Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change to realize the conversion of non-electricity to electricity.
Product Features:
Smooth or threaded stainless steel cylindrical housing;
reverse polarity protection and short circuit protection;
LED status indicates M8, M12 connector connection or terminal wiring mode;
PVC, PUR or silicon cable outlet;
2-wire, 3-wire, 4-wire DC, AC, NAMUR output and AS-I bus output.
Product parameters
Switch function: normally open (NO)
Output Type: PNP
Rated working distance: 4 mm
Non-flush mounting
Output Polarity: DC
Guaranteed working distance: 0 - 3.24 mm
Reduction factor: rAl 0.5
Reduction factor: rCu 0.4
Reduction factor: R304 0.8
rating
Working voltage - 10-30 volts
Switching frequency: 0 - 1200 Hz
Reverse Polarity Protection: Reverse Polarity Protection
Short Circuit Protection: Pulse
Voltage drop: ≤3V
Operating current: 0-200 mA
Off-state current: 0-0.5 mA
No-load supply current: ≤17 mA
Switching status: Indicator porous LED, yellow
Licensing & Certification:
UL listed cULus list, generic
CSA certification cCSAus is listed and universal
Surroundings
Ambient temperature: -25 - 70 degrees Celsius (-13 - 158 degrees Fahrenheit)
Mechanical properties
Connection type: connector M12 x 1,4-pin
Housing material: stainless steel: 1.4305/AISI 303
Sensing surface: PBT
Case diameter: 12 mm
Degree of protection: IP67
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces P+F/Double Blessing Inductive Sensor NBN4-12GM50-E2-V1-Y89925 products, if you are interested in P+F/Double Blessing Inductive Sensor, also please contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Radiator LA31/LK31/31/115 LEDs
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F/Capacitive sensor CJ30-50K10-E0123-Y46139 cable 2m
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Fork sensor GL30-IR / 32 / 40A / 98A
Product introduction: There is a special through-beam sensor in our products called fork sensor. It is mainly used in places where the measurement distance is short. Since only one device requires wiring, fork sensors have the advantage of being easy to install compared to standard control sensors. ...
|
|
P+F capacitive sensor CBB10-30GKK-A2 10mm flush
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Beam Ultrasonic Barrier UBE4000-30GM-SA2-V15 nickel-plated brass
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F/GZ Photocell Sensor GL5-T / 25 / 45A / 115E Slot Width 5mm
Product Introduction: Miniature Slot Sensor for Small Part Inspection, T-Design, 5 mm Slot Width, IR Lamp, NPN Output, Lit, 150 mm Fixed Cable with JST Plug, 3-Pin, Miniature Design, Optimized for Small Part Inspection, High Conversion Frequency, Simple Installation
|
|
P+F/Capacitive sensor CBN15-F64-A0-V31 non-flush 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Optical fiber optic sensor SU19.1/110/115 30μs
Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode.
...
|
|
P+F/Capacitive sensor CJ10-30GM-WS current: 5~200mA
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40-SE2-V1 PNP
Product introduction: The working principle of ultrasonic through-beam sensor is to detect an object by emitting sound waves from the transmitter to the receiver and being interrupted by the sound beam by the target object. The transmitter generates an ultrasonic signal that is received and evaluated by the receiver. When the ultrasonic beam is attenuated or interrupted by an object, the receiver ...
|
|
P+F/Inductive sensor NBB8-18GM50-E0 8mm flush
Introduction:P+F/Beijiafu inductive sensor NBB8-18GM50-E0 has a detection distance of 8mm and is installed flush; It has a longer working distance; Extended temperature range; -40 to +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F/Inductive sensor NBN4-12GM50-E2-C-V1 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Capacitive Proximity Sensor CBN15-F64-E2 15mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Capacitive sensor NTK-H has a conductor cross-section of 0,34 mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F photoelectric sensor M100/MV100-RT/35/76a/95/103
Description: The through-beam sensors are designed in a miniature design with a slit in the light of the miniature sensor, which is easy to use, very bright, with a high visible light point, full metal threaded mounting, and the high-efficiency series is mounted in a short M18 plastic housing for standard applications.
...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P4 4-wire
Introduction:P+F capacitive sensor CJ40-FP-A2-P4 series rectangular, housing material is POM / metal, output type 4 wires, non-flush mounting, DC voltage type, screw terminal connection type, protection class IP65.
...
|
|
P+F sensor NBN40-L2-E0-V1 40 mm non-flush
Introduction: NBN40-L2-E0-V1 is a kind of switch sensor (i.e., non-contact switch), which has the characteristics of travel switch and micro switch, and has sensing performance, and reliable action, stable performance, fast frequency response, long application life, strong anti-interference ability, etc.
|
|
P+F/DK10-LAS/35/49 Laser Class 2
Product Introduction: Print Mark Contrast Sensor, 800mm Detection Range, Red Laser, Laser Level 2, Light/Dark On, Sensitivity Adjuster, NPN Output, PNP Output, M12 Plug, Laser Print Mark Contrast Sensor, For Recording Very Small Print Marks, Laser, etc.
|
|
Contact
working hours
