KUKA robot protective clothing is divided into a variety of types, different types have different functions, anti-static, dustproof, waterproof, etc. Here is a detailed introduction to the different types of robot protective clothing provided by Hongsheng Decheng, different characteristics and protective functions.
Dust-proof clothing: dust-proof, wear-resistant and high-strength, which can avoid dust entering, affecting the normal operation of the robot, avoiding water mist and oil pollution, and cannot enter the robot shaft joints and motors, which is conducive to repair and protection.
Robot anti-static clothing: anti-static and oil-proof, able to avoid paint pollution, avoid fire, blasting and other safety hazards. Protect the robot arm from erosion by spraying organic materials; Industry: automobile manufacturing, electronic processing and other industries.
Robot solder mask slag suit is also known as automatic welding
Clothing cover: It has the characteristics of high temperature radiation, dustproof, high temperature resistance, flame retardant, fire prevention and so on. It can effectively resist ultra-high temperature, welding slag and protect the robot's circuit.
Robot waterproof clothing: waterproof, high-pressure water to avoid pressure, can avoid fog, oil into the robot and internal motor shaft joints, to avoid not working, which is conducive to protection and maintenance.
Robot protective clothing is not only a kind of protective clothing, it is a good partner for robots, KUKA robot official website can be protected, robot protective clothing can also find a valuable place, has been waiting for the safety of robots.
Now in different enterprises, the original manual operation is replaced by robots, the power is improved, the accuracy is also improved, and the production cost is better controlled. Because the damage caused by the environment to the robot is too great, high temperature, welding slag, static electricity, and dust are all endangering the robot, in order to avoid the damage of these substances, we need the protection of robot protective clothing, and robots of various types and environments can have their own protective clothing.
In order to reduce the direct damage of the machine, the use of robot protective clothing is of course a must, so the customization of protective clothing is very common. In today's era of rapid technological development, people have walked a long way in the automation of the times. We can clearly see that the use of robot protective clothing can be described as many, so in the future use of robot protective clothing, it will only be added, but will not be reduced, of course, with the development of science and technology in our country, robot protective clothing will also change, will become more convenient, more intact protection, so many people are waiting for the future of protective clothing will be what posture.
|
More on that
|
The robot is running a jitter cause check – the KUKA robot
1. Is it that the load data you entered is incorrect?
If the load data is too high or too low, and the difference between the load and the practice load is too large, it will cause flutter!
2. Whether there is a large range of turning or posture changes in the running trajectory of the robot ...
|
|
How the KUKA robot is launched
1. Active operation method
When the KUKA robot is in active operation, it first selects the program that needs to be operated in the manual condition, and then switches the robot to self-power through the key switch, and then starts the robot operation program, so that the robot can reach the BCO safety reference point first, and then ...
|
|
Practical application area of parallel robots – KUKA robots
The parallel robot has no accumulated errors and high accuracy; The driving equipment can be placed on or close to the orientation of the fixed platform, so that the moving part is light in weight, high in speed and good in dynamic response; Compact structure, high stiffness, large bearing capacity; Small working space and other features.
...
|
|
Introduction to KUKA industrial robot control cabinets
Industrial robot manipulators generally have the main power supply, the power supply unit of the accounting machine, the control module of the accounting machine (the main part of the accounting machine), the input and output board (I/O board), the user connection port, the teaching pendant terminal (Flexpendant) interface, the accounting machine board of each axis, the drive unit of each axis, etc.
|
|
KUKA Small Robotics – KUKA Robots
Whether it's the agile four-axis SCARA or the nimble six-axis robot, these compact and space-saving KUKA robots are the most agile and robust in the series. You can combine a wide range of four- and six-axis KUKA robots in different sizes in your machine and keep the same ...
|
|
KUKA robot equipment is ready for inspection before operation
Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are in perfect condition, functional, safe and faulty. It is necessary to comply with the labor protection regulations of the country and region of the location, and it is also necessary to test all safety electrical ...
|
|
KUKA welding robot operation specifications
Routine safe operation and maintenance of KUKA welding robots.
KUKA welding robot operation I must go through professional training, master the use of system indicators and buttons, and be familiar with the most basic equipment knowledge, safety knowledge and precautions before being able to take up the post.
Before booting up KUKA ...
|
|
Welding attitude adjustment of KUKA arc welding robot
According to the application status and development needs of the welding technology of KUKA welding robots, the traditional welding methods must not be able to meet the production needs to a certain extent, and the arc welding robot technology has been paid more and more attention by manufacturers. How to complete the batch production of arc welding robots, is the current arc welding machine...
|
|
Introduction to the button indicator light of the control cabinet of industrial robots - KUKA robots
1. Schematic diagram of button indicator
2. Industrial robot QF1
This button is the power switch of the industrial robot control cabinet.
3. Power supply for industrial robots
The power indicator indicates the power of the industrial robot control cabinet.
|
|
KUKA robot MFC3+DSE card 00-117-336 is faulty
Fault 1: When loading a software component, the control system is stuck.
Cause: The MFC device cannot be initialized, MFC3 is not properly plugged in, and the PCI bus on the motherboard is faulty.
Solution: Remove the PC card, boot the PC, check the MFC3 slot, and replace the control system PC.
...
|
|
The KUKA robot adjusts the step for the first time
If the initial adjustment is lost (e.g. after a motor change or bump), the initial adjustment is restored. Since the learned error persists even after the adjustment is lost, the KUKA robot is able to calculate the initial adjustment. Before checking an axis, it is necessary to complete the ...
|
|
The KUKA robot initiates a timing step
1. In the T1 form, the user program is pierced into cell.src according to the control requirements, the Cell.src program is selected, and the robot operation mode is switched to ExT_ AUTO.
2. Under the condition that there is no error in the robot system, PLC-. Powering on, you have to announce Smove_ enable to the robot (to- ...
|
|
Obstacle avoidance control of the manipulator – KUKA robots
The kinematic redundancy of freedom of the manipulator means that the manipulator has more degrees of freedom than is required at the end of the manipulator. Kinematic manipulators with redundant degrees of freedom have better functions than manipulators with non-redundant degrees of freedom. For example, a manipulator with non-redundant degrees of freedom has obstacles in the external environment.
|
|
The difference between collaborative robots and traditional robots is KUKA robots
Collaborative robots are only a very important subcategory in the entire industrial chain of industrial robots, which has its best advantages, but the disadvantages are also obvious: in order to control the force and bump ability, the operation speed of collaborative robots is relatively slow, generally only one-third to one-half of traditional robots. ...
|
|
How KUKA Robot BCO works
1. The initial operation of the KUKA robot is called BCO operation.
BCO is an abbreviation for B lock coincidence. Coincidence means "consistency" and "convergence of time/space events".
BCO operations are to be carried out in the following cases.
|
|
KUKA robots add haptic functions to automatically recycle dust
On the 21st, KUKA Industrial Robot and its Chinese brand ambassador, table tennis athlete Tim · Bohr, participated in the 29th China International Rubber and Plastics Industry Exhibition. The relevant person in charge of KUKA said that the Foshan market is very potential, and the market prospect is very good.
|
|
The KUKA robot signal waits for timeout programming
|
|
The external axis of the KUKA robot operates variables and commands
Switching the axes of the external kuka robot to the bit arrangement in an asynchronous form means switching the synchronous and asynchronous forms of the external axes
Program example: $ ASYNC_AXIS='b1000'
Indicates the outer axis 1, 2, 3 from right to left ...
|
|
KUKA robot MFC3+DSE card 00-117-336 is faulty
Disadvantage 1: When loading software components, the control system is stuck.
Causes: The MFC device cannot be initialized, MFC3 is not properly plugged in, and the PCI bus on the motherboard is defective.
Solution: Remove the PC card, boot the PC, check the MFC3 slot, and replace the control system PC.
...
|
|
Mechanical structure of industrial robots - KUKA robots
From the perspective of mechanical structure, industrial robots can be divided into single-axis robots, coordinate robots, horizontal multi-joint robots (SCARA), straight multi-joint robots and parallel robots (DELTA), etc., and the following five types are clarified in order.
...
|
|
Contact
working hours
