First, the working hours are long
It can be operated continuously 24 hours a day, and it is necessary for workers to have a break period.
Second, it can replace manual dangerous operations
In some stamping categories, a lot of processes are very dangerous, the principle of the stamping industry is to use the weight of the punch to stamping for production, its manual operation on the side is very dangerous, the stamping robot works to eliminate the boss's scruples.
Third, the cost is low, and the cost can be recovered in half a year
A manipulator is about 4-80,000 yuan, the number of axes is different, and the brand is different. The cost will be a lot of money in the early stage, but it is equivalent to the salary of employees for most of the year when calculated by time and month.
Fourth, there is no need to pay wages, and the efficiency is high
Of course, stamping robots do not have to pay wages, and the operation efficiency is very high, compared to the error rate of manual labor is much lower.
Fifth, reduce the dependence on workers' technical skills
In our country, the proportion of general workers is very high, the dependence of workers' technical skills is also very large, the society needs to progress, and the manufacturing industry must continue to be scientific and technological, efficient, stamping robots to replace labor, will also reduce the dependence of workers' technical skills.
|
More on that
|
Precautions in the repair and maintenance of Kawasaki Kawasaki robots
Industrial robots can be operated according to pre-programmed programs, or they can directly accept human command actions, relying on their own power and control talent to complete various functions. Today's industrial robots are gradually moving towards having walking talents, a variety of perception talents, and strong pairings.
|
|
Spraying robot defect elimination method
1. Dripping
To prevent dripping, make sure that the spraying point is correct, the nozzle is clean, the spraying pressure is appropriate, and the correct nozzle size is used. If a drip occurs, it should be removed immediately and the fault corrected in the subsequent spraying process.
2. Smudge
To prevent dizziness ...
|
|
Analysis and treatment method of welding defects of welding robot - Kawasaki
The robot welding is argon-rich mixed gas maintenance welding, and the welding shortcomings presented in the welding process generally include welding deviation, undercut, porosity, etc., the specific analysis is as follows:
(1) The welding deviation may be the incorrect orientation of the welding.
|
|
Robot vacuum cleaner battery maintenance recommendations - Kawasaki robot
The presentation of robots has brought a lot of changes to our days, such as sweeping robots, ordering robots, etc., but the robot has a particularly important component, that is, the battery, and the correct use of the battery can ensure that the longer the robot is used. Robot vacuum cleaner ...
|
|
Kawasaki robot alarm code processing method
E1041
Limit switch action. Axis XX
E1042
The limit switch signal line is disconnected.
E1043
The teach-in insertion is abnormal.
E1044
The target location is outside the specified range.
E1045
(spot welding) welding and fixture mismatch.
...
|
|
Kawasaki robot repair steps
1. When patching, determine where the problem is, part of the robot problem is drive damage and machine parts problems, ask the customer who needs to repair to present the root cause of the problem and understand the problem.
2. The situation presented by the problem, e.g. ...
|
|
The difference between Kawasaki spot welding and arc welding robots
Spot welding robot and arc welding robot are the types of robots of the manufacturers in the automated welding market, spot welding robots and arc welding robots can play a greater role in the production line, the two types of welding robots have their own characteristics, the welding process is different, and the requirements of the weldable workpiece are also not ...
|
|
Kawasaki spraying robot advantages
When spraying, whether it is powder spraying or painting, it is necessary to atomize it to ensure uniformity. The composition of the paint is all chemical substances, and the paint mist and other gases evaporated are flammable, and the spraying work site is like a gasoline station, which is flammable and explosive. And the robot is powered by electricity...
|
|
Kawasaki Robotics solves the pain points of the coal mining machinery industry
In the process of cooperation between Kawasaki Robotics and Shandong Mining Machinery Group, Kawasaki found that problems such as complex equipment structure, cumbersome welding process, and multiple varieties and small batches are severe challenges faced in the welding process of coal mine machinery. And at the moment, if you still rely on traditional robots...
|
|
Kawasaki's first Chongqing-made six-axis robot officially rolled off the production line
On September 27, the first six-axis robot made by Kawasaki (Chongqing) Robot Engineering Co., Ltd. officially rolled off the production line. This robot is a robot that continuously optimizes its functions according to Kawasaki's best skills in the field of spot welding. This also marks the official production of Kawasaki Robotics Chongqing production base. ...
|
|
Kawasaki robot teaching box maintenance failure and solution
(1) Kawasaki Kawasaki Teach Pendant Poor or Partially Ineffective Contact (Replacement Contact Panel)
(2) Kawasaki teach pendant no display (repair or replace internal motherboard or LCD screen)
(3) Kawasaki teach pendant display does not ...
|
|
Linear guide installation problems – Kawasaki Robotics
How to choose smooth grease for linear guides
You know, smooth on the linear guide life is a great influence, here to say, the selection of smooth finger criteria it has the base of oil, as well as additives, if the type of brand is different, then their smooth grease function is different...
|
|
Industrial robots involve technology – Kawasaki Robotics
Robot automation is a fast-moving technology, and in just a few decades, industrial robots have become common equipment in factories all over the world.
Industrial robots can not only overcome the impact of harsh environments on production, reduce the use of labor, and ensure that workers ...
|
|
Kawasaki Robot error code part collection
Kawasaki Robotics is 100% owned by Kawasaki Heavy Industries Co., Ltd., and was officially registered in Tianjin Economic and Technological Development Area, China in August 2006.
|
|
A solution to Kawasaki Robot's collision detection function
In the collision detection function, it is applied to the Kawasaki robot arm or something to detect the collision or impact to sense the collision. These functions are called collision detection and collision detection, respectively.
In collision detection, the current motor ...
|
|
Replacement of the Kawasaki robot contact tip
The contact tip is a kind of item with high replacement frequency of welding wearing parts, the contact tip is a role in the fixed position of the welding wire when it passes, due to the excessive current that passes through the arc at the end of the welding, it is easy to melt the outlet of the contact tip, causing the welding wire and the contact tip to be fused together, can not ...
|
|
Kawasaki Industrial Robot automates the production line
What is the posture of the modern automatic production line?
The active production line is composed of a workpiece conveying system and a control system, a group of active machine tools and auxiliary equipment in accordance with the process sequence, and actively completes the full or partial manufacturing of products.
|
|
The dominant attribute of cobots - Kawasaki robots
Safety-level monitoring station - this form of operation requires the robot system to monitor the work area and stop all actions when someone enters the collaborative work area. This monitoring may touch the use of lasers to monitor whether someone has crossed the edge of the work area, switch to monitor whether the door is open in a closed space, ...
|
|
The basic component of the human-computer interaction system - Kawasaki Robot
The human-computer interaction system is a skill science that studies the communication and communication between people and computers through mutual understanding, and completes the functions of information management, service and processing for people to the greatest extent, so that computers can truly become a harmonious assistant for people's work and study.
...
|
|
Kawasaki robot force feedback method
There are three main ways to measure the force sensor and force response at the hardware level:
(1) Current loop: The current closed-loop force closed-loop reaction control through the motor is suitable for direct drive motors (Direct Drive Mo ...
|
|
Contact
working hours
