Inverter repair cleverly replaces inverter parts

Create Date: 2024-8-30 12:03:23|Source: Fuji Electric/Fujielectric

Although there are many types of inverter maintenance and the circuit is constantly updated, the faults are nothing more than overcurrent, overvoltage, undervoltage, overload, overheating, output unbalance, no display and other faults.

In the process of inverter maintenance, we often encounter the dilemma that some parts cannot be found for a while. Then, at this time, we need to use the experience we have accumulated in our daily life to skillfully replace the infrequently used parts with common ones. The following are a few small methods of the author, and I also ask the master to teach and add more and better methods:

First, if the 7805 is broken, a 4733 regulated diode can be connected in series with a resistor of tens to hundreds of ohms to form a 5V regulated output. As long as the current output capacity and the power of the resistor are well understood, this method is completely feasible.

Second, the rectifier is fried with a thyristor, which can be replaced with a contactor. Use the 12V or 24V electricity of the switching power supply to drive a relay, and then the relay drives the contactor to engage, so that the cost is less.

Third, the rectifier part of the integrated module is damaged, which can be replaced by a three-phase rectifier bridge. However, this method must strictly cut off the original damaged rectifier part. Prevent the occurrence of ignition and short circuit.

Fourth, the triode that controls the operation of the fan is burned out, and it is difficult to find such a large current tube for a while, you can directly short the CE level of this triode. Let the fan run uncontrolled 24 hours a day. Because the fan itself can't consume much energy, it's nothing compared to the power consumption of the motor of the inverter itself.
Inverter repair cleverly replaces inverter parts

More on that
Adopt the "ancient tree" Fuji Electric of East China Normal University to practice the concept of "green development". Adopt the "ancient tree" Fuji Electric of East China Normal University to practice the concept of "green development".

With the conclusion of the 19th National Congress of the Communist Party of China, the spirit of the major conferences has been newly conveyed. Among them, General Secretary Xi Jinping said that in order to practice the concept of green development, we must establish and practice the concept that lucid waters and lush mountains are invaluable assets, and to protect the ecological environment is to protect productivity, and to improve the ecological environment is to develop the ecological environment.

Which flowmeter is used to solve the quantitative control of diesel flowmeter? Which flowmeter is used to solve the quantitative control of diesel flowmeter?

What kind of flowmeter can be used to measure the quantitative controller of diesel flowmeter, and how to measure it? A: Diesel flow quantitative metering, which can be performed using the flow quantitative control cabinet system, while diesel flow measurement, which can be measured using ultrasonic flow meter, ultrasonic flow meter, measurement precision ...

Fuji Electric - How to deal with inverter interference Fuji Electric - How to deal with inverter interference

In the field, the interference of the frequency converter is more frequent and more serious, and even causes the control system to be unable to be put into use. The operating principle of the inverter is destined to produce strong electromagnetic interference. The inverter includes a rectifier circuit and an inverter circuit, and the input alternating current passes through the rectifier circuit and the flat wave.

Typical Cases | Leakage problem and treatment of lined magnetic flap level gauge in liquid chlorine tank level monitoring Typical Cases | Leakage problem and treatment of lined magnetic flap level gauge in liquid chlorine tank level monitoring

1. Application and development of magnetic flap level gauge in liquid chlorine tank level detection Liquid chlorine is a high-risk and highly toxic substance, which is highly corrosive, and once it causes leakage, it will cause great harm to the environment and the human body, so it is particularly important to ensure the safe operation of the liquid chlorine tank. And accurate and reliable control ...

The semiconductor market is booming, and Fuji Electric's industrial pattern is rapidly improving The semiconductor market is booming, and Fuji Electric's industrial pattern is rapidly improving

The Semiconductor Industry Association (SIA) recently announced that global semiconductor sales in June 2017 reached $32.6 billion, up 2.0% compared with the previous month; This is a 23.7% surge compared to the same period last year. Semiconductor sales in the second quarter of this year were US$97.9 billion, up 5.8% quarter-on-quarter and 23.7% year-on-year; This year...

Fuji Electric employees work together to contribute to the natural ecology Fuji Electric employees work together to contribute to the natural ecology

Because the waters are intersected and connected, the waste discharged by each country and region is concentrated in the deep sea, and marine garbage has long become a global problem. Most of the marine debris is concentrated in five untouched areas, each of which falls in the Pacific Ocean of China, which is larger than the ...

There are a few simple steps that need to be commissioned when a drive is put into operation There are a few simple steps that need to be commissioned when a drive is put into operation

1. Ground the ground terminal of the inverter. 2. Connect the power input terminal of the inverter to the power supply through the leakage protection switch. 3. Check whether the factory display of the inverter display window is normal, if it is incorrect, it should be changed to reset the operation, if it is still incorrect, it should be returned. ...

There are always answers to common questions about the use of inverters and transmissions, there are always things you don't know There are always answers to common questions about the use of inverters and transmissions, there are always things you don't know

1. Why is the leakage circuit breaker easy to trip when using the inverter? This is because the output waveform of the inverter contains higher harmonics, and the motor and the cable between the inverter and the motor will generate a leakage current, which is much larger than that when the motor is driven by the power frequency. ...

Fuji Electric – How to improve the operating temperature of the inverter Fuji Electric – How to improve the operating temperature of the inverter

After the inverter runs uninterrupted for a long time, the high temperature generated inside has serious hidden dangers to the operation of the inverter, especially in summer. The ultimate operating temperature of the inverter inside the inverter is generally 125 °C, and the temperature of the inverter inverter module and IGBT can sometimes reach 110 °C.

Differences and characteristics of portable ultrasonic flowmeters and electromagnetic flowmeters Applications Differences and characteristics of portable ultrasonic flowmeters and electromagnetic flowmeters Applications

The flow meter is one of the important instruments in the water, petrochemical and other industries, which can be compared with the eye of measurement. For the water conservancy industry, it is of special significance. For example, the addition of chemicals in the water supply industry, if the accuracy of the relevant metering instrument is not high, it will directly affect the quality of water quality.

Consideration of CO2 emission reduction and progress towards a carbon-free society Consideration of CO2 emission reduction and progress towards a carbon-free society

Shanghai has issued a red high temperature warning for several days, and the temperature of 40.9°C has tied the highest record since 1873. The root cause of the continuous high temperature and heat wave events in many places in the northern hemisphere is believed to be the global warming trend. Global warming is happening at an unprecedented rate, and several ...

Fuji Electric - How exactly does a frequency converter work? Fuji Electric - How exactly does a frequency converter work?

Since the advent of automatic induction motors, variable frequency operation has existed in the form of alternators. Change the rotational speed of the generator, and change its output frequency. Before the advent of high-speed transistors, this was one of the main ways to change the speed of the motor, but due to the generator speed ...

Introduction to the advantages and disadvantages of ultrasonic level gauges Introduction to the advantages and disadvantages of ultrasonic level gauges

Ultrasonic level gauge is a non-contact instrument that uses the principle of echo ranging. The echo ranging principle is also known as the travel time or travel time measurement principle. It emits energy waves through a device that can emit energy waves (generally pulse signals), and the energy waves are reflected when they encounter obstacles, and are reflected by a ...

City water company, the contradiction of "supply and demand", how to solve the Fujifilm portable flowmeter application City water company, the contradiction of "supply and demand", how to solve the Fujifilm portable flowmeter application

The measurement of urban pipe network flow is an important task of water supply enterprises in pipe network management. In the past few years, our company has used Japan Fuji portable ultrasonic flowmeter to measure water consumption for large water users, and persuaded and alleviated the "supply and demand" contradiction between these enterprises and companies with scientific data; Especially...

Inverter control motor leakage causes and measures Inverter control motor leakage causes and measures

The cause of the leakage problem We all know that the three-phase stator winding of the motor flows through the current to produce a rotating magnetic field, according to the principle of magnetoelectric induction, the shell of the motor will produce an induced electromotive force, the size of this electromotive force depends on the size of the switching frequency of the inverter IGBT, due to the high ...

The MONITOUCH X1 Series, a programmable operation monitor, was released The MONITOUCH X1 Series, a programmable operation monitor, was released

Fuji Electric Corporation (Headquarters: Shinagawa-ku, Tokyo, President: Tsuhiro Kitazawa) has released the MONITOUCH X1 Series programmable operation display. With Windows*, you can collect information from the field to manage your work with just one monitor.

Introduction to the application case of Fujifilm ultrasonic flowmeter in power plant flow measurement Introduction to the application case of Fujifilm ultrasonic flowmeter in power plant flow measurement

Due to the outstanding technical application advantages of Fujifilm ultrasonic flowmeter, Fujifilm ultrasonic flowmeter has been widely concerned in various fields such as power plant flow measurement, which can be reflected from the following application cases. Circulating water flow is measured in hydropower plants ...

Fuji Electric's Power Semiconductor Symposium officially kicked off Fuji Electric's Power Semiconductor Symposium officially kicked off

On March 16, 19, Fuji Electric Power Semiconductor Symposium was held in Guangzhou. More than 90 customers and agents from all over the country were invited. Fuji Electric looks forward to carrying out in-depth communication with you according to the publicity and education content of this seminar, so that everyone can have a good understanding of Fuji Electric.

Fuji Electric and PetroChina jointly established Kunlun Fuji Instrument Company Fuji Electric and PetroChina jointly established Kunlun Fuji Instrument Company

On the morning of June 1, the opening ceremony of Wuxi Kunlun Fuji Instrument Co., Ltd. was held. Gong Peixing, chairman of the Wuxi CPPCC, was invited to attend the ceremony, and some responsible comrades of the new district participated in the event. In his speech, Chairman Gong said that the Wuxi Municipal Government and the New District Management Committee will continue to support...

What are the key points for setting the PID function parameters of the inverter? What are the key points for setting the PID function parameters of the inverter?

Take Fujifilm's FRENIC-VP (F1S)/MEGA (G1S) series inverters as an example: J01 PID control function activation. J01=0: PID does not operate, the inverter does not set the PID function or uses external PID adjustment. J01=1: PID positive action (negative feedback). J01=2: PID Reverse ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top