With the increasing functional requirements of industrial production, the continuous optimization of process levels and the escalation of the complexity of production conditions, systems that effectively record and manage relevant data are particularly important for machine safety, especially for production safety. PITreader Authorization ...

1. Y0 is connected to one end of the coil A1 of KA1; 2. The other end of KA1, A2, is connected to 24V; 3. Y1 is connected to A1 at one end of the coil of KA2; 4. The other end of KA2 A2 is connected to 24V; 5. COM terminated to 24V. ...

The safety control system generates a large amount of data at all times while ensuring the safety functions of its equipment. For example, when the E-STOP button is pressed, when someone opens a certain safety door, who switches the machine to service mode when, etc. This data is important for device managers ...

Pilz's safety validation services for plants and machines can now be customised to suit your needs, choosing between three different validation levels. This guarantees an efficient service tailored to individual requirements, allowing plants and machines to be designed in accordance with standards and with maximum safety. In the wind ...

1. The mount can be quickly replaced. 2. For low-value and easy-to-purchase multi-leg assemblies, destructive removal methods can be employed to prevent board stepping on. For this type of relay, use pliers to break it off and then use a set with a semicircular or triangular file.

The technology and business of rail freight have remained the same for decades. Until now, in order to test the brakes of freight trains, the crew would walk around the entire train and hit each axle with a special hammer to check the proper operation of the braking system. Rail transport systems in Austria ...

An autonomously running burner management system has a complex structure and must comply with many international standards. Due to the high level of danger, strict safety regulations need to be applied to avoid the presence of unburned fuel in the combustion chamber. Pilz has a safe burner management system specifically tailored to these requirements. ...

The technology and business of rail freight have remained the same for decades. Until now, in order to test the brakes of freight trains, the crew would walk around the entire train and hit each axle with a special hammer to check the proper operation of the braking system. Rail transport systems in Austria ...

The two-handed button is a commonly used safety start device, which is commonly used in punches, presses, cutting machines and other equipment; The purpose is to force the operator to leave the danger zone with his hands when driving the machine, so as not to come into contact with dangerous moving parts and cause safety accidents. 　　The "standard" of two-handed control says ...

From June 12 to June 16, 2023, Pilz will be present at the THERMPROCESS trade fair in Düsseldorf, Germany, at booth B10 in Hall 9. Germany Düsseldorf Thermprocess is Germany most important trade fair for industrial furnaces and heat treatment ...

With the rapid development of industrial technology, on-site equipment is also developing towards a high degree of integration and automation. But no matter how the technology develops, behind the dazzling technology, the basic common equipment is always a solid backing. The hydraulic press is one of the old industrial basic equipment, and it is almost ...

Optimal safety gate and position monitoring via safety switches Safety switch Safety switches can be used in a variety of applications: When the guards are opened, dangerous machine movements must be stopped and restarts must be prevented. These guards must be prevented from failing or being manipulated. ...

As one of the core equipment of smart factory logistics, automatic guided vehicles (AGVs) play an increasingly important role in the factory logistics automation system. They travel through the warehouse and complete the handling task efficiently, which brings great convenience to the production, but also has certain safety hazards.

1. First of all, press the safety relay overload protection button directly by hand. 2. Secondly, make its contacts recover and be in a closed state. 3. Finally, you need to wait for 3 minutes to be able to proceed, through the adjustment screw, choose a slotted screw, and go deep into the bottom ...

IO-Link is an open sensor communication protocol that represents a powerful and standardized (IEC 61131-9) connection technology in the field of point-to-point communication and is fieldbus and system independent. The communication protocol will also be used for functionally safe data exchange in the near future. The advantages of IO-Link are ...

PNOZ m EF EtherCAT FSoE is a forthcoming safety bus communication module from Pilz that supports the FSoE (FailSafe over EtherCAT) protocol. As a new member of the PNOZ multi 2 family, the module can be used as an FSoE master with a maximum cycle time of 10 ms ...

When using Pilz safety gate switches in series, the following points need to be noted: 1. The installation position of the switch must meet the design requirements of the safety gate control system to ensure that no accidents will occur during operation. 2. When connecting the circuit, it should be in accordance with the ...

Power supply: AC: Terminals A1 and A2 are connected to the power supply, and the ground wire is connected to the protective ground. DC: A2 is connected to the ground terminal of the power supply. Start-up loop: Auto-start: S13-S14 shorted. Manual monitoring start-up mode: S33-S34 ...

1. The shape is larger The dimensions of safety relays are different from ordinary relays, and safety relays are larger. 2. Modules instead of components A safety relay is a module, not an electronic component like a normal relay. 3. Color Quiet...