The basic concept of human-machine interface - Buke

Create Date: 2024-8-30 12:03:23|Source: Kinco/Buko

Hmi:

Human-machine interface refers to the field in which man and machine contact or interact with each other in information exchange and function, or the human-machine interface mentioned in the interface.

Information exchange, functional contact or mutual influence, refers to the hard contact and soft touch of man and machine, this combination not only includes the direct contact of points, lines and surfaces, but also includes the space of long-distance information transmission and control. The man-machine interface is the central link in the man-machine system, which is mainly studied and proposed by the sub-discipline of safety engineering, safety ergonomics, and through safety engineering, equipment engineering, safety management engineering and safety system engineering to study specific solutions, means and measures safety ergonomics. It enables the transformation between the internal form of information and the form that is acceptable to humans. Human-machine interfaces exist in all areas involved in the exchange of information between humans and machines. Widely used in industry and commerce, simply divided into "input" (Input) and "output" (Output) two, input refers to the operation of machinery or equipment by people, such as handles, switches, doors, instructions (orders) issued or maintenance, etc., and output refers to the notice sent by machinery or equipment, such as faults, warnings, operating instructions, etc., a good man-machine interface will help users operate machinery more simply, more correctly and more quickly, It can also maximize the efficiency of the machine and prolong the service life, while the human-machine interface referred to in the market refers to the user-friendly operation interface of the software in a narrow sense.

Industry-specific human-machine interfaces may have specific definitions and classifications, such as Industrial Human-machine Interface (Industrial HMI).

Interactive:

Human-Computer Interface (HCI, also known as user interface or user interface): It is a study of the interaction between systems and users. Systems can be a wide variety of machines, as well as computerized systems and software. A human-computer interface usually refers to the part that is visible to the user. The user communicates with the system through the human-computer interface and operates. As small as the playback button on a radio, as large as the dashboard of an airplane, or the control room of a power plant.

Human-Computer Interaction (HCI) is the science of designing, evaluating, and implementing interactive computing systems for human use, as well as the study of these phenomena.

Human-computer interaction and human-computer interface are two closely related but different concepts.

Relationship between human-computer interaction and human-computer interface:

Human-computer interaction refers to the interaction between humans and machines, which is essentially the interaction between humans and computers. Or more broadly: human-computer interaction refers to the interaction between a human and a machine containing a computer. Specifically, human-computer interaction between the user and the machine containing the computer two-way communication, in a certain symbol and

LCD screens are used as human-machine interface displays

Actions such as keystrokes, moving the mouse, displaying symbols/graphics on the screen, etc. This process includes several sub-processes: identifying interactive objects, understanding interactive objects, grasping object modality, information adaptation and feedback, etc.; The human-computer interface refers to the communication medium or means between the user and the machine system containing the computer, and is the supporting software and hardware for the two-way information interaction between man and machine. Here the interface is defined as the medium or means of communication, and its materialization is the relevant support

Software and hardware, such as a graphical display terminal with a mouse, etc.

Interaction is a description of the human-machine-environment relationship/situation. Interface is a concrete expression of the interaction between humans and the machine-environment. Interaction is the situational portrayal of information communication, and interface is the means to achieve interaction. In the interaction design subsystem, interaction is the content/soul, and the interface is the form/body; However, in the large product design system, interaction and interface are only a means to solve the human-computer relationship, not the ultimate goal, and its ultimate goal is to solve and meet human needs.

Interaction design is subordinate to the product system and is a powerful support and improvement for successful product design.

From the perspective of systems theory, interaction design is subordinate to a subsystem of the product design system.
The basic concept of human-machine interface - Buke

More on that
Buke servo drive fault code 021.2 Buke servo drive fault code 021.2

1. Fault code: E-01, E-02 Significance: The parameters are initialized incorrectly during power-on. Cause: Incorrect parameter settings. Solution: Power back on, if the fault is still reported, you need to force the parameter initialization, if it is repeated many times, it cannot be solved.

How to adjust the speed parameters of Buke servo motor - AC motor? How to adjust the speed parameters of Buke servo motor - AC motor?

1. Change the rotational speed by changing the frequency of the mains supply This is a common method of speed adjustment for AC motors. The power supply frequency can be adjusted to the desired speed by adjusting the inverter, transformer, and other equipment. 2. Change the rotational speed by changing the voltage In some special cases ...

Buke servo drive - the wiring method of the stepper driver and PLC Buke servo drive - the wiring method of the stepper driver and PLC

1. First of all, the first step is to power the 24V power supply: brown positive blue negative yellow and green wire. 2. Then it is necessary to connect the two sets of wires of the motor to the A+ A-, B+ B- of the driver. 3. Then connect the 24v power supply-v to the GND of the driver. 4. And then ...

Buke servo motor - the setting of common parameters of servo drive Buke servo motor - the setting of common parameters of servo drive

(1) Azimuth share gain Sets the share gain of the azimuth ring adjuster. The higher the set value, the higher the gain, the greater the stiffness, and the smaller the azimuth lag under the same frequency command pulse. However, too large a value may cause vibration or overshoot. The parameter values are determined by the detailed servo ...

Buke servo motor - what are the main components of the motor? Buke servo motor - what are the main components of the motor?

The main components of the motor include: 1. a frame; 2. an iron core; 3. a winding; 4. an end cover; 5. a bearing; 6. Centrifugal switch or starting relay and PTC starter; 7. a nameplate. 1 frame The frame structure varies depending on the cooling method, protection type, installation method and purpose of the motor.

Buke servo motor - the division of the motor and its detailed introduction Buke servo motor - the division of the motor and its detailed introduction

1. According to the type of working power supply: it can be divided into DC motor and AC motor. 1) DC motors can be divided into brushless DC motors and brushed DC motors according to their structure and working principle. Brushed DC motors can be divided into: permanent magnet DC motors and electromagnetic DC motors.

What should I do if the Buke servo drive alarm 0006? What should I do if the Buke servo drive alarm 0006?

Drive Alarm 0006 Please troubleshoot in the following order: 1. Is the motor model correctly configured? 2. Is the motor encoder cable firmly connected? 3. If the above two points are correct, please replace the motor or driver for cross-comparison and troubleshooting. As mentioned above ...

Buke touch screen - the classification of touch screen and its characteristics introduction Buke touch screen - the classification of touch screen and its characteristics introduction

1. Resistive touch screen The most important part of a resistive touchscreen is a resistive thin-film screen that matches the surface of the display very well. This is a multi-layer composite film based on a layer of glass or hard plastic plate, coated with a transparent metal oxide (ITO indium oxide, transparent conductive ...

Buke servo motor - the cause of common faults in motors Buke servo motor - the cause of common faults in motors

1. Sweeping: Sweeping is generally caused by friction of the stator and rotor due to bearing damage, shaft bending, or improper assembly during maintenance. In the process of overhaul and assembly of the motor, the parts of the motor should be kept clean, and the assembly of the end cover, bearing, etc. should be reasonable and not barbaric construction, otherwise ...

Buke servo motor - how to correctly select the servo motor Buke servo motor - how to correctly select the servo motor

1. Calculate the load inertia and the matching of inertia, and the inertia matching of some products can reach 50 times, but in fact, the smaller the better, so that the accuracy and response speed are good. 2. Conversion of load torque on motor shaft and calculation of acceleration and deceleration torque. 3. Rotation speed and encoder resolution ...

Common faults of Buke servo motors Common faults of Buke servo motors

What are the power requirements for hardware setup 1, ED100 and ED200? The logic power supply of the Kinco servo is DC24V (scale is 18V-30V), not less than 1A (if the boundary says OUT and Brake output, it is not less than 2A); The power supply of ED100 is DC24V-DC70V, and the power supply requirements of ED200 and ED216 are D...

Buke servo motor - servo drive repair fault code Buke servo motor - servo drive repair fault code

1:11 alarm, control the power supply undervoltage, control the power inverter on P. The voltage between N is lower than the specified value. There are defects in the internal circuitry of the driver, etc. 2:12 alarm, control power supply overvoltage, control power inverter on P. N voltage exceeds the specified value, ...

Buke servo motor - the difference between various motors Buke servo motor - the difference between various motors

The ordinary motors, stepper motors, servo motors, and servos mentioned here refer to DC micro motors, and most of the DC motors we usually come into contact with. An electric motor, also known as a "motor", refers to an electromagnetic induction device that maintains the transformation or transmission of electromagnetic energy according to the laws of electromagnetic induction. Motor...

Buke servo motor - how to detect the quality of three-phase AC motor? Buke servo motor - how to detect the quality of three-phase AC motor?

1. Shake the meter, 500V can shake the meter, and shake the insulation resistance of the line on the three binding posts to the motor shell, which should be above 0.5M ohm, which means that there is no short circuit to the ground (Yantai motor maintenance). 2. Multimeter measurement: measure the resistance between the three phases of A/B/C, whether it is equal, it should be about the same...

Buke servo motor - how to care for and maintain servo motor Buke servo motor - how to care for and maintain servo motor

1. Regularly check the encoder connection line of the servo motor and the power connector of the servo motor to confirm that they are firmly connected; 2. If the servo motor is connected to a reduction gear, the servo motor should be sealed with oil to prevent the oil from the reduction gear from entering the servo motor. ...

The reason for the maintenance failure of the Buke servo motor that is shut down due to pollution The reason for the maintenance failure of the Buke servo motor that is shut down due to pollution

1. Bearing lubrication failure or bearing surface damage Contaminants can disrupt bearing lubrication and damage bearing surfaces. This will cause the friction to generate heat. If the problem cannot be solved, the increased heat may cause a catastrophic failure of the bearing and the Buke motor to stop running. 2、 ...

Buke won the "Annual Quality Supply Chain Award" and "Annual Customer Satisfaction Brand in the Field of Motion Control"! Buke won the "Annual Quality Supply Chain Award" and "Annual Customer Satisfaction Brand in the Field of Motion Control"!

On December 7, Buke was invited to participate in the "2020 China Mobile Robot (AGV/AMR) Industry Development Annual Conference" hosted by the People's Government of Songjiang District, Shanghai and hosted by the China Mobile Robot (AGV) Industry Alliance. At the same time, Buke has also won the "Annual Quality Supply Chain Award" for three consecutive years.

Buke servo motor - fault and treatment of phase asynchronous motor(6-11) Buke servo motor - fault and treatment of phase asynchronous motor(6-11)

6. When the motor is unloaded and overloaded, the ammeter pointer is unstable and swings 1. Cause of failure (1) The cage rotor guide bar is welded or broken; (2) Winding rotor fault (one-phase break) or poor contact of brushes and collector ring short-circuit devices. 2. Troubleshooting ...

Buke servo motor - advantages and disadvantages of DC and AC servo motors Buke servo motor - advantages and disadvantages of DC and AC servo motors

Advantages and disadvantages of DC servo motors Advantages: accurate speed control, torque speed characteristics are very hard, simple control principle, easy to use, cheap price. Disadvantages: brush commutation, speed limit, additional resistance, occurrence of wear particles (not suitable for dust-free and explosive environments). Straight...

Buke servo motor - wiring connection of servo motor encoder Buke servo motor - wiring connection of servo motor encoder

(1) Wiring should be done with the power supply OFF, and if the output line is in contact with the power supply when the power is turned on, the output circuit may be damaged. (2) If the wiring is incorrect, the internal circuit may be damaged, so pay full attention to the polarity of the power supply when wiring. (3) If and high-voltage lines, ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top