H1000 The new Yaskawa "H1000" heavy-duty inverter plays a stable and outstanding role in the heavy-duty industrial field! Capacity range 200V class 0.4-110kW 400V class 0.4 - 355kW apply Lifting Machinery, Fluid Machinery, Metalworking Machines ...

Second, the wiring of the control circuit The control circuit of the inverter can be roughly divided into two types: analog and digital. 1. The wiring of the terminal of the control circuit should use shielded wire or twisted pair wire, and it must be separately routed from the main circuit and the strong current circuit (including the 200V relay program circuit). ...

1. The LED light is green, but the motor does not move (1) Cause of failure: The motor in one or more directions is prohibited from operating. Solution: Check the +INHIBIT and –INHIBIT ports. (2) Cause of failure: The command signal is not to the driver signal. ...

Yaskawa EPX2050 robots are often used in the automotive and other industrial painting fields to complete a variety of spraying operations, but long-term operations require the use of robot protective clothing to protect them. The following is a brief introduction to how Yaskawa EPX2050 spraying protective clothing is customized. Yaskawa EPX205 ...

1. Due to the soft material of the bolt material inside the Yaskawa inverter, if the tool is matched with a large error, it is easy to cause damage to the bolt head, it is recommended to equip the maintenance personnel with special tools of imported or joint venture brands. 2. The electrolytic capacitor and heat sink are made of aluminum alloy.

1. Compressor load Compressors are also widely used loads. Low-pressure compressors are widely used in various industrial sectors, and high-pressure large-capacity compressors are widely used in steel (such as oxygen generators), mines, fertilizers, and ethylene. The use of frequency conversion speed regulation, all bring small starting current, ...

Yaskawa inverter Uv1 fault name: main circuit undervoltage If the operation command is not entered (the inverter is stopping), the following conditions occur. 1. The DC voltage of the main circuit is lower than the set value of L2-05 (the detection value of the undervoltage (UV) of the main circuit). 2. 200V class: about 190V ( ...

At present, the mainstream servo drives all use digital signal processors (DSPs) as the control core, which can realize more complex control algorithms and realize digitalization, networking and intelligence. Power devices generally use the drive circuit designed with intelligent power module (IPM) as the core.

1. Determine mechanical specifications, load, rigidity and other parameters; 2. Confirm the action parameters, stroke, accuracy, acceleration and deceleration time, cycle, moving speed, etc.; 3. Select motor inertia, load inertia, motor axis conversion inertia, and rotor inertia; 4. Select the motor back ...

1 Introduction Over the years, Yaskawa has accumulated very rich experience in the petroleum industry, such as G7/P7/F7/G5/P5/G5HHP/VS and other different series of inverters have been widely used in OEMs, the main fields are centrifugal separators, pumps, fans, transportation equipment ...

Servo motor refers to the engine that controls the operation of mechanical components in the servo system, and is a kind of auxiliary motor indirect transmission device. The main function is to use it in a closed ring, transmit the signal to the system at any time, and at the same time correct its own operation with the signal given by the system. Servo motor ...

Before answering this question, we must first understand the purpose of servo motors, compared with ordinary motors, servo motors are mainly used for precise positioning, so what we usually call the control servo is actually the position control of the servo motor. In fact, the servo motor also uses two other kinds of ...

1. When the oscilloscope checks the current monitoring output of the driver, it is found that it is all noisy and cannot be read Cause of failure: The output terminal of the current monitoring is not isolated from the AC power supply (transformer) Solution: It can be detected and observed with a DC voltmeter. 2. The motor is in one square ...

Servo drive is a kind of controller used to control servo motor, its function is similar to that of an inverter acting on an ordinary AC motor, which is a part of the servo system and is mainly used in high-precision positioning systems. Servo drive is an important part of modern motion control, which is widely used.

First, the working principle is different Stepper motor controller: It is an electronic product that can send out a uniform pulse signal, and the signal it sends out enters the stepper motor driver, which will be converted by the driver into a strong current signal required by the stepper motor to drive the stepper motor to run. Stepping ...