Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. All direct-detection sensors that support the windowed mode function can be used as retroreflective sensors (see Retroreflective Sensors).
Specifications:
General characteristics | Sensing range | 15 ... 200 mm | Adjustment range | 20 ... 200 mm | Blind spots | 0 ... 15 mm | Standard target plates | 100 mm x 100 mm | Transducer frequency | Approximately 400 kHz | Response delay | About 30 ms | Indicator/Action key | Yellow LED | Displays the illumination status
Flashing: Target detected under the TEACH-IN function | Red LED | Solid red light: An error occurred
Flashing red light: No target detected under the TEACH-IN function | Electrical characteristics | Operating voltage | 10 ... 30 V DC, ripple 10%SS | No-load current | ≤ 30 mA | input | Enter the type | 1 TEACH_IN input
Working distance 1: -UB ... +1 V, Working distance 2: +6 V ... +UB
Input impedance: > 4,7 kΩ TEACH-I pulse: ≥ 1 s | output | Output type | 1 switch output, PNP NO / NC, programmable | Rated operating current | 100 mA, short-circuit/overload protection | Default setting | Switching point A1 20 mm Switching point A2 200 mm | Voltage drop | ≤ 3 V | Repeatability | ≤ 1 % | Switching frequency | ≤ 13 Hz | Hysteresis range | 1% of set working distance | Temperature drift | ± 1,5 % of full-scale value | Licensing and Certification | UL recognized | cULus recognized, Class 2 power supply | CCC certified | Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark. | Surroundings | Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | Mechanical properties | Connection type | Connector M12 x 1, 4-pin | Ingress protection | IP67 | material | | | enclosure | Brass is nickel-plated | | Transducers | epoxy/hollow glass sphere mixture; Polyurethane foam, outer shell PBT | weight | 25 g |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Reflector Type Photoelectric Switches ML100-55/103/115 Compact
Product Introduction:Retroreflective Plate Sensor with Polarization Filter, Plastic Housing, 5 m Detection Range, Red Light, Adjustable Sensitivity, Switch-On When Bright/Dark, DC Type, PNP Output, Fixed Cable, Compact Design, Easy to Use, Clear LED Indication, Power Supply, Switching Status, Stable ...
|
|
P+F/Inductive sensor NBN4-12GM40-E0/E2 DC 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/DK12-11/124/136 M12 plug
Product introduction: The characteristics of P+F color mark sensor are: low contrast detection under high resolution, short response time; It is not sensitive to the deviation of the height and angle of the detected material; The optical lenses are 90° interchangeable. Just press the TEACH-IN button and the emitter LED will automatically select the best ...
|
|
P+F Safety Barrier Module H Series 16 slots
Introduction: The H-Series can be connected to hazardous area field devices and control systems by mounting multiple isolation barriers on terminal boards. Compared to a single interface module, the terminal block greatly simplifies wiring and saves costs. The terminal block is equipped with a sturdy plastic enclosure for quick and secure installation in the cabinet.
|
|
P+F/Fiber Optic Sensor MLV41-LL-IR-1347 M12 plug
Product Introduction:Rugged and stable fiber optic sensor for glass fiber optic optic application, infrared light, PNP output, M12 plug, Robust fiber optic sensor for stable operation performance in various conditions, Continuously adjustable sensitivity, Snap-action clamp lock for easy fiber installation, with excellent ...
|
|
P+F/Accelerometer ACX04-F99-I-V15 outputs 4 mA~20 mA
Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
...
|
|
Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 with a voltage drop of ≤ 2,5 V
Description: Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 Voltage drop≤ 2,5 V, output type: PNP, reverse polarity protection: reverse polarity protection, no-load current: ≤ 12 mA
peculiarity
4 mm, flush
The working distance can be adjusted via a potentiometer
...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F Signal Conditioner S1SD-1AI-1C.H Resistance 50Ω
Introduction: The P+F signal conditioner SC series provides isolation in an extremely compact package and is optimized for the application requirements of the safe area. Connected via screw terminals, according to EN 60715:2001, mounted on a 35 mm DIN mounting rail.
...
|
|
P+F/Capacitive sensor CJ30-50K10-E0123-Y46139 cable 2m
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Optical Fiber Optic Sensor SU19/110/115/123 cable 160 mm
Product Introduction: Classic Series Fiber Optic Sensor, with Display, Main Module, Push-Pull Output, External Teach-in, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) 30μs high-speed mode
Detailed parameters:
We take the guest ...
|
|
P+F/Bi-material sensor UDC-18GM50-255S-3E0
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/73c/76a/136
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR-5360
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Capacitive sensor CBN10-F46-E2-10M core cross-section: 0.14mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Throughbeam GD18 / GV18 /73/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical face, 20m detection distance, red light, light and dark, DC version, 2 PNP outputs, M12 plug, high efficiency line, short M18 plastic housing application, very high detection range, 4 LEDs ...
|
|
P+F Retroreflective Sensor ML100-55/95/102 5m detection range
Description: Retroreflective sensor ML100-55/95/102 photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, light/dark, DC type, NPN output, M8 plug.
...
|
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Triangulation sensor OBT300-R100-2EP-IO-V31-L
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, precise object detection, virtually color-independent, extended temperature range
Our customer-centric service philosophy ...
|
|
Contact
working hours
