Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
Product Description | Six-axis inertial measurement device |
General characteristics | type | Inertial measurement device | Measuring range | Acceleration: ± 2 g
Inclination: 0 ... 360 °
Rotation rate: ± 250 °/s | Static accuracy | ≤ ± 0.5° | Dynamic accuracy | Linear acceleration: ≤ ± 0.5 ° bis 0.5 m/s2
Rotational motion: ≤ ± 1.5 ° bis 100 °/s | resolution | 0,01 ° | Repeatability | ≤ 0,1 ° | Cycle time | Internal 10 ms | Temperature drift | max. ± 1.5° (-40 ... 85 °C (-40 ... 185 °F)) | Functional safety parameters | Mean time to failure (days) | 530 a | Service life (...) Month... days) | 10 a | Scope of diagnosis | 0 % | Indicator/Action key | Run the display | Green LED | Status indicator | Yellow LED | Error alarm display | Red LED | Electrical characteristics | Operating voltage | 5 ... 30 V DC | No-load current | ≤ 80 mA | Power loss | ≤ 0,6 W | interface | Interface type | CAN bus, according to SAE J1939 protocol | Transmission rate | 10 ... 1000 kBit/s, programmable | Node address | 0 ... 253 , programmable | Termination resistor | exterior | Cycle time | The output time interval is programmable | Conformity with the system of standards and norms | Meets standards | | | Shock and shock resistance | DIN EN 60068-2-27；100 g | | standard | EN Standard 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012 | Licensing and Certification | UL recognized | cULus recognized, Class 2 power supply | E1 Type Approval | 10R-04 | Surroundings | Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | Mechanical properties | Connection type | 5-pin M12 x 1 connector
5-pin M12 x 1 socket
Built-in bridging | Housing material | PA | Ingress protection | IP68 / IP69K | weight | 240 g | Factory settings | Node address | 128 | Transmission rate | 250 kBit/s |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/倍加福束流超声屏障 UBE800-F77-SE2-V31 1开关输出PNP
产品简介：对射型超声波屏障，微型设计，高亮度的LED，用于上电和开关状态，高开关频率，系列：-F77，外壳直径：，外壳：聚碳酸酯，输出类型：1开关输出PNP，NO，感应范围：0 ... 800毫米发射器 ...
|
|
P+F/倍加福电感式传感器NBB4-12GM30-E2-V1 4mm
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/倍加福开关放大器 KFD2-SOT3-Ex2 24V DC
简介：K系列隔离式安全栅能够为用户提供全方位的解决方案，K系列安全栅保证现场设备和控制室之间可靠&经济的信号传送。无论用户单一的选择信号隔离模块或者进行大规模的系统集成，K系列产品都能 ...
|
|
P+F/倍加福电容式传感器 CBN5-F46-E2-10M 5mm
简介：P+F/倍加福 电容式传感器 CBN5-F46-E2-10M扁平外壳；反极性保护；束线带的固定槽，用于螺丝安装的通孔，通过cULus 认证，一般用途。
产品参数
...
|
|
P+F/倍加福电容式传感器 CJ2-18GK-N 2mm 非齐平安装
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/倍加福电容式传感器 CBN15-18GS75-E2 常开PNP
简介：P+F/倍加福 CBN15-18GS75-E2电容式传感器的测量通常是构成电容器的一个极板，而另一个极板是开关的外壳。这个外壳在测量过程中通常是接地或与设备的机壳相连接。当有物体移向接近开关时， ...
|
|
P+F inductive sensor NBB1,5-8GM40-Z0 1.5 mm
Introduction: Inductive proximity sensors are the preferred product for most applications that require non-contact, accurate detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality ...
|
|
P+F/倍加福电感式传感器NBN3-F31-E8-K-K 3 mm
简介：电感式传感器光滑或螺纹式不锈钢圆柱形外壳；反极性保护和短路保护；LED状态指示M8, M12接插件连接或端子接线方式；PVC，PUR或硅电缆出线方式；2线，3线，4线直流，交流，NAMUR输出方式以 ...
|
|
P+F Multiturn Absolute Encoder AVM58-H
Introduction: In this construction, the gear structure is added on the basis of the singleturn code disc, through these interconnected gears, we can measure up to 16,384 turns (14 bits), so that the total accuracy of the encoder is 16 bits (single turn) plus 14 bits (number of turns), or the total precision ...
|
|
P+F/倍加福电感式传感器 NBB3-V3-Z4 3 mm 齐平
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/倍加福电感式传感器NBN4-12GM50-E2-V1-Y89925
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/倍加福光学数据耦合器 DAD15-8P 弹簧端子
产品简介：光通讯系统支持存储与检索系统，传输车，自动导航车辆和单轨传输机之间的双向沟通。以此替代复杂且问题频出的电缆，滑环及其他传输方案。两个站点之间的传输由红外线光替代，它是由数 ...
|
|
P+F/倍加福背景抑制传感器 MLV41-8-HV-60-IR / 110 /124/167
产品简介：坚固的漫反射模式传感器，用于监测卷筒纸断裂，紧凑的外壳设计，前景和背景抑制，60毫米检测范围，红外光，推挽输出，微弱信号输出，M12插头，纸幅断纸控制和印刷机械专用设备，污染 ...
|
|
P+F/The capacitive sensor CJ10-30GK-WO has a working distance of 10 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/倍加福电容式传感器 CBB10-30GKK-W 感应面ABS
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/倍加福反射板型光电开关 ML100-55/103/115 紧凑型
产品简介：带偏振滤波片的反射板传感器，塑料外壳，5 m 检测范围，红光，灵敏度可调，亮时/暗时接通，直流型，PNP 输出，固定电缆, 紧凑型设计, 易于使用, 清晰的LED指示，电源，开关状态，稳定 ...
|
|
P+F/倍加福编码器 RVI58N-*******1 增量型
简介：增量型编码器旋转一圈提供一个固定数量的脉冲，速度是通过单位时间内测量的脉冲数计算。为了测量角度和位置，通常是从一个起始的参考点开始计数。增量型编码器精度取决于机械和电气的因素 ...
|
|
P+F/倍加福 增量式旋转编码器 10 - 2133 X
简介：倍加福增量型编码器旋转一圈提供一个固定数量的脉冲，速度是通过单位时间内测量的脉冲数计算。为了测量角度和位置，通常是从一个起始的参考点开始计数。双通道输出编码器，是具有两个具有 ...
|
|
P+F/倍加福三角测量传感器 OBT300-R100-2EP-IO-V31-L
产品简介：具有背景抑制的三角测量传感器，带多种安装选项的微型设计，同类中**佳的背景抑制器，精确的物体检测，几乎与颜色无关，扩展温度范围
我们以客户为中心的服务理念 ...
|
|
P+F/Capacitive sensor CJ6-18GK-N with a conductor cross-section of 0,75mm2
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
