Fisher/Fisher Model R231A Integrated Two-Stage Regulator

Fisher™ 8580 High Performance Butterfly Valve | The Fisher 8580 High Performance Butterfly Valve features enhanced shut-off with an eccentric mounting butterfly plate with soft or metal seals. This control valve provides an excellent throttling and switching performance experience. Authentication...

The WhisperTube is a passive reactance silencer that is installed downstream of a control valve or other device that generates system noise. The pressure drop across the device has a negligible effect on the WhisperTube, so the system can be reduced in a wide range of operating conditions without impacting flow or process. Peculiarity...

Fisher multi-way valves and actuators divert fluid from a single fluid line to a test outlet or sampling device. A single multi-flow selector acts as a manifold that brings together eight fluid lines at once. Actuator is an electronic device designed to control and monitor the operation of multiple flow selectors.

Flexible module design – The 3582 Series units can be upgraded to the Model 3582i Electro-Pneumatic Positioner in the field to replace the measurement module with the Model 582i Electro-Ptic Converter Assembly (1). The Type 582i electric-gas converter is attached to the housing of the positioner and provides a very economical ...

KTM Mecafrance Series RA three-piece ball valves with oscillating centre section designed for reliable use with easy seat and gasket replacement. The RA series is available with full and reduced boreholes, cast in carbon or stainless steel, and has an ISO top flange for easy automation. Feature: Swing center part ...

Fisher easy-e ED control valves are available with straight-through valve bodies, which can be used for regulation or on-off control of a wide range of liquids and gases. With a balanced plug design, cage guidance, and metal-to-metal sealed seat, the Fisher easy-e straight-through valve lets your fluids ...

The Fisher EZ-OVT trim is a dual-seated trim designed for long-term, tight shut-off in on/off applications where fluids contain particulates, such as catalyst powders. These valves are suitable for controlling and cleaning hydrogen used in the refining process of UOP Continuous Catalyst Regeneration (CCR).

The 44-1300 Series is a high-pressure, high-flow pressure reducing valve that offers both bleed and balanced spool designs. The 44-1300 series is available with Cv = 0.8 and 2.0. Chamber-loaded and pneumatically compressed load models are available. Ideal for commercial diving, breathing air, special gas mixture regulation, rigid kit diving...

The Fisher 3610J pneumatic positioner can be used with a single-acting rotary actuator to precisely locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...

Introduction: The Fisher/Fisher V250 control valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, and the shear action between the V-notch ball core and the spherical seal improves the valve's ...

The Model 1098-EGR regulator provides economical and sophisticated pressure control for a wide range of applications, including: natural gas systems; fuel gas supply for industrial boilers, gas supply for furnaces and rubber mixers; and applications in commercial or industrial enterprises such as rolling mills, asphalt manufacturing plants, etc. This...

F1 ELDVUEDVC6000 Series Digital Valve Controller (Fig. 1) and Actuator. The digital valve controller receives the valve stroke position in Figure 2) is a communicative, microprocessor-based conversion of electrical signals into feedback, as well as air supply pressure and pneumatic pressure of the actuator. This makes ...

Product Description: Type 1051 and Type 1052 diaphragm rotary actuators are pneumatic spring-return actuators suitable for rotary control valves and other equipment. The Type 1051 actuator can be used for switching or throttling operations when equipped with a valve positioner. Type 1052 Actuator with or without Valve ...

The Fisher 2052's highly versatile features and compact actuator design assist with throttling or on/off applications. It can be installed on any valve, even when space is limited. specification Actuation method: spring return, quarter-angle rotation, rotation Certified PED compliant ...

Introduction: Fisher/Fisher A31A low-temperature, high-performance butterfly valves are designed for extreme temperature, cryogenic applications, with an extended body that keeps encapsulated systems and actuators away from extreme temperatures. The valve also features a metal NOVEX eal seal that provides tight shut-off, low operating torque and ...

Introduction: The Fisher/Fisher D2T valve is best suited for use as a dump valve for gas separators and scrubbers. It is also suitable for other high-pressure applications in natural gas production, compression and processing. 　　Features: Optional 1 NPT end connection. Have a C ...

1 NPT end connection CL900 (2250 psig) pressure rating FloPro field selectable flow rates for 1/4, 3/8, and 1/2" port sizes Rugged alloy 6 trim for use in corrosive applications Full 2250 psig pressure drop capability Suitable for NACE ...

　Introduction: The Fisher/Fisher Model R222H is a one-stage regulator that offers 65% higher flow and 40% smaller volume than standard compact regulators for use in underground tanks or airchambers where space is limited. Approved by Underwriters Laboratories (UL) (United States Safety Testing Laboratories Inc. ...

A control valve is a valve that is fully or partially opened or closed in a pipeline according to the process signal to control the flow, pressure, temperature and liquid level. Information on Fisher®, Baumann™ and POSI-SEAL™ brand control valves can be found via the links on this page. ...

Locking it by adjusting the stroke limiter provides accurate disc and ball positioning in both the closed position (0 degrees) and the open position (90 degrees). For 60-degree operation, a stroke limiter can be used to establish a valve disc or ball closure stop at any angle between 0 and 30 degrees.