P+F/DK20-9, 5/110/124 RGB light

Create Date: 2024-8-30 12:03:23|Source: P+F/Double Blessing

  • Brand:
    P+F/Double Blessing
    Origin:
    Germany
    Price:
    Please contact customer service
    Delivery time:
    Please contact customer service
    Model:
    DK20-9,5/110/124
    Product Introduction
    9.5 mm detection range, RGB light (red, green, blue), on/off, external teach-in, push-pull output, M12 plug.
Product Description
Product introduction: The characteristics of P+F color mark sensor are: low contrast detection under high resolution, short response time; It is not sensitive to the deviation of the height and angle of the detected material; The optical lenses are 90° interchangeable. With a simple push of the TEACH-IN button, the emitter LED automatically selects the best color and automatically adjusts the trigger threshold.

          P+F/DK20-9,5/110/124

  Specifications:
Product Description
Contrast sensor with plastic lens, 9.5 mm detection range, RGB light (red, green, blue), on/off, external teach-in, NPN output, PNP output, M12 plug
General characteristics
Sensor range
9,5 mm ± 3 mm
The type of light source
LED
The type of light source
Visible green/red/blue light, modulated light
Flare manifestations
Rectangle 1 mm x 4 mm ,
Functional safety parameters
Mean time to failure (days)
650 a
Service life (...) Month... days)
20 a
Scope of diagnosis
0 %
Indicator/Action key
Function display
Yellow LED, knob operation: color scale is detected and the light is on, Teach operation: slow flashing, alarm display: fast flashing, unsafe operation
controller
TEACH-IN button
Electrical characteristics
Operating voltage
10 ... 30 V DC
output
Switch type
Turn on when light/dark, switchable, in the order of teaching
Signal output
1 PNP and 1 NPN, short circuit protection, open collector, synchronous switch
Conformity with the system of standards and norms
Meets standards
Product standards
EN Standard 60947-5-2:2007
IEC 60947-5-2:2007
Shock and shock resistance
IEC/EN 60068, half sinusoidal, 40 g in the X, Y, and Z directions
Vibration-resistant
IEC/EN 60068-2-6, sine 10-150 Hz, 5 g in the X, Y, and Z directions
Mechanical properties
Ingress protection
IP67
connect
5-pin M12 x 1 connector
material
enclosure
PC (Makrolon, glass fiber reinforced)
Optical end faces
plastics

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

More on that
P+F Inductive Sensor NBN30-U1-E3 30mm non-flush P+F Inductive Sensor NBN30-U1-E3 30mm non-flush

Introduction: Standard inductive sensor product features: smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, ...

P+F/Capacitive sensor CBN15-F64-A0 has a voltage drop of ≤2V P+F/Capacitive sensor CBN15-F64-A0 has a voltage drop of ≤2V

Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...

P+F through-beam photoelectric sensor OBE10M-18GM60-SE4-V1 P+F through-beam photoelectric sensor OBE10M-18GM60-SE4-V1

Introduction: OBE10M-18GM60-SE4-V1 Thru-beam Photoelectric Sensor Two-color Indication LED; Bright/dark, programmable; Sensitivity regulator to ensure optimal application needs; Degree of protection IP67; Robust cylindrical metal housing M18 x 1. ...

P+F/UB120-12GM-E5-V1 connector M12 P+F/UB120-12GM-E5-V1 connector M12

Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...

P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush

Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.

P+F/UB400-F77-E0-V31 ultrasonic direct detection sensor P+F/UB400-F77-E0-V31 ultrasonic direct detection sensor

Introduction:P+F/P+F/Double Blessing Ultrasonic Direct Detection Sensor UB400-F77-E0-V31 Working Voltage 20 ... 30 V DC, ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90%; Output Type: 1-way switch output E0, NPN, normally open. ...

P+F Capacitive Sensor CJ10-30GK-WS 10mm non-flush P+F Capacitive Sensor CJ10-30GK-WS 10mm non-flush

Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders. ...

P+F/Capacitive sensor CBN10-F46C-EI 7mm P+F/Capacitive sensor CBN10-F46C-EI 7mm

Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders. Give birth...

P+F/IBN4-F29-E0 Inductive Proximity Sensor 4mm Non-flush P+F/IBN4-F29-E0 Inductive Proximity Sensor 4mm Non-flush

Introduction: P+F inductive proximity sensor NBN4-F29-E0 reverse polarity protection, pulse short circuit protection, off-state current 0 ... 0,5 mA Type 0,1 μA At 25 °C and rated voltage ≤ 36 V, the product does not require CCC certification/marking. ...

P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm

Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...

P+F/Triangulation sensor OQT150-R101-2EP-IO 150 mm P+F/Triangulation sensor OQT150-R101-2EP-IO 150 mm

Product Introduction: Switching sensors with measurement core technology have an enhanced range of functions. Based on the Multipixel Technology (MPT) developed by Pepperl + Fuchs, multiple operating modes and switching points can be easily set in a single triangulation sensor. These photoelectric ...

P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V

Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...

P+F/Optical fiber optic sensor SU19.1/110/115 30μs P+F/Optical fiber optic sensor SU19.1/110/115 30μs

Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode. ...

P+F/Throughbeam GD18 / GV18 /73/120 P+F/Throughbeam GD18 / GV18 /73/120

Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical face, 20m detection distance, red light, light and dark, DC version, 2 PNP outputs, M12 plug, high efficiency line, short M18 plastic housing application, very high detection range, 4 LEDs ...

P+F/Triangulation sensor OBT300-R100-2EP-IO-V31-L P+F/Triangulation sensor OBT300-R100-2EP-IO-V31-L

Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, precise object detection, virtually color-independent, extended temperature range Our customer-centric service philosophy ...

P+F Signal Conditioner S1SD-1AI-1C.H Resistance 50Ω P+F Signal Conditioner S1SD-1AI-1C.H Resistance 50Ω

Introduction: The P+F signal conditioner SC series provides isolation in an extremely compact package and is optimized for the application requirements of the safe area. Connected via screw terminals, according to EN 60715:2001, mounted on a 35 mm DIN mounting rail. ...

P+F Zener Barrier Z System 35 mm DIN rail P+F Zener Barrier Z System 35 mm DIN rail

Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection. Mounted directly on a 35 mm DIN rail. With the accessory, the required grounding can be carried out directly on the DIN mounting rail. Product Details Zen ...

P+F/Print Marks Contrast Sensor DK12-11-IO/92/136 M12 plug P+F/Print Marks Contrast Sensor DK12-11-IO/92/136 M12 plug

Introduction: Colour mark sensors can be used to detect registered trademarks in printing, converting, packaging, food, beverage, and pharmaceutical processes for sorting, positioning, and quality control of goods. The P+F color scale sensor is characterized by low contrast detection at high resolution, loud ...

P+F/Through-beam photoelectric sensor BB10-P/59/76b/103/115e P+F/Through-beam photoelectric sensor BB10-P/59/76b/103/115e

Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...

P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V

Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top