Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, fixed cable, compact design, easy to use, clear LED indication, power supply, switching status, stable output, all-metal threaded mounting, extremely bright and clear light spot.
Product Description | Retroreflective sensor with polarization filter, M18 threaded housing design, plastic housing, front optical face, 4 m detection range, red light, on/dark, DC version, 2 PNP output, fixed cable |
General specifications | Effective detection range | 0 ... 4 meters | Threshold detection range | 5.5 meters | light source | LED | Light | Modulated visible red light, 640 nm | Polarization filters | be | Spot diameter | About. 200 mm at 5.5 m | Divergence angle | About. 2° | Functional safety-related parameters | MTTF d | 920 a | Task Time (TM) | 20 a | Diagnostic Coverage (DC) | 0％ | Indicators/means of operation | Functional metrics | LED yellow: lights up when the beam is received; Flashes when stability control is lost; Turns off when the beam is interrupted | Electrical Specifications | Operating voltage | 10 ... 30 V DC | yield | Toggle the type | Light/Dark | Signal output | 2 PNPs, complementary, short-circuit protected, open-circuit collector | Compliance with standards and directives | Standards Compliance | | | Product standards | EN 60947-5-2：2007
IEC 60947-5-2：2007 | Mechanical Specifications: | Ingress protection | IP67 | connect | 2 m fixed cable | material | | | housing | PC | | Optical end faces | PMMA | | cable | PVC |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
P+F/Inductive sensor NBN4-12GM50-E2-V1-Y89925
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/GZ Photocell Sensor GL5-T / 25 / 45A / 115E Slot Width 5mm
Product Introduction: Miniature Slot Sensor for Small Part Inspection, T-Design, 5 mm Slot Width, IR Lamp, NPN Output, Lit, 150 mm Fixed Cable with JST Plug, 3-Pin, Miniature Design, Optimized for Small Part Inspection, High Conversion Frequency, Simple Installation
|
|
P+F/Capacitive sensor CJ6-18GK-N with a conductor cross-section of 0,75mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CBB10-30GKK-A2 10mm flush
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F Singleturn Absolute Encoder AVS58-H Photoelectric Sampling
Introduction: For a singleturn encoder, one revolution of the encoder (360) can be divided into a maximum of 65,536 measurement steps (16 bits), and after one revolution, the code value will return to the starting position. The electrical components of the encoder do not remember the number of revolutions.
...
|
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/DK20-9, 5/110/124 RGB light
Product introduction: The characteristics of P+F color mark sensor are: low contrast detection under high resolution, short response time; It is not sensitive to the deviation of the height and angle of the detected material; The optical lenses are 90° interchangeable. Just press the TEACH-IN button and the emitter LED will automatically select the best ...
|
|
P+F/Retroreflective Area Sensor RLG28-55 / 115B / 136
Product Introduction: Retroreflective area sensor with 6 beams in a widely used standard photoelectric housing, red light, 4 m detection range, switchable bright/dark, push-pull output, M12 plug, reflective area sensor housing with 6 beams in a standard photoelectric sensor, connector and ...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/76a/115/136
Product Description: Thru-beam sensor, 30 m detection range, red, low, DC version, 2 push-pull outputs, transmitter off, fixed cable, high visibility LED, powerful push-pull output, compact and stable housing, degree of protection II
Our customer-centric ...
|
|
P+F/Capacitive Sensor CBB10-30GKK-W Sensing Surface ABS
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Inductive Sensor NBB15-30GM50-E0 15mm
Introduction: P+F Inductive Sensor NBB15-30GM50-E0 15mm flush; Longer working distance; Extended temperature range -40 ... +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F/MLV11-8-500-Ex/40b/112 60g
Description: The P+F/Photoelectric Sensor MLV11-8-500-Ex/40b/112 is ATEX certified for Zone 1 (gas); Intrinsically safe, explosion-proof operating specification IA IIC T6 Gb; Diffuse photoelectric sensors for standard applications; Sensitivity adjustable.
...
|
|
P+F/Accelerometer ACX04-F99-I-V15 outputs 4 mA~20 mA
Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
...
|
|
P+F/Capacitive sensor CJ2-18GK-N 2mm non-flush mounting
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 with a voltage drop of ≤ 2,5 V
Description: Germany P+F/Capacitive sensor CBB4-12GH60-E0-V1 Voltage drop≤ 2,5 V, output type: PNP, reverse polarity protection: reverse polarity protection, no-load current: ≤ 12 mA
peculiarity
4 mm, flush
The working distance can be adjusted via a potentiometer
...
|
|
P+F/Capacitive Proximity Sensor CBN15-F64-E2 15mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F through-beam sensor OBE20M-R100-S2EP-IO-L
Description: P+F/Laser through-beam sensor OBE20M-R100-S2EP-IO-L Small design, multifunctional mounting options, multiple frequencies to prevent mutual interference (anti-crosstalk), high degree of protection IP69K.
...
|
|
P+F/Capacitive sensor CBN15-30GK60-A0 NPN15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CJ40-FP-A0-P1 has a voltage drop of ≤ 2.8 V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Capacitive Sensor CBN5-F46-E2-Y70121258
Introduction: P+F Capacitive sensor CBN5-F46-E2-Y70121258 rated working distance of 5 mm, non-flush mounting; DC 3 wire with additional wire for teaching; Flat housing; Fixing grooves for cable ties; Through-holes for screw mounting.
...
|
|
Contact
working hours
