Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Product parameters
Switches: Functions complement each other
Output Type: NPN
Rated working distance: 15mm
Mounting: Not flush
Output polarity DC
Guaranteed working distance: 0 - 12.1 mm
Rating:
Installation conditions
18 mm
B 10 mm
C 30 mm
60 mm
Working voltage: 10-30 VDC
Switching frequency: 0 - 10 Hz
Reverse Polarity ProtectionReverse Polarity Protection
Short-circuit protection pulses
Voltage drop: ≤ 2.8V
The working current is 0-200 mA
Typical value of 0 – 0.5 mA for the shutdown state. 0.1 μA at 25°C
The shutdown state current is TU = 40°C, and the switching element is ≤ 100μA when the switching element is turned off
No-load supply current: ≤20mA
Switch status indicator LED, yellow
Indicator/Operation Keys:
Potentiometer sensitivity adjustment
Licensing & Certification:
UL listed cULus list, generic
CSA certification cCSAus is listed and universal
CCC certified products with a voltage rating of ≤36 V do not require CCC certification/marking
Surroundings:
Ambient temperature: -25 - 70 degrees Celsius (-13 - 158 degrees Fahrenheit)
Storage temperature: -40-85 degrees Celsius (-40-185 degrees Fahrenheit)
Mechanical Properties:
PVC connection cable, 2 m
Core cross-section: 0.75 mm2
Housing Material: PBT
Sensing surface: PBT
Case diameter: 30 mm
Degree of protection: IP67
This article introduces P+F/Double Capacitive Sensor CBN15-30GK60-A0 products, if you are interested in P+F/Double Capacitive Sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business! |
More on that
|
P+F through-beam photoelectric sensor OBE10M-18GM60-SE4-V1
Introduction: OBE10M-18GM60-SE4-V1 Thru-beam Photoelectric Sensor Two-color Indication LED; Bright/dark, programmable; Sensitivity regulator to ensure optimal application needs; Degree of protection IP67; Robust cylindrical metal housing M18 x 1.
...
|
|
P+F/Reflector Type Photoelectric Switches ML100-55/103/115 Compact
Product Introduction:Retroreflective Plate Sensor with Polarization Filter, Plastic Housing, 5 m Detection Range, Red Light, Adjustable Sensitivity, Switch-On When Bright/Dark, DC Type, PNP Output, Fixed Cable, Compact Design, Easy to Use, Clear LED Indication, Power Supply, Switching Status, Stable ...
|
|
P+F Inductive Positioning System PMI120-F90-IU-IO-V15
Introduction:P+F Inductive Positioning System PMI120-F90-IU-IO-V15 Reverse Polarity Protection, Analog Current or Voltage Output, Programmable; Linearity ranges from 1 to 119 mm; PBT, stainless steel 1.4571, brass, nickel-plated housing.
...
|
|
P+F/OBE20M-R100-S2EP-IO-V31-L through-beam type
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F capacitive sensor CBN15-18GS75-E2-V1 is non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBN4-12GM50-E2-C-V1 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Retroreflective Area Sensor RLG28-55 / 115B / 136
Product Introduction: Retroreflective area sensor with 6 beams in a widely used standard photoelectric housing, red light, 4 m detection range, switchable bright/dark, push-pull output, M12 plug, reflective area sensor housing with 6 beams in a standard photoelectric sensor, connector and ...
|
|
P+F/Logic Control Device 14bit Resolution
Introduction: Logic control units are widely used in the automation industry. In practice, they are capable of detecting digital or analog signals, displaying them and monitoring them. In order to solve the conversion and application between signals, we provide digital display meters, counters ...
|
|
P+F/Ultrasonic sensor UC6000-30GM-2EP-IO-V15
Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications ...
|
|
P+F/Inductive sensor NBN30-U10-E2 has a working distance of 30 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F capacitive sensor CJ10-30GM-WO with a working distance of 10mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F inductive sensor NBB2-V3-E2 normally open 2 mm
Introduction: Inductive proximity sensors are the most advanced products for most applications, ranging from mechanical instruments and automation equipment to the need for high-precision, non-contact detection of metal targets. As a market leader for this type of product, we offer our customers innovative and high-quality inductive ...
|
|
P+F/Capacitive sensor CBN15-F64-A2-0, 3M-V1
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Multiturn Absolute Encoder AVM58-H
Introduction: In this construction, the gear structure is added on the basis of the singleturn code disc, through these interconnected gears, we can measure up to 16,384 turns (14 bits), so that the total accuracy of the encoder is 16 bits (single turn) plus 14 bits (number of turns), or the total precision ...
|
|
P+F/UB1000-18GM75-E5-V15
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F/Gasford accelerometer F99 series measuring range -2~+ 2 g
Introduction: The F99 series of accelerometers is a complex mechanical system that uses accelerometers to ensure accurate real-time monitoring of the machine's vibrations. Accelerometers detect wear and tear on machine components and any critical operating conditions. Thus guaranteeing the execution of corrective actions to avoid potential damages.
|
|
P+F OBE12M-R100-S2EP-IO through-beam photoelectric sensor
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F/Diffuse Reflex Mode Sensor GLV18-8-200 /115/120
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range.
Our customer-centric service philosophy ...
|
|
P+F Zener Barrier Z System DIN rail mounting
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection
Product Details
Zener barriers provide cost-effective explosion protection for a wide range of applications in process automation systems. Transferred to a dangerous place ...
|
|
P+F/Inductive sensor NBB2-12GM50-E2-V1 2 mm
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
Contact
working hours
