Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. This proximity switch detects not only conductors, but also liquids and powders that can be insulated.
Product Specifications:
Switch Function: Normally Open (NO)
Output Type: NAMUR
Rated working distance: 2 mm
Installation: Non-flush
Reliable operating distance :0 ... 1,44 mm
Output Type: 2-wire
Rating:
Installation conditions
A 15 mm
B 30 mm
C 20 mm
F 120 mm
Rated voltage: 8,2 V (Ri approx. 1 kΩ)
Operating voltage :7 ... 12 V
Switching frequency: 0 ... 1 Hz
Current consumption
Measuring plate not detected: ≤ 1 mA
Measuring plate detected: ≥ 2,4 mA
Functional safety parameters
Mean time to failure (days): 5030 a
Service life (...) Month... day): 20 a
Diagnostic range: 0 %
Consistency with standards and norms:
Meets standards
NAMUR EN 60947-5-6:2000
IEC 60947-5-6:1999
FM certification
Control chart: 116-0165
UL Listed: cULus Listed, general requirements
CSA Listed: cCSAus Listed, General Purpose
CCC approval: Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark.
Surroundings
Ambient temperature: -25 ... 70 °C （-13 … 158 °F）
Mechanical properties
Connection type : cable PVC, 2 m
Conductor cross-section: 0,75 mm2
Housing material :P BT
Sensing surface :P BT
Degree of protection: IP68
cable
Bend radius: > 10 x cable diameter
Grade: 1G; 2G; 1D
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces P+F/Double Capacitive Sensor CJ2-18GK-N products, if you are interested in P+F/Double Capacitive Sensor, also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience. |
More on that
|
P+F/Fiber Optic Sensor MLV41-LL-IR-1347 M12 plug
Product Introduction:Rugged and stable fiber optic sensor for glass fiber optic optic application, infrared light, PNP output, M12 plug, Robust fiber optic sensor for stable operation performance in various conditions, Continuously adjustable sensitivity, Snap-action clamp lock for easy fiber installation, with excellent ...
|
|
P+F/Beam Ultrasonic Barrier UBEC300-18GH40-SE2-V1
Introduction: An ultrasonic through-beam sensor consists of a transmitter and a receiver mounted facing each other. Ultrasonic through-beam sensors work by emitting sound waves from the transmitter to the receiver to detect objects through the sound beam being interrupted by the target object. The emitter produces ultrasonic ...
|
|
P+F/Double Sheet Sensor UDC-18GM-400-3E1-Y194142
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR / 110 /124/167
Product Introduction: Rugged Diffuse Mode Sensor for Monitoring Web Breakage, Compact Housing Design, Foreground and Background Suppression, 60mm Detection Range, IR Light, Push-Pull Output, Weak Signal Output, M12 Plug, Web Break Control and Special Equipment for Printing Machinery, Contamination ...
|
|
P+F Incremental Rotary Encoder 10 - 2133 X
Introduction: The speed of an incremental encoder is calculated by the number of pulses measured per unit of time. To measure angles and positions, it is common to start counting from a starting reference point. A dual-channel output encoder that is a two-channel encoder with two ...
|
|
P+F capacitive sensor CJ10-30GM-WO with a working distance of 10mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F/Inductive sensor NBN30-L2-E2-V1 30 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for standard inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output ...
|
|
P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 20 g
Description: The P+F/P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 with its ultra-small housing design and 45° cable outlet provides maximum installation freedom, even in very space-constrained conditions.
Product Features ...
|
|
P+F/Beam Ultrasonic Barrier UBE4000-30GM-SA2-V15 nickel-plated brass
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F/OBE20M-R100-S2EP-IO-V31-L through-beam type
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Inductive sensor NBN4-12GM50-E2-C-V1 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/UB400-F77-E0-V31 ultrasonic direct detection sensor
Introduction:P+F/P+F/Double Blessing Ultrasonic Direct Detection Sensor UB400-F77-E0-V31 Working Voltage 20 ... 30 V DC, ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90%; Output Type: 1-way switch output E0, NPN, normally open.
...
|
|
P+F/Capacitive sensor CJ10-30GM-WS current: 5~200mA
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CJ6-18GK-N-Y22734 rated voltage 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Sensor NBN3-F31K2-E8-B43-S 2.5 mm
Introduction: P+F/Sensor NBN3-F31K2-E8-B43-S is mounted directly on a standard actuator, waterproof housing, suitable for outdoor use, temperature range -40 ... 167 °F (-40°C to 75°C), energized LED, LED indicating sensor and solenoid status switching, mating end ...
|
|
P+F through-beam photoelectric sensor OBE10M-18GM60-SE4-V1
Introduction: OBE10M-18GM60-SE4-V1 Thru-beam Photoelectric Sensor Two-color Indication LED; Bright/dark, programmable; Sensitivity regulator to ensure optimal application needs; Degree of protection IP67; Robust cylindrical metal housing M18 x 1.
...
|
|
P+F/Capacitive sensor CCN5-F46A-E1/E3 non-flush 5mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/MLV11-8-500-Ex/40b/112 60g
Description: The P+F/Photoelectric Sensor MLV11-8-500-Ex/40b/112 is ATEX certified for Zone 1 (gas); Intrinsically safe, explosion-proof operating specification IA IIC T6 Gb; Diffuse photoelectric sensors for standard applications; Sensitivity adjustable.
...
|
|
Contact
working hours
