Description: OBE500-R2F-SE2 through-beam photoelectric sensor, low profile design, space-saving M2 mounting, 500 mm detection range, red light, dark on, PNP output, fixed cable.
Product parameters
Effective detection distance :0 ... 500 mm
Detection range limit: 700 mm
Light source: LED
Light source type: Modulated visible red light, 630 nm
LED Hazard Rating Marking: Exempt Group
Angular deviation : approx. 2°
Object size : type from 1,5 mm
Spot diameter: approx. 90 mm and 500 mm apart
Divergence angle : approx. 5°
Optical end face: direct forward beam
Ambient light limit: EN 60947-5-2 : 25000 Lux
Operating voltage :10 ... 30 V DC
No-load current: < 10 mA
Protection Class: III
Switch Type: Normally open contact / Switch-on when dark
Signal output: 1 PNP output, short circuit protection, reverse polarity protection, open collector
Switching voltage: max. 30 V DC
Switching current: max. 50 mA, impedance load
Voltage drop : ≤ 1,5 V DC
Switching frequency: approx. 1 kHz
Response time: 500 μs
Ambient temperature: -20 ... 60 °C (-4 ... 140 °F)
Storage temperature :-20 ... 70 °C (-4 ... 158 °F)
Housing width: 12 mm
Housing height : 25,5 mm
Housing depth : 4,1 mm
Degree of protection: IP67
Connection: 2 m fixed cable
material
Housing :P C
Optical end-faces :P UMA
Cable :P UR
Mass: approx. 20 g per sensor
Tightening torque of the tightening screw: 1 Nm
Cable length: 2 m
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the P+F/Bulb photoelectric sensor OBE500-R2F-SE2 500 μs products, if you are interested in P+F/Bulb photoelectric sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience. |
More on that
|
P+F/Capacitive sensor CBN5-F46-E0-Y286690 distance 5mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBB8-18GK75-E2-V1 with a diameter of 18 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Through-beam photoelectric sensor BB10-P/59/76b/103/115e
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/UB120-12GM-E5-V1 connector M12
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F/Inductive sensor NCB1,5-8GM25-N0-Y295009
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR...
|
|
P+F/Inductive sensor NBN4-12GM50-E2-C-V1 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Fiber Optic Sensor MLV41-LL-IR-1347 M12 plug
Product Introduction:Rugged and stable fiber optic sensor for glass fiber optic optic application, infrared light, PNP output, M12 plug, Robust fiber optic sensor for stable operation performance in various conditions, Continuously adjustable sensitivity, Snap-action clamp lock for easy fiber installation, with excellent ...
|
|
P+F through-beam photoelectric sensor GD18-S/GV18-S/73/120
Description: Thru-beam sensor, miniature design, light forming slit of miniature sensor, easy to use, very bright, high visible light point, all-metal threaded mounting, high-efficiency series mounted in a short M18 plastic housing, suitable for standard applications.
...
|
|
P+F/Capacitive sensor CJ4-12GK-N-5M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN15-30GK60-E2-5M with a diameter of 30mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Triangulation sensor OBT300-R100-2EP-IO-V31-L
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, precise object detection, virtually color-independent, extended temperature range
Our customer-centric service philosophy ...
|
|
P+F Safety Barrier Module H Series 16 slots
Introduction: The H-Series can be connected to hazardous area field devices and control systems by mounting multiple isolation barriers on terminal boards. Compared to a single interface module, the terminal block greatly simplifies wiring and saves costs. The terminal block is equipped with a sturdy plastic enclosure for quick and secure installation in the cabinet.
|
|
P+F Zener Barrier Z System 35 mm DIN rail
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection. Mounted directly on a 35 mm DIN rail. With the accessory, the required grounding can be carried out directly on the DIN mounting rail.
Product Details
Zen ...
|
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR / 110 /124/167
Product Introduction: Rugged Diffuse Mode Sensor for Monitoring Web Breakage, Compact Housing Design, Foreground and Background Suppression, 60mm Detection Range, IR Light, Push-Pull Output, Weak Signal Output, M12 Plug, Web Break Control and Special Equipment for Printing Machinery, Contamination ...
|
|
The P+F/GIF sensor GLD3-RT /115/147 is programmable
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F/Beijiafu NBB2-6,5M25-E2-V3 inductive sensor
Product introduction: P+F Inductive sensor NBB2-6,5M25-E2-V3 2 mm flush Longer working distance Extended temperature range -40 ... +85 °C
Specifications:
Switch function
Normally open (NO)
Output type
PNP
Rated working distance
2 mm
Installation...
|
|
P+F/Inductive sensor NBB8-18GM50-E0-M 8mm
Summary: Inductive proximity sensors are the product of choice for most applications that require the precise and non-contact detection of metal objects in machinery or automation. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality inductors.
|
|
P+F/Print Marks Contrast Sensor DK12-11-IO/92/136 M12 plug
Introduction: Colour mark sensors can be used to detect registered trademarks in printing, converting, packaging, food, beverage, and pharmaceutical processes for sorting, positioning, and quality control of goods. The P+F color scale sensor is characterized by low contrast detection at high resolution, loud ...
|
|
Contact
working hours
