Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications:
General characteristics | Sensing range | 15 ... 200 mm | Adjustment range | 20 ... 200 mm | Blind spots | 0 ... 15 mm | Standard target plates | 100 mm x 100 mm | Transducer frequency | Approximately 400 kHz | Response delay | About 30 ms | Indicator/Action key | Yellow LED | Displays the illumination status
Flashing: Target detected under the TEACH-IN function | Red LED | Solid red light: An error occurred
Flashing red light: No target detected under the TEACH-IN function | Electrical characteristics | Operating voltage | 10 ... 30 V DC, ripple 10%SS | No-load current | ≤ 30 mA | input | Enter the type | 1 TEACH_IN input
Working distance 1: -UB ... +1 V, Working distance 2: +6 V ... +UB
Input impedance: > 4,7 kΩ TEACH-I pulse: ≥ 1 s | output | Output type | 1 switch output, PNP NO / NC, programmable | Rated operating current | 100 mA, short-circuit/overload protection | Default setting | Switching point A1 20 mm Switching point A2 200 mm | Voltage drop | ≤ 3 V | Repeatability | ≤ 1 % | Switching frequency | ≤ 13 Hz | Hysteresis range | 1% of set working distance | Temperature drift | ± 1,5 % of full-scale value | Licensing and Certification | UL recognized | cULus recognized, Class 2 power supply | CCC certified | Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark. | Surroundings | Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | Mechanical properties | Connection type | Connector M12 x 1, 4-pin | Ingress protection | IP67 | material | | | enclosure | Brass is nickel-plated | | Transducers | epoxy/hollow glass sphere mixture; Polyurethane foam, outer shell PBT | weight | 25 g |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Inductive sensor NBB3-V3-Z4 3 mm flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR-5360
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F/Beam Ultrasonic Barrier UBEC300-18GH40-SE2-V1
Introduction: An ultrasonic through-beam sensor consists of a transmitter and a receiver mounted facing each other. Ultrasonic through-beam sensors work by emitting sound waves from the transmitter to the receiver to detect objects through the sound beam being interrupted by the target object. The emitter produces ultrasonic ...
|
|
P+F Inductive Sensor NBB20-U1-A2 4-wire DC
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Capacitive sensor CBN15-F64-A2 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Double Sheet Sensor UDC-18GM-400-3E1-Y194142
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Switching Amplifier KFD2-SOT3-Ex2 24V DC
Introduction: The K-series isolation barriers provide users with a comprehensive solution to ensure reliable & economical signal transmission between field devices and control rooms. Whether the user selects a single signal isolation module or performs large-scale system integration, the K Series ...
|
|
The P+F/GIF sensor GLD3-RT /115/147 is programmable
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Inductive sensor NBB8-18GM50-E0-M 8mm
Summary: Inductive proximity sensors are the product of choice for most applications that require the precise and non-contact detection of metal objects in machinery or automation. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality inductors.
|
|
P+F/UB1000-18GM75-E5-V15
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F/Fork sensor GL30-IR / 32 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F/Inductive sensor NBB8-18GM50-E0 8mm flush
Introduction:P+F/Beijiafu inductive sensor NBB8-18GM50-E0 has a detection distance of 8mm and is installed flush; It has a longer working distance; Extended temperature range; -40 to +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F/GZ Photocell Sensor GL5-T / 25 / 45A / 115E Slot Width 5mm
Product Introduction: Miniature Slot Sensor for Small Part Inspection, T-Design, 5 mm Slot Width, IR Lamp, NPN Output, Lit, 150 mm Fixed Cable with JST Plug, 3-Pin, Miniature Design, Optimized for Small Part Inspection, High Conversion Frequency, Simple Installation
|
|
P+F through-beam sensor OBE20M-R100-S2EP-IO-L
Description: P+F/Laser through-beam sensor OBE20M-R100-S2EP-IO-L Small design, multifunctional mounting options, multiple frequencies to prevent mutual interference (anti-crosstalk), high degree of protection IP69K.
...
|
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40-SE2-V1 PNP
Product introduction: The working principle of ultrasonic through-beam sensor is to detect an object by emitting sound waves from the transmitter to the receiver and being interrupted by the sound beam by the target object. The transmitter generates an ultrasonic signal that is received and evaluated by the receiver. When the ultrasonic beam is attenuated or interrupted by an object, the receiver ...
|
|
P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 20 g
Description: The P+F/P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 with its ultra-small housing design and 45° cable outlet provides maximum installation freedom, even in very space-constrained conditions.
Product Features ...
|
|
P+F/Double Blessing Timer KC-LCDC-48-2R-230VAC 142g
Introduction: P+F Timer KC-LCDC-48-2R-230VAC easy-to-read, backlit 2-line LCD display with icons for pre-selection and the status of both outputs; Add/subtract via 2 independent inputs, degree of protection IP65 (front).
...
|
|
Contact
working hours
