VSX4. 　　Features: ...

The Series 912 direct-acting, spring-loaded regulators are United States Safety Testing Laboratories Corporation (UL) certified regulators for use in a variety of applications and industrial applications. The valve membrane of these regulators has some internal pressure relief to help minimize overpressure. peculiarity ...