Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
General characteristics
Switching Function: Normally Open/Normally Closed (NO/NC)
Output-type two-wire system
Rated working distance 10 mm
Install flushing
Output polarity AC
Guaranteed working distance: 0~8.1mm
Rating:
Installation conditions
A: 0 mm
B: 0 mm
C: 20 mm
F: 40 mm
Working voltage: 20~250 VA
Switching frequency: 0~50 Hz
Hysteresis 2~20%
Voltage drop: ≤7V
Operating current: 0~500 mA
Off state current: 0~1.7 mA
Operating voltage indicator LED, green
Switch status indicator LED, red
Indicator/Operation Keys:
Potentiometer sensitivity adjustment
Surroundings:
Ambient temperature: -25~70 degrees Celsius (-13~158 degrees Fahrenheit)
Mechanical Properties:
Connecting screw terminals
Core cross-section ≤: 2.5 mm2
Housing Material: ABS
Induction surface: ABS
Case diameter: 30 mm
Degree of protection: IP67
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces P+F/Double Capacitive Sensor CBB10-30GKK-W products, if you are interested in P+F/Double Capacitive Sensor, also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience. |
More on that
|
P+F/Bi-material sensor UDC-18GM50-255S-3E0
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Throughbeam GD18 / GV18 /73/120
Product Introduction: Thru-beam sensor, M18 threaded housing design, plastic housing, front optical face, 20m detection distance, red light, light and dark, DC version, 2 PNP outputs, M12 plug, high efficiency line, short M18 plastic housing application, very high detection range, 4 LEDs ...
|
|
P+F/Diffuse Reflex Mode Sensor GLV18-8-200 /115/120
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range.
Our customer-centric service philosophy ...
|
|
P+F/2D Laser Scanner R2000 5-pin M12x1 connector
Product Introduction: The R2000 series combines standard sensors with the latest measurement methods. The R2000 2D laser scanner (also known as 2D LiDAR sensor) is equipped with the innovative Pulse Ranging Technology (PRT) to deliver reliable and extremely precise measurement results with 360° gap-free ...
|
|
P+F Capacitive Sensor CBN5-F46-E2-Y70121258
Introduction: P+F Capacitive sensor CBN5-F46-E2-Y70121258 rated working distance of 5 mm, non-flush mounting; DC 3 wire with additional wire for teaching; Flat housing; Fixing grooves for cable ties; Through-holes for screw mounting.
...
|
|
P+F/Inertial Measurement Device IMU360D-F99-B20-V15
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/UB100-F77-E0-V31 ultrasonic direct detection sensor
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications:
...
|
|
P+F/UB1000-18GM75-E5-V15
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F/Optical Fiber Optic Sensor SU19/110/115/123 cable 160 mm
Product Introduction: Classic Series Fiber Optic Sensor, with Display, Main Module, Push-Pull Output, External Teach-in, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) 30μs high-speed mode
Detailed parameters:
We take the guest ...
|
|
P+F/Inductive sensor NBB3-V3-Z4 3 mm flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/Pixel Fork Sensor GL5-J / 28A / 115 J design
Product introduction: Miniature photoelectric slot sensor is used to detect small parts, J-shaped design, fork width 5mm, infrared light, NPN output, fixed cable, miniature design, optimized for detecting small parts, high switching frequency, simple and quick installation, clearly visible LED function display.
...
|
|
P+F/Capacitive Proximity Sensor CBN15-F64-E2 15mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Inductive sensor NBN30-U10-E2 has a working distance of 30 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Inductive sensor NBB8-18GM50-E0 8mm flush
Introduction:P+F/Beijiafu inductive sensor NBB8-18GM50-E0 has a detection distance of 8mm and is installed flush; It has a longer working distance; Extended temperature range; -40 to +85 °C; Extended operating voltage range; With a variety of mounting options, it is flexible to use.
...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F/Reflector Type Photoelectric Switches ML100-55/103/115 Compact
Product Introduction:Retroreflective Plate Sensor with Polarization Filter, Plastic Housing, 5 m Detection Range, Red Light, Adjustable Sensitivity, Switch-On When Bright/Dark, DC Type, PNP Output, Fixed Cable, Compact Design, Easy to Use, Clear LED Indication, Power Supply, Switching Status, Stable ...
|
|
P+F magnetic field sensor MMB60-12H50-E2-V1 60 mm
Introduction: Magnetic sensors with M12 cylindrical housing are used in conventional magnet detection. A non-contact detection sensor for piston position is also available for steel hydraulic cylinders. These sensors are easy to install and do not require a mounting slot or installation in the cylinder.
|
|
P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F photoelectric sensor M100/MV100-RT/35/76a/95/103
Description: The through-beam sensors are designed in a miniature design with a slit in the light of the miniature sensor, which is easy to use, very bright, with a high visible light point, full metal threaded mounting, and the high-efficiency series is mounted in a short M18 plastic housing for standard applications.
...
|
|
Contact
working hours
