On March 16, 19, Fuji Electric Power Semiconductor Symposium was held in Guangzhou. More than 90 customers and agents from all over the country were invited. Fuji Electric looks forward to carrying out in-depth communication with you based on the publicity and education content of this seminar, so that you can have a more detailed grasp of Fuji Electric's power semiconductors, and can be more comfortable in application, in addition, we also look forward to making some assistance for you in the selection of product development models according to the seminar.
Xu Guowei, Chief of the Semiconductor Operation Management Department of Fuji Electric (China) Co., Ltd., opened the curtain of the discussion on "A detailed introduction to Fuji Electric's enterprise and semiconductor materials work".
In a detailed introduction, Xu Guowei, the chief of the general section, looked back on the past three years. He emphasized that despite the ups and downs of market demand, as well as difficulties such as anxiety about the supply of semiconductor materials and a sharp increase in costs, Fuji Electric's sales performance in China has also increased by double digits every year.
In addition, according to incomplete statistical analysis, Fuji Electric's total sales of semiconductor materials are expected to grow by more than 20% year-on-year in fiscal 2018 by the end of the month. He made it clear that all this would not have been possible without the full support of all of you.
In the Fuji Electric Quality Control section, Section Chief Xiang made it clear that Fuji Electric Semiconductor Materials has a process management that controls product quality from the beginning of design. In addition, we use scientific research to improve the quality of goods, so that the failure rate after leaving the factory is minimized.
Then, in the description of the damage analysis section of the semiconductor material control module, he explained how to apply the characteristics of damaged products to distinguish the cause of damage and the analysis procedure of bad ones.
At the Fuji Electric Power Semiconductor Seminar, customers were able to learn about Fuji Electric's semiconductor materials in a comprehensive and systematic way. For Fuji Electric's colleagues, this is also a key service platform for close communication and discussion with customers. Based on a better understanding of customer needs, Fuji Electric Semiconductor's future development plan has been established.
The development trend of Fuji Electric semiconductor materials is inseparable from the unwavering support of our customers, and the achievement of product performance excellence and the exploration of market demand will also become a key topic of development direction for everyone. We are confident that in the future, we will work hand in hand with every customer to create new brilliance.
|
More on that
|
Fujifilm ultrasonic flowmeter and the relationship between installation and accuracy
Fujifilm ultrasonic flowmeter probe installation method and orientation. There are generally two types of probe mounting: the V method and the Z method, and experience has shown that the V method has a higher measurement accuracy than the Z method without affecting the signal reception. Since the V-method probe is installed for precise positioning, the measurement error mainly comes from the flow regime and ...
|
|
The MONITOUCH X1 Series, a programmable operation monitor, was released
Fuji Electric Corporation (Headquarters: Shinagawa-ku, Tokyo, President: Tsuhiro Kitazawa) has released the MONITOUCH X1 Series programmable operation display. With Windows*, you can collect information from the field to manage your work with just one monitor.
|
|
The industry and demand are integrated to accelerate the expansion of new areas
With the proposal of "Made in China 2025" and the increasing role of science and technology in promoting new industries, the automation industry has begun to pick up, and the inverter market has regained its vitality and vitality after the downturn in the first two years. As a world-renowned provider of electrical automation products and systems, Fujifilm ...
|
|
Fuji Electric Corporation has set sustainability goals with the aim of contributing to the realization of a sustainable society and the 2050 Environmental Vision
Fuji Electric Corporation (hereinafter referred to as "FE"), headquartered in Tokyo, Japan, under the leadership of President Mitsuhiro Kitazawa, is pleased to announce that it has established development goals*1 aimed at achieving a sustainable society, as well as a new policy called Environmental Vision 2050.
*1: Sustainability Goals...
|
|
Fuji Electric China will attend the 17th China International Environmental Protection Exhibition
On June 12, 2019, the 17th China International Environmental Protection Exhibition (CIEPEC2019) will be held at the China International Exhibition Center (Jing'an Zhuang Pavilion) in Beijing. More than 700 domestic and foreign exhibitors gathered together to showcase their environmental protection technologies and products. ...
|
|
Application of Fujifilm ultrasonic flowmeter in the semiconductor industry
Shanghai Jita Semiconductor, located in the Lingang New Area of the Shanghai Free Trade Zone, has a total investment of 35.9 billion yuan to build an 8-inch production line with a monthly production capacity of 60,000 pieces and a 50,000-piece 12-inch special process production line project and a production base of 300mm semiconductor silicon wafers of Shanghai Xinsheng Semiconductor. Lingang 2 iconic semiconductors ...
|
|
What is the influence of carrier frequency on inverters and motors? - Fuji Electric
【Question】What is the influence of carrier frequency on inverter and motor?
【Answer】1. The influence of carrier frequency on the output current of the inverter
(1) The higher the operating frequency, the larger the duty cycle of the voltage wave, and the smaller the higher harmonic component of the current, that is, the higher the carrier frequency, and the flatness of the current waveform.
|
|
Inverter repair cleverly replaces inverter parts
Although there are many types of inverter maintenance and the circuit is constantly updated, the faults are nothing more than overcurrent, overvoltage, undervoltage, overload, overheating, output unbalance, no display and other faults.
In the process of inverter maintenance, we often encounter some accessories for a while...
|
|
Focusing on intelligent manufacturing, the Fuji Electric Technology Exchange Conference in South China has set off another boom
On June 26, the "2019 South China Fuji Electric System Products Intelligent Manufacturing Technology Exchange Conference" jointly sponsored by Fuji Electric (China) Co., Ltd., China Transmission Network and China Motion Control Industry Alliance was held in the boutique exhibition area of China Motion Control Industry Alliance at the South China Automation Exhibition (Shenzhen Convention and Exhibition).
|
|
Introduction to instrument majors, future employment and development, etc
Instrumentation spreads through all sectors of the national economy and penetrates into all corners of people's lives. For example, in the machinery manufacturing industry, the static and dynamic performance of the product is tested, the processing process is controlled and monitored, and the fault diagnosis in the operation of the equipment is diagnosed. In the electric power, chemical, petroleum industries, ...
|
|
What are the key points for setting the PID function parameters of the inverter?
Take Fujifilm's FRENIC-VP (F1S)/MEGA (G1S) series inverters as an example: J01 PID control function activation. J01=0: PID does not operate, the inverter does not set the PID function or uses external PID adjustment. J01=1: PID positive action (negative feedback). J01=2: PID Reverse ...
|
|
Technology sharing ▏ Five common faults and solutions of ultrasonic flowmeters
Ultrasonic flowmeter and electromagnetic flowmeter are the same, because the instrument flow channel is not provided with any obstruction parts, are unobstructed flowmeter, is suitable for solving the difficult problem of flow measurement of a kind of flowmeter, especially in the large-diameter flow measurement has more prominent advantages, in recent years it is a rapid development of a ...
|
|
The normal selection and capacity matching of the inverter is actually very important!
In addition, it is unscientific to select the inverter body alone, without considering whether the inverter selection and capacity matching are appropriate. This will be covered in the following article
1. According to ...
|
|
Typical Cases | Leakage problem and treatment of lined magnetic flap level gauge in liquid chlorine tank level monitoring
1. Application and development of magnetic flap level gauge in liquid chlorine tank level detection
Liquid chlorine is a high-risk and highly toxic substance, which is highly corrosive, and once it causes leakage, it will cause great harm to the environment and the human body, so it is particularly important to ensure the safe operation of the liquid chlorine tank. And accurate and reliable control ...
|
|
How to set the motor characteristic parameters of the inverter - Fuji Motor
Do you know how to set the motor characteristics of the inverter-controlled mechanical equipment? Next, Sanke Inverter will introduce this aspect for you through the following content.
1. Parameters to be set for the motor
When the inverter (hereinafter referred to as the -VFD) is in the "vector control" (F0-03=1) mode ...
|
|
Fujifilm inverter – the 7th generation "X Series" industrial 1200V/2400A RC-IGBT module
In order to meet the market demand for miniaturization and high reliability of IGBT modules, Fuji Electric has developed RC-IGBTs (Reverse-Conducting IGBTs), which combine IGBTs and FWDs as single chips.
The combination of the 7th generation "X series" chip technology and packaging technology with RC-IGBT technology makes the 7th generation ...
|
|
Inverter to DCS Interference Handling Solution - Fuji Electric
The signal of the catalyst feed control valve of a company's DCS system (distributed control system) intermittently appears OOP (output signal line break) alarm, and the control valve is fully opened instantly, resulting in abnormal fluctuations in catalyst flow, which seriously affects the safe and stable operation of the device.
Fault cause analysis and treatment
...
|
|
Fuji Electric has completed a major upgrade of the FRENIC-MEGA series of general-purpose inverters
Fuji Electric Corporation (President: Tsuhiro Kitazawa, Head Office: Shinagawa-ku, Tokyo) is pleased to announce that it has completed a major upgrade of its FRENIC-MEGA series of general-purpose inverters in order to improve power at its production sites.
※Echo characteristics: output signal ...
|
|
Five common errors in instrumentation measurements
1. Method errors
It refers to the error caused by the imperfection of the measurement method used, the imprecise theoretical basis, and the inappropriate modification and simplification of some classical measurement methods, that is, all the factors that are not reflected in the expression of the measurement results, but in fact these factors play a role...
|
|
Ensuring food security is inseparable from the "black technology" of instrumentation
The people are the foundation of the country, the valley is the life of the people, diligence and thrift are the fine traditions of the Chinese nation, and food security is an important foundation for national security. At present, the security situation at home and abroad is complex, and the sudden outbreak of the epidemic has caused multiple challenges to global food security. October 16, 20201 is World Food Day.
|
|
Contact
working hours
