Application Flexibility—Actuators can be set either push-down open or push-down shut-off and can be installed anywhere in the four actuator/body mounting positions.
Minimized dead zone—Single-joint connection plus splined clamp linkage reduces idling to a low level and improves control accuracy.
Compact – 30 percent smaller overall size compared to comparable actuators.
Long service life—Rugged construction provides stability and corrosion resistance, and protects the actuator from deformation under overpressure.
Adjustability – Actuator/valve connection encapsulated, but valve packing can still be adjusted without removing any parts.
Easy monitoring—high-visibility stroke indicator for easy valve positioning.
Actuation mode: double-acting, quarter-angle rotation, rotation
Certifications: PED, CUTR, ATEX
Control Type: On/Off, Throttling
Power source: pneumatic
Valve types: ball valves, butterfly valves, eccentric embolic valves, three-way offset valves
The size of the valve is connected to the end face
14, 16, 18, 20 and 24 inch valves, or pair clamp (flangeles) or single flange (with lugs), convex flange, ANSI150 or 300 grade
* Large buck
Meets ANSI 150 and 300 lb pressure-temperature ratings per ASME B16.34
Valve shut-off classes according to ANSI/FCI 70-2 and IEC 60534-4
Standard Soft Seal: Bi-directional Shutdown Class VI (Bubble Seal)
NOVEX SEAL: UNIDIRECTIONAL SHUT-OFF CLASS V (REVERSE FLOW DIRECTION ONLY)
Phoenix III Seal: Bi-directional Shutdown Class VI (Bubble Seal)
Fire-retardant Phoenix III seals:
One-way shut-off Class VI (reverse flow direction only) (bubble sealing). It is fire tested according to API 607 Rev.4.
Flow coefficient ratio
100 to 1
The action of the valve/actuator
In the case of a diaphragm or piston rotary actuator, the on-site positive and negative action can be switched between the following two actions:
Push-down closing (closing the valve when the actuator push-rod extends) and push-down opening (opening the valve when the actuator push-rod extends)
Body classification
End-to-end dimensions meet the requirements of MSS SP68 and API 609 standards; The body is designed to fit between ASME B16.5 Class 150 and 300 lb class convex flanges
The butterfly plate rotates
Rotate 90 degrees clockwise (as seen from the end of the drive shaft) to close
This article introduces Fisher/Fisher 1061 pneumatic piston rotary actuator products, if you are interested in Fisher/Fisher pressure regulator, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Fisher/Fisher Models 119, 119EZ, and 119EZS Changeover Valves
The Model 119 switching valve is used for on/off or throttling control of non-corrosive or slightly corrosive gases. They are designed to meet the requirements of low-pressure gas applications in a variety of industries. The 119EZ and 119EZS are used as fuel gas valves for oil and gas natural draft burners. The product comes with a built-in speed control ...
|
|
Fisher/Fisher 1061 Pneumatic Pilot Rotary Actuator
The Fisher 1061 actuator is used to operate splined shaft rotary control valves such as Fisher Vee-Ball™ valves, eccentric butterfly valves, and butterfly valves. The actuator/body connection of this actuator can be set either as push-down open or push-down as off. In addition, 1061 ...
|
|
Fisher/Fisher Control Valve - V150S-V-Ball Rotary Flange Control Valve
Fisher Control Valve V150S V-Ball Rotary Flange Control Valve, which uses rugged construction, highly abrasion-resistant trim materials, and unrestricted DC access, makes this valve ideal for controlling abrasive slurries. This design is particularly effective in reducing ...
|
|
Fisher/Fisher Model R222H Primary Regulator for LPG
Introduction: The Fisher/Fisher Model R222H is a one-stage regulator that offers 65% higher flow and 40% smaller volume than standard compact regulators for use in underground tanks or airchambers where space is limited. Approved by Underwriters Laboratories (UL) (United States Safety Testing Laboratories Inc. ...
|
|
Fisher/Fisher Model R622H Primary Regulator
The Model R622H regulator is certified by Underwriters Laboratories (UL), United States Safety Testing Laboratories, Inc., for use in LPG two-stage pressure regulating systems. The outlet pressure of the liquefied gas storage tank is reduced to 10 psig / 0.69 bar after being regulated by a pressure regulator.
peculiarity
Build...
|
|
Fisher/Fisher DVC6010 DVC6020 DVC6030 Valve Positioner
FIELDVUE™ DVC6200 AND DVC2000 DIGITAL VALVE CONTROLLERS ARE CERTIFIED FOR HART® COMMUNICATION INSTRUMENTATION FOR NON-FLAMMABLE, INTRINSICALLY SAFE, FIRE, AND EXPLOSION-PROOF APPLICATIONS. Digital valve controllers are available for single- or double-acting actuators. THE FIELDVUE DIGITAL VALVE CONTROLLER PROVIDES ...
|
|
Fisher/Fisher Model R231A Integrated Two-Stage Regulator
The Model R232A regulator is certified by Underwriters Laboratories (United States Safety Testing Laboratories, Inc.) for use in LPG systems. The regulator is designed to reduce tank pressure through an integrated two-stage system that provides an 11-inch water column of outlet pressure. For the people ...
|
|
Fisher/Fisher Vee-Ball™ V150S Flanged Control Valve Shut-off Level 1
Introduction: The Fisher/Fisher Vee-Ball™ V150S flanged control valve has a hemispherical construction and is equipped with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.
|
|
Fisher/Fisher dirty service trims
Fisher dirt service trims are designed for dirt and cavitation applications. Cavitation is eliminated with a range of flow limits and extensions, allowing particles up to 19mm (3/4in) in diameter to pass through without clogging. Each trim stage has a sequentially increasing flow ...
|
|
Fisher/Fisher Model ACE95 Steam Storage Tank Seal Valve
The Model ACE95 is a pilot-acting steam storage tank seal valve for precise pressure control in low-pressure sealing systems. Constructed of stainless steel, the unit is actuated by a large diaphragm actuator that accurately controls the seal pressure with a single adjustment bolt.
peculiarity
Fully balanced and non-motorized ...
|
|
Fisher/Fisher 1077 Manual Handwheel Actuator
Locking it by adjusting the stroke limiter provides accurate disc and ball positioning in both the closed position (0 degrees) and the open position (90 degrees). For 60-degree operation, a stroke limiter can be used to establish a valve disc or ball closure stop at any angle between 0 and 30 degrees.
|
|
Fisher/Fisher D2T FloPro Control Valve 2250 psig pressure drop force
Introduction: The Fisher/Fisher D2T valve is best suited for use as a dump valve for gas separators and scrubbers. It is also suitable for other high-pressure applications in natural gas production, compression and processing.
Features:
Optional 1 NPT end connection.
Have a C ...
|
|
Fisher/Fisher KTM Mecafrance Series RA Floating Ball Valve
KTM Mecafrance Series RA three-piece ball valves with oscillating centre section designed for reliable use with easy seat and gasket replacement. The RA series is available with full and reduced boreholes, cast in carbon or stainless steel, and has an ISO top flange for easy automation.
Feature: Swing center part ...
|
|
Fisher/Fisher 627 Series Commercial/Industrial Regulators
Fisher's 627 Series direct-acting pressure reducers are suitable for use in both low- and high-pressure systems. These regulators can be used with natural gas, air, or a variety of other gases. Performance characteristics vary according to the structure.
peculiarity
Internal pressure relief valve
Model 627R and 627MR stroke limiters
Discharge Operation Indicator ...
|
|
Fisher/Fisher DSA Vapor Regulated Desuperheater Pressure Rating ASME
Introduction: The Fisher/Fisher DSA steam conditioning desuperheater uses high-pressure steam to rapidly and thoroughly atomize water jets in a low-flow steam line. The desuperheater is flanged to a pipe with DN 200 (NPS 8) or larger. This desuperheater is suitable for applications that require a high turndown ratio.
...
|
|
Fisher/Fisher DFA adjustable nozzle type desuperheater
The Fisher DFA (Flexible Desuperheater) includes a water control element and a stand-alone desuperheater (with adjustable nozzles and mechanical atomization) for medium to high flow variation applications. The DFA is mounted to the NPS 8 or larger pipe end via a flange connection. specification
Certified PED, C...
|
|
Fisher/Fisher FB Welded Angle Valve PEEK Drop Resistant
Introduction: Fisher/Fisher FB welded angle valves control compressible fluids and can be used in special applications that require maximum noise reduction and high flow capacity. Typical applications include main steam pressure reducing valves and compressor bypass valves. FB valves are also commonly used in petrochemical and natural gas processing plants for acidic ...
|
|
Fisher/Fisher TBX Steam Control Valve Reduces steam pressure
Description: Fisher/Fisher TBX steam control valves reduce the pressure and temperature of steam to keep power plants running every day. In addition, it protects reheater tubes, condensers, and pipes from excessive pressure, temperature, and enthalpy excursions during steam turbine trips.
Products...
|
|
Fisher/Fisher EZR Series Pressure Reducing Regulators
The EZR commander-action pressure reducing regulator runs accurately, smoothly and quietly, with tight shut-off and long service life, even in dirty conditions. The EZR series can be installed in a variety of applications such as natural gas transmission/distribution systems, industrial and commercial facilities. EZROSX ...
|
|
Fisher/Fisher 4320 Wireless Position Monitor
The Fisher 4320 Wireless Position Monitor requires no wiring to connect to a pneumatically actuated on/off valve. It utilizes the percentage of range and on/off indication to indicate the device position with a precise wireless feedback signal. The 4320 can be used to control and/or monitor valves, linear pressure regulators, displacements, and floats.
|
|
Contact
working hours
