On December 7, Buke was invited to participate in the "2020 China Mobile Robot (AGV/AMR) Industry Development Annual Conference" hosted by the People's Government of Songjiang District, Shanghai and hosted by the China Mobile Robot (AGV) Industry Alliance. At the same time, Buke has also won the honor of "Annual Quality Supply Chain Award" for three consecutive years.
As expected, on December 17, at the annual "Intelligent Manufacturing and China Motion Control/Direct Drive Industry Development Summit Forum and Award Ceremony" co-sponsored by China Transmission Network and China Motion Control Industry Alliance, Buke also won the award for three consecutive years. In this year, Buke won the heavyweight award of "Customer Satisfaction Brand 2020", which is highly influential and professional.
In recent years, Buke has been keeping up with the development trend in the field of operation control, constantly going deep into the industry segments, realizing technological innovation, providing customers with professional technical support, and gradually going deep into customers to help customers achieve leading advantages in more market segments. In the field of low-voltage control, Buke invested in the research of small precision low-voltage servo systems earlier, and occupied a market advantage in the AGV trolley industry such as mobile robots, logistics sorting lines, and medical imaging diagnostic equipment.
With strong independent research and development capabilities of low-voltage servo, Buke has many innovative and easy-to-implement complete sets of motion control solutions such as AGV mechanical automation and Internet of Things motion control solutions, AGV electronic motion control solutions, single-piece separation equipment motion control solutions in the logistics industry, helping many mobile robot enterprises and logistics equipment manufacturers to seize market opportunities. Now, Buke logistics servo series products and solutions have achieved the goal of occupying half of the AGV logistics market from 0 to half of the AGV logistics market in the industry.
Buke company is an in-depth partner in the field of high-end medical devices at home and abroad. For more than 10 years, as an expert in motion control of large-scale medical equipment, Buke has always adhered to the principle of "innovation-oriented", developed high-precision, high-speed, safe and stable, and customized motion control products and solutions, greatly improved the operation efficiency and accuracy of medical imaging equipment, and established a good reputation in the industry.
These two awards are a double recognition of the technical strength and brand strength of Buke in the whole industry chain of the motion control industry, which is not only an honor, but also a responsibility, and a driving force for Buke!
In the future, Buke will continue to focus on the advantages in the field of motion control, constantly improve products and solutions, based on more subdivided industry needs, create more new application scenarios of servo products, truly create value for industry customers, and also inject strong impetus into the internationalization of China's manufacturing industry!
|
More on that
|
Buke servo motor - three control modes of servo motor and detailed introduction
In terms of the response speed of the servo drive: the torque mode has the smallest amount of calculation, and the driver responds the fastest to the control signal; The position mode is the most computationally intensive, and the driver is the slowest to respond to the control signal.
When there are relatively high requirements for dynamic performance in motion, it is necessary to ...
|
|
Buke servo motor - fault and treatment of three-phase asynchronous motor(1-5)
1. The motor cannot rotate after being energized, but there is no abnormal noise, no peculiar smell and smoke.
1. Cause of failure
(1) The power supply is not connected (at least two phases are not connected);
(2) Fuse blowing (at least two-phase blowing);
(3) The overcurrent relay is adjusted too small;
(4) Control ...
|
|
How to solve the problem that the touch screen of Buke does not respond?
1. Check whether the joints of each connecting line are loose;
2. Check whether there is a conflict between the serial port and the abort number, and if there is a conflict, the resources should be adjusted to circumvent the conflict. Then check whether there are gaps in the surface layer of the human-machine interface, and if there are gaps, they should be replaced immediately. It also needs to be inspected ...
|
|
Buke servo motor - the output signal of the servo motor encoder
1. OC output: It is commonly said that the triode output, and the input impedance and circuit circuit need to be considered for connection.
2. Voltage output: In fact, it is also a format of OC output, but it has a built-in active circuit.
3. Push-pull output: the interface is easy to connect, no need to consider NPN and PN ...
|
|
Buke touch screen - daily maintenance and main matters of touch screen
Daily maintenance of the touch screen:
1. The capacitive touch screen should generally be filmed, and it should be pasted well. membranes (double-layer membranes) that meet ESD standards;
2. The capacitive touch screen is cleaned regularly, and the liquid crystal cleaning solution used for the computer is used (alcohol and furniture cleaning liquid cannot be used);
3. Transport...
|
|
Buke servo motor - the requirement of the servo feed system
1. Wide range of speed regulation
2. High positioning accuracy
3. There is sufficient transmission rigidity and high speed stability
4. Fast response, no overshoot
In order to ensure productivity and processing quality, in addition to high positioning accuracy, it is also required to have a good and fast response ...
|
|
The solution to the fault code 400.0 of the Buke CD420 servo drive
1. Check whether the power supply voltage is stable and whether the logic voltage is within the input range of the driver, and use a separate power supply to supply power to the logic circuit;
2. The target current limit is set too small, and the current limit is increased within the allowable range. If you still can't find the reason for the above solutions, please ...
|
|
Buke servo motor - AC servo motor vibration fault analysis
Mechanical
1. Bearing
The bearing clearance on the lead screw housing is too large after wear, or the bearing roller elements and cages are severely worn due to the lack of grease in the bearing, resulting in excessive loads. After bearing wear, the clearance is too large, which will cause the coaxiality error between the center of the motor rotor and the center of the lead screw.
|
|
Buke servo motor - the detailed steps of the zero point adjustment of the servo motor encoder
1. Remove the damaged encoder
2. Install a new encoder on the damaged motor
3. Find the Z signal and two power cords according to the figure, the general power supply is 5V.
4. Prepare a 24V and 5V output switching power supply with a slightly modified open circuit alarm and ...
|
|
Buke servo motor - the cause of common faults in motors
1. Sweeping: Sweeping is generally caused by friction of the stator and rotor due to bearing damage, shaft bending, or improper assembly during maintenance. In the process of overhaul and assembly of the motor, the parts of the motor should be kept clean, and the assembly of the end cover, bearing, etc. should be reasonable and not barbaric construction, otherwise ...
|
|
Buke servo motor - what are the advantages of AC servo motor?
1. High efficiency
Due to its unique speed-torque capability, AC motors offer the highest efficiency for many applications, which allows them to run a wide range of applications while minimizing heat, wear, or degradation. Therefore, AC motors are often used to form large ...
|
|
Buke touch screen - touch screen touch no response fault causes and treatment methods
Cause of the failure
1) The sound wave reflection stripes on the four periphery of the surface sound wave touch screen are seriously dusty or scale, resulting in the touch screen not working.
2) The touch screen is malfunctioning.
3) The touch screen control card is faulty.
4) The touch screen signal line is faulty ...
|
|
How to zero the encoder of Buke motor?
1. Remove the motor encoder, power on the system, and power on the driver
2. Set the drive password to 510 and the No. 4 parameter to 4 (encoder zeroing mode)
3. Switch the driver to the encoder zero mode CO-press the confirm key to enter the CO-rdy ...
|
|
What are the advantages of Buke motor - frameless motor?
Boost machine performance
Direct coupling (no backlash)
Higher system bandwidth
Improve machine efficiency
More compact structure
The machine takes up less space
The highest torque per unit volume
Reduced maintenance
Fewer mechanical parts
No grinding ...
|
|
Buke servo motor - what is the cause of servo motor jitter?
Point 1
When the servo motor jitters at zero speed, the gain should be set high, which can reduce the gain value. If the alarm stops when starting, the most likely is that the phase sequence of the motor is incorrect.
Point 2
1. When the PID gain adjustment is too large, it is easy to induce...
|
|
Buke set off a new frenzy of "M-IoT machine Internet of Things".
On December 10th, the "2020 Buke - IoT Machine Internet of Things Solution Seminar" was held in Wenzhou Ruian, with more than 60 company leaders including Tang Dong, chairman of Buke Co., Ltd., Wang Gang, sales executive, and Ouyang Yunsheng, director of HMI products, attended by more than 60 company leaders, as well as new/old agents and terminals from Wenzhou.
|
|
Buke servo motor - what are the parameter settings of servo motor drive?
1. Position proportional gain
Set the proportional gain of the position ring adjuster; The higher the set value, the higher the gain, the greater the stiffness, and the smaller the position lag under the same frequency command pulse. However, too large a value may cause oscillation or overshoot; The parameter values are determined by the specific servo system type ...
|
|
Buke servo motor - servo drive fault and treatment method
1. When the motor rotates, the LED light flashes
(1) Cause of failure: HALL phase error. Solution: Check whether the motor phase setting switch is correct
(2) Fault cause: HALL sensor failure, treatment method: When the motor rotates, detect the voltage of HalA, HalB, HalC ...
|
|
Buke servo motor - servo motor encoder selection attention
One. SERVO MOTOR DIMENSIONS: 38MM, 58MM, 66MM, 80MM.100MM.
Two. Servo motor encoders are divided into: singleturn, multiturn.
Three. Servo motor encoders are divided into magnetic absolute encoders and photoelectric absolute encoders according to the principle
Four. Servo motor ...
|
|
Buke servo motor - what are the basic applications of AC servo motor?
Material metering
The measurement of powdery materials is commonly used in the way of screw measurement. The purpose of measurement is achieved by the number of turns of the screw rotation. In order to improve the accuracy of measurement, the speed of the screw is required to be adjustable, and the position positioning is accurate.
|
|
Contact
working hours
